Lloyd introduces our exciting new Bullpup conversion options for Air Arms S400 / 410 / 510, Weihrauch HW100, Hatsan AT44-10 & Benjamin Marauder air rifles
what a fantastic idea. I think other manufacturers will catch on to this idea. I would have one for my daystate wolverine Lloyd. 2 rifle designs in 1. 🖒👍🖒👍🖒
what happens about the safety catch on the S510 trigger ? that seems like it will be non functional when it is extended as its buried inside the stock ?
Did you know the fps off the bereatta apx co2. Because I can't find it on utude. And my local air gun supplier I see doesn't no. Good videos. Cordy 1.77...
Shame the Camera focus is so far out .. Would have been a great video otherwise, The rifles on the far left shelf are in focus, Sadly though the Air arms and the new Bullpup stop arnt .
Love the stock, I wonder what my old CZ s200 would look like in one. Thing is, despite its foibles (why oh why did they put that plastic bolt on it?) It's original , very accurate, light and great fun........ still I can't help wondering. Now Lloyd, you know your onions and you're not too bad looking, but the channel would be improved greatly if you were replaced by a golden skinned young thing in a bikini.
+mag81 I think the S510 we used was the latest version where they have fitted the standard length cylinder, the early S510's had the carbine cylinder which wouldn't reach the end of the stock.
+Lloyd Schober cool thanks i reckon the air cylinder on the xtra fac is 6 inches longer than that one the video, just tryin to get an idea of what it'd look like in it, thanks for the reply
Not sure if this has been asked but the hw 100 bull pup cylinder holder would that fit the a&m custom cylinder just as it is slightly wider than the stock one, cheers, 👍
I do like the look of that. Lloyd, just a quick question... Is there such a thing as a semi auto - PCP Air rifle and are they even legal? I am sure that a friend of mine said he saw one sometime, but could not remember any details. Many thanks.
+jjab99 Most semi-auto air rifles are illegal according to the gun trade association , the only ones that are legal are low powered stuff like the Crosman 1077 and the incoming SIG MPX.
+jjab99 a friend of mine as had a semi auto sent to him from steyr and despite a certain editors objections acpo have upheld that under 12ftlbs its legal at the moment and he has done a video with the airgun in use..
Legal at the moment sounds like it might not be for long. I think in the current climate that the government are getting a little paranoid about all kinds of guns and even though the vast majority of gun owners are good people, they are presented to the media as potential terrorists! The odd thing is, the terrorists don't have a problem getting hold of all kinds of weapons and explosives, it's just poor innocent victims that cannot get hold of a gun to defend themselves. Still, best get off my soapbox, I would like to own a semi-auto PCP as I think for hunting, the ability to have an immediate follow up shot would be very handy and humane indeed. Maybe one day?
I'm looking to purchase the ultimate sporter .22 I hear that airarms are bringing out a pup in April but I was thinking of going for the sporter and a bullpup stock. what would you say to this. thanks in advance.
+kempouk I like the Ultimate sporter, not sure about the Bullpup yet as we haven't handled it . I think its personal choice but buying the sporter and a stock will still work out cheaper than the new Galahad.
+RegisteredTrademark Only the standard length sorry . The carbine wasn't made for very long and there aren't many about so I don't think VIT will be in a rush to make one specifically sorry
+kempouk We haven't got an exact price on the Galahad yet, and there are also numerous options but the cheapest ( beech, non-regged ) will be about £950-£1000
+peter howden I think the standard S510 stock will fit as the back end of the gun is the same. Only thing would be check the barrel sleeve diameter . Send me the size to sales@airgunbuyer.com and I will check it out.
Craftsman Vit does not make one so only option is buying the factory Cometa bullpup stock but I have no idea if it will fit the Lynx ( We don't stock Cometa so not experts)
+Lloyd Schober Great. I'd like one for my 25 cal Hatsan AT44-10 long, unshrouded. (Gun is about 1.5 yrs old, purchased in the U.S). Will this model be included? Will u ship to US and can I send you a deposit?
I'm absolutely in love with the bullpup rifles one try and I was hooked
I got the AT44 stock from Vitaliy 6 months ago, well finished and excellent quality!
what a fantastic idea. I think other manufacturers will catch on to this idea. I would have one for my daystate wolverine Lloyd. 2 rifle designs in 1. 🖒👍🖒👍🖒
can't wait to get my hw100 in one of these pup kits :)
great news mate . loved the video
Nice demo Lloyd, looking forward to the Compatto review.
+HuntersVermin Hoping the Compattos will be here in the next couple of weeks :)
Love those but I love the wildcat you sold me more. I can’t get over how good it is.
