Hot Tap Procedures: 1. A hot tap saddle or weld nozzle installed, valve installed, assembly is pressure tested and hot tap machine attached. 2. Valve opened, hot tap completed, coupon or cut portion retained by latches on pilot drill. Pressure is contained within the hot tapping machine. 3. Cutter and coupon retracted and valve closed. Fluid is drained and hot tapping machine is removed. The tapped valve is now ready for the contractor’s tie-in or IFT’s linestop/stopple equipment to be inserted.
what kind of weld material is used. I am assuming that liquid they wipe the pieces with, correct? I just can't believe that with that pressure a liquid well is more than enough.
Hot Tap Procedures:
1. A hot tap saddle or weld nozzle installed, valve installed, assembly is pressure tested and hot tap machine attached.
2. Valve opened, hot tap completed, coupon or cut portion retained by latches on pilot drill. Pressure is contained within the hot tapping machine.
3. Cutter and coupon retracted and valve closed. Fluid is drained and hot tapping machine is removed. The tapped valve is now ready for the contractor’s tie-in or IFT’s linestop/stopple equipment to be inserted.
Damn well said
what kind of weld material is used. I am assuming that liquid they wipe the pieces with, correct? I just can't believe that with that pressure a liquid well is more than enough.
@@abbeyomisol electrofusion poly welding
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
I have worked in the waterworks supply business in the states for several years, but this is my first exposure to this technology. Very impressive
What is the normal/old procedure for the same job?
Every great product starts with great materials.
We're not allowed to hand peel or scrape here in nz
You guys have real tools wow! Good job!
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
This is pipefitting right?
What is the name of this device that is used to perforate the tube
that was a clean job, good stuff
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Done right ... looks like a winner.
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Piękna praca i zawór zamyka "sikovkama"
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Alot of faith in them heat welds.Yes I know apperentlty it is stronger then the actual pipe but still ?
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Secondly, where in the world do they open and close the valve with a wrench?
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
how the water pass???
they didnt make hole?
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Are those roots, or custom cut flooring for this job?
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Main line 400mm dia is polyurethane so easy to work. If its Cast iron/Steel then ? How you will do then same job?
Nearly the same but not so fast. Shut off Main, Let it Empty out, Cut Main, Insert T+adapters, fill Main
Pretty much same. In finland we have these drilling bands to put on the pipe and the just drill the hole same way as they did
Compression fittings. Called a tapping saddle.
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
In the states thats an 8x12" trap what's your charge? In ohio I get $875.00 takes me 45 minutes from time i show up
mostly on ductile iron now solvent welds'
The plug you cut just goes into the main ? Seems like it will cause problems down the line somewhere. But I'm a sewer guy:-). Pipe bursting
No it’s in the cutter at 6:50 as a black cutout
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
What was the adhesive?
I believe it´s electrofusion. You can see it at 3:24
Has a built in iron in the fitting that melts the plastic to bond together, I work with the stuff and still don’t trust them lol
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
That is one damn strong adhesive !
I believe it´s electrofusion, not an adhesive. You can see it at 3:24
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Do you have an American distributor?
What are you needing?
Not yet, if You need more information- We would be happy to help office@foxfittings.com
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Brilliant my friends
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Please let me know how to join 20mm HDPE pipes ,bends and flanges
@SivierUtilities Or just use plasson push fits
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Excelente, muy buenos técnicos, felicitaciones ,soy experto en plásticos reforzados y FRP.
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Good work
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Y a-t-il du travail avec vous?
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Top job lads
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Wonderful I am a fan of this profession I want a website to get a welding certificate
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
brawo
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
More on the product? Minimize the cost ot the machine...
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Not nice to use a pipe wrench for closing the valve!
Milan Dupal it was a special wrench made for closing a valve look again not a pipe wrench
Why not?
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Nice!!
Acme tapping LLC nice job!!
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
valve take one man. Because every one look like jhon cena😊😊😊
thats cool ! like the music too, thanks for posting
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
zajebiście :D
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Amazing
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
Pracowałem przy wodociagach 10 lat i stwierdzam że panowie się za długi pierdola.....
No to wiedz że się chuja nauczyłes przez 10 lat :)
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
I am a plumber I have 12 year experience in my work Pakistan
good job , but i need for hot tapping oil and gas
Its also for gas
أحمد الخليفة where is is located your company
I’m gas oil gas pipe line material Supplire in Qatar if you have any query so plz contact me on this number 009474491898
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
An für sich alles richtig aber das nächste mal ohne Handschuhe und der Handscheller ist eben so verboten :)
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
I well working tha jab to UAE
ua-cam.com/video/0HlgzSAwuW0/v-deo.html
.
ua-cam.com/video/0HlgzSAwuW0/v-deo.html