Yes! You would have to put on backing plate, install impeller, set clearance then disassemble and start installing seal. For a closed face impeller clearance might need to be checked while removing pump for maintenance, or checked with casing for new installation.
I have to ask just because i do this for a living to we don't use oil because the pump is for drinking water or to water food we use soap but i was told it is so you don't role the seal and chance a leak because the seal will garb the shaft and role.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
É muito bom e facio quando temos em mãos o planejamentos da tarefa e as ferramentas corretas isso deixa com uma probabilidade de acerto do serviço e confiabilidade
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
Improper handling & installation process of mech'l seal. Where are the extra cares needed in handling, reassembling, & installation? -proper positioning to its proper location is quite unclear. - the way he projects & carried out the installation is way out of professional, journeyman way. The way he tightened the stuffing box cover, may cause uneven contact(tilt) on matting surface of stationary & rotating sealing face.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
What about impeller clearance doesn’t that need to be set before seal is installed and locked down?
Daniel Keller sunil
Yes needs before seal installation check impeller clearance and shaft run out check etc..
Yes! You would have to put on backing plate, install impeller, set clearance then disassemble and start installing seal. For a closed face impeller clearance might need to be checked while removing pump for maintenance, or checked with casing for new installation.
Yea but he doesn’t need to if he is just leaving the imp and ob case off for the sake of the video
अच्छा कार्य है मै इस से भी आसान तरीका से असेंबल कर रहा हूं।
aap kaha se hai sir
mai bhi seal banata hu from mumbai
Hello from Atlanta tx
I was working as Mechanical seals technician. HiFab Mechanical seals Bombay.
What are you doing now?
Sir, Servicing Cooling tower.
@@sudarshanbolar6761 woooooow ... So you started your own? Like service of all Industrial cooling tower?... Could you give me your mail ID?
sudarshan@himgiricooling.com
I have to ask just because i do this for a living to we don't use oil because the pump is for drinking water or to water food we use soap but i was told it is so you don't role the seal and chance a leak because the seal will garb the shaft and role.
There is a chance to roll the o-ring in the seal while sliding it on the shaft or shaft sleeve, im guessing that is where you use soap.
You can use dishwashing liquid which will wash away.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
É muito bom e facio quando temos em mãos o planejamentos da tarefa e as ferramentas corretas isso deixa com uma probabilidade de acerto do serviço e confiabilidade
www.mechsealeng.com
Good job sir
You work way to ruff with that seal!!! And where is your Grease?!
He said it was for demonstration purposes
@@ghostdog662 well...bad demonstration then.
Is this pump from Sumit
The pump is the chemical process pump , ANSI B73.1M or others ?
Please kindly your advice, what kind mechanical seal face which suit using heating oil? Operating temp. Is up to 210 celcius
Honggo Aditya we have solutions for high temperature sealing. contact me if you are still interested.
Tungsten carbide or ceramic. Stay away from carbon seal faces for high temps.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
If we apply tenson of sleeve can O ring change postion?
Uma forma prática
Parabéns obrigada¡!
What do you clean the carbon face with before installing?
Because any small martial part on face seal is leaking needs to clean face?
Crc lectra clean is very good.
Thank you for this video I want your opinion in this pump
EL AJUSTE SIEMPRE EN CRUS POR QUE SINO DESBALANSEAS LA TAPA EL TOPE DEL SELLO TIENES QUE MEDIR EXACTO O TERMINARAS POR RONPER
Very informative.
How much is the loading . Free length and working length.
Please reply
Depends on the seals
Single spring?
Multi spring?
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
Good idea
Gracias en planta tengo 4 bombas similares de mucha ayuda
펌프 와 모터 사이 연결 최소 연결 길면 요동 심함 고장 높임
사람 팔 길게 펴다 A
사람 팔 짧게 펴다 B
어느것 편안
Thanks for demo
Very nice sir
wow so very good more video
Mill write Fitter ho kya bhai
@@rajuthakur9437 mai seal banata hu
thank you
waoo is the best job
Thainks
Nice and help full
very nice
Mill write fitter ho kya
good video
Excellent work
Mill write fitter hai kya aap
"Installation process"? Why isn't it just an "installation"?
Please subscrib chanel
ua-cam.com/channels/AV_AEWCJJVUSX41tstrY6Q.html
Super sir
Hey Peter, turn on channel nine...
Ha! Sounds just like it!
Kon si pump he
Very nice
I asked for a quote my name ste Gardner l think i stated that the shaft size was 1/516 it should have said 1/15/16.sorry for the mistake.
Very interesting
Thank you Sir.Jay Hind.
I like this job and I doing long know
good video I like
nice
Still a dynamic seal!! Spring will get chloride stress corrosion!! Rubber bellows will fail due to movement.
Who said rubber bellows? And what’s the alternative to a “dynamic” mechanical seal?
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
خیلی خوب
Boss pwede po ba akong makabili ng mechanical seal ng submersible pump
NICE
Like how he says oil
si no regulaste y ubicaste el impulsor primero ,todo esta mal-
Improper handling & installation process of mech'l seal.
Where are the extra cares needed in handling, reassembling, & installation?
-proper positioning to its proper location is quite unclear.
- the way he projects & carried out the installation is way out of professional, journeyman way.
The way he tightened the stuffing box cover, may cause uneven contact(tilt) on matting surface of stationary & rotating sealing face.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
goodstuff
thanks bhai
Vari information
So simple
Mill write fitter ho kya
Nyc
Fitter ho kya
Good
Please help me , I want to buy a house . So I want money.
Give me 1 lakh, i will give u 2 lakh
Love the video but you to ruff 😂😂🤦🏻♂️ Gaul Central
펌프 축 패킹 외부 에서 조립 용이 구조 일것
패킹 이 축 보다 먼저 마모 축이 마모 안 되게
그런제 축 마모 이 축 다시 가공
Do you need a bigger pump, take a look at our
simple
👌
amyzing
Pati bering
Hi
Confused
Good night
Hi I want to buy mechanical seals how can I get it
@@jamesokechukwu9024 we r manufacturing mechanical seal from mumbai.
Pls Tamil la venum
Plz explain Tamil
Tall me pls
nice
Good
👌
@@rajuthakur9437 yes
Kaha se hai
Mumbai
Salary kitni hai
20000