The Wildcat is a superb gun , glad you like it :)
looking forward to see the HW 100 stock.
+fedaykeen We have got one in the shop, its gorgeous !
Nice job!
nice video and stock and kit bud..
Now, that stock is pretty cool buddy and hope you do well with sales ;o))))
+waddac2 Thanks , it looks like they are going to be as popular as they deserve as we have already had a lot of interest in them :)
what happens about the safety catch on the S510 trigger ? that seems like it will be non functional when it is extended as its buried inside the stock ?
Yes it is non-functional, but due to most people really disliking the safety I don't think its that much of an issue ?
Think I'm in love :)
Looks like it needed 3-5 inches more length of pull to me. You seemed cramped up when shouldered
How often do you need to re sight in the scope after you keep slapping it on top?
+Randy Williams Never. Those scopes are shock resistant :)
I like this conversion. For HW100 FSB, what modification is necessary? Thanks
nice i like it very much.
Best air rifle in the world so easy to maintain reliable and made in the uk
Good vid Lloyd. Where are you's moving to? Staying in Blackpool? Looking forward to seeing the compatto mate
+VerminSniperUnit We are only moving Video production , the shops staying put :)
Looks absolutely amazing I have an s510 sl hunter any issues with fitment
+Matt Jupp No issues at all Matt :)
Playing the scope like a bongo
Did you know the fps off the bereatta apx co2. Because I can't find it on utude. And my local air gun supplier I see doesn't no. Good videos. Cordy 1.77...
They produce about 380 fps with BB's.
Sweet
Shame the Camera focus is so far out .. Would have been a great video otherwise, The rifles on the far left shelf are in focus, Sadly though the Air arms and the new Bullpup stop arnt .
hello, please can you send the kit do Slovakia ?
Yes we can Minos :)
A better looking bullpup than the Gallahad
That isn't difficult ;)
have you seen the Hatsan gladius bullpup.its not a looker.
+Andrew Lambert I have yes Andrew, If we get one I will do a review but you are right, it isn't pretty :(
Good evening!
How to get the marauder's position change kit to turn into bullpup with the butt on wood. I live in Brazil !
Best regards!
Love the stock, I wonder what my old CZ s200 would look like in one. Thing is, despite its foibles (why oh why did they put that plastic bolt on it?) It's original , very accurate, light and great fun........ still I can't help wondering. Now Lloyd, you know your onions and you're not too bad looking, but the channel would be improved greatly if you were replaced by a golden skinned young thing in a bikini.
Is that a full sized s510 in the video? Just wondering would mine look as compact in that stock, mine is an full sized xtra fac.
+mag81 I think the S510 we used was the latest version where they have fitted the standard length cylinder, the early S510's had the carbine cylinder which wouldn't reach the end of the stock.
+Lloyd Schober cool thanks i reckon the air cylinder on the xtra fac is 6 inches longer than that one the video, just tryin to get an idea of what it'd look like in it, thanks for the reply
Keen on that pup kit for my s410 but mines the take down version
Will it still work?
Not without putting a new back block on your TDR, can be done just a little more of a fiddle.
Not sure if this has been asked but the hw 100 bull pup cylinder holder would that fit the a&m custom cylinder just as it is slightly wider than the stock one, cheers, 👍
+silone74 Just checked an A&M cylinder and it fits :)
+Lloyd Schober 👍 cheers.
I do like the look of that.
Lloyd, just a quick question... Is there such a thing as a semi auto - PCP Air rifle and are they even legal? I am sure that a friend of mine said he saw one sometime, but could not remember any details.
Many thanks.
+jjab99 Most semi-auto air rifles are illegal according to the gun trade association , the only ones that are legal are low powered stuff like the Crosman 1077 and the incoming SIG MPX.
Cheers Lloyd, I thought that it sounded a little odd. Many thanks.
+jjab99 a friend of mine as had a semi auto sent to him from steyr and despite a certain editors objections acpo have upheld that under 12ftlbs its legal at the moment and he has done a video with the airgun in use..
Legal at the moment sounds like it might not be for long. I think in the current climate that the government are getting a little paranoid about all kinds of guns and even though the vast majority of gun owners are good people, they are presented to the media as potential terrorists! The odd thing is, the terrorists don't have a problem getting hold of all kinds of weapons and explosives, it's just poor innocent victims that cannot get hold of a gun to defend themselves. Still, best get off my soapbox, I would like to own a semi-auto PCP as I think for hunting, the ability to have an immediate follow up shot would be very handy and humane indeed. Maybe one day?
+moonbear Thats odd because the home office say they are illegal Del.
