Why I HATE 4.10 Gears In My 450HP Supercharged New Edge Mustang GT..
Вставка
- Опубліковано 6 жов 2024
- My 450HP Vortech Supercharged New Edge Mustang GT has 4.10 Gears and it HORRIBLE! Absolutely NO TRACTION and it doesn't compliment the way I drive or how I want to setup my car! Hope you enjoy the video and make sure to have a wonderful rest of your day!
Follow Me on Instagram: / ears.pov
Current Mods:
2V Mustang GT - 450whp/450tq
Vortech V1 Ti-Trim Supercharger (2.87 Pulley)
CX Racing Intercooler
Trick Flow 75mm Throttle Body
BBK Cold Air Intake
BBK Long Tube Headers
LAR Catless X Pipe
Borla ATAK Catback Exhaust
Ford Performance 80lb Injectors
Walbro 255lph Fuel Pump
NGK Cooler Spark Plugs
OE Style Black Housing Headlights
Raxiom Smoked Fog Lights
Raxiom Sequential Tail Lights
Raxiom 3rd Brake Light
Mach 1 Shift Knob
Shorty Antenna
#NewEdge #MustangGT #Mustang
family friendly pg clean advertiser friendly
*There seems to be some confusion. My motor is NOT currently built! It is still a STOCK 4.6L 2V motor. I said in my last video that I will be building the motor in the next 2 months and increasing the redline to 7K with the use of heads, cams, ect.*
Okay well you weren't making 450hp at the time of this video, those stock 2v max out about 350rwhp with a supercharger because of the cams and heads. We figured out 20 years ago that putting money into a 2v is a waste of time.
Gears
Stall converter for high hp 3.23 or 373 for over all
Don’t change the gears cause once you get cams and headwork you’ll rev way higher and go back to 4.10’s, don’t fear the gear!
We shall see!
Im currently doing research lol I have a kenne bell GT with 4.10s and I absolutely love it. I have some sumitomo all seasons that hook surprisingly well even in first gear. I have cams and longtubes I haven’t installed yet but I think I’m gonna wait until I get a built short block with some trickflow heads. I’ve taken down a few scat packs a couple of 10spd auto stangs and a couple of turbo mk4 golfs. I really don’t mind the rpm and gas mileage when cruising and I absolutely love the wow factor when giving friends a ride. Point is I was thinking about moving to a 3.55 or 3.73. I think I’m gonna stick to the 4.10 for now
@@branleesan stick with whatchu got for now but I would consider dropping to possible 3.73’s IF you do cams and heads.
Absolutely. 100%
@@EarsXBLdamn I’m late but ur into cars gahdamn thought u would’ve j been some out of line gamer kid😊
3.73’s IMO best compromise for street/strip - I have them in my 500 hp 99 cobra and they work great - tire is key as others have noted as well
Agreed! 👍
Went 3.73 with my build hoping car makes 500hp before boost any ideas on suspension and tire set up for an 01 crown vic p71??
I agree with you on this one..3.55’s are probably one of the reasons terminators are such a roll racing legend..The people here saying that 4.10 boosted is better aren’t taking all variables and scenarios into consideration…even with cams and higher redline you will still be better off with 3.55 or 3.73 for well rounded