I'm looking to purchase the ultimate sporter .22 I hear that airarms are bringing out a pup in April but I was thinking of going for the sporter and a bullpup stock.
what would you say to this.
thanks in advance.
+kempouk I like the Ultimate sporter, not sure about the Bullpup yet as we haven't handled it . I think its personal choice but buying the sporter and a stock will still work out cheaper than the new Galahad.
their Allen screws! the tool is an Allen key
Yep, we all make mistakes, just as you wrote 'their' instead of 'there' :)
@@blackpoolairrifles9311 you'll have to try/test/show one of those new pcp rifles with in built pump .got to be a seller as long as quality is there😉
Hi Lloyd will the bullpup retro stock fit the AA S410 TDR? it looks brilliant.
Not tried a TDr but its very unlikely due to the different back end. I will try and fit one sometime this week.
Thanks Lloyd much appreciated would very much like to get one as they look really cool 😊
Yes do you sell hang guns at all thank you
We sell air pistols , 2 cabinets full of them :)
The bolt looks in a horrible place for reloading, did anyone do this and how did they find it ?
Tightening grubscrews onto the air cylinder????
Hi - Any Bullpup conversions for the Daystate Wolverine in the pipe line?
+Little C No sorry :(
That's if possible. Cordy 1.77....
Would this fit a 510SL Carbine action?
+RegisteredTrademark Only the standard length sorry . The carbine wasn't made for very long and there aren't many about so I don't think VIT will be in a rush to make one specifically sorry
how do i go about getting one for a hw 100 really want one
+1001space We will have them on our website next week : www.airgunbuyer.com
cheers will look back end of next week
From Ukraine, how's that going to progress with the current situation there? ☹
It's already not good, I haven't been able to get in touch with Vit for the past two weeks :(
@@LloydSchober That's sad, the whole situation over there is crazy, and there doesn't seem to be any sensible solution....
@@mikehunt8968 the solution is Russia fucks off out of their country???
ps how much are you selling a sporter for and how much will you be selling the airarms bullpup for.?
+kempouk We haven't got an exact price on the Galahad yet, and there are also numerous options but the cheapest ( beech, non-regged ) will be about £950-£1000
thanks for that information.
Hi do they do the bullpup for the air arms 510 xtra fac
+peter howden I think the standard S510 stock will fit as the back end of the gun is the same. Only thing would be check the barrel sleeve diameter . Send me the size to sales@airgunbuyer.com and I will check it out.
I have a Tricky one, looking for Cometa lynx v10 .22, bullpup stock, by any chance you have it available and the price.
We can supply Cometa airguns but we cannot export air rifles, UK only sorry.
I Already have the Cometa Lynx, I'm looking for bullpup stock to convert my lynx into a bullpup
Craftsman Vit does not make one so only option is buying the factory Cometa bullpup stock but I have no idea if it will fit the Lynx ( We don't stock Cometa so not experts)
Do you know when the Hatsan AT44 conversion kit will be available?
+Anthony Webster We are getting them to order, delivery is about 3 weeks :)
+Lloyd Schober Great. I'd like one for my 25 cal Hatsan AT44-10 long, unshrouded. (Gun is about 1.5 yrs old, purchased in the U.S). Will this model be included? Will u ship to US and can I send you a deposit?
If your barrel is about 15.5mm diameter it will fit , but evidently some of the At44's for different markets have different diameters.
+Lloyd Schober Thanks. I'll check.
+Anthony Webster My barrel is 15.9 mm. I have a good drill press if its just a matter of drilling out a barrel band a bit.
Hello place what you price for Benjamín marauder2. Thanku
Stock is £299
are you going to do an r10 bull pup stock
+glen curtis I hope so , but might be a few months before the manufacturer catches up with back orders for the guns he is already making for.
Any bullpup kit for Styer H5A? Tks
No sorry :(
Let me know if it comes available
Will do :)
do you have kral puncher pcp magazine?
Yes we do :)
What is price?
How to avail bullpup like that sir
You can buy the gun then contact Craftsman Vit to send you a stock.
nothing for the bsa r10 then?
Not yet Chris, but Craftsman VIt is working on the model now :)
Happy days, keep me informed, ready when you are.
any in laminates or other bling finishes other than walnut?
sighting can be a problem
I want to buy an air rifle
Can you export to India
From India
Not any more sorry.
Im making my own, way to much for what it is .
Go for it . Like to see pictures when finished with a costing for your materials and time.
Why too much mate its a stock not a rifle
300£ what a joke!.. thats just crasy pricing! Its cheaper to buy another gun...
The great thing is , you aren't forced to buy one :)
Chinese pcp air better than any European PCP.
Let me guess, you own a chinese PCP manufacturer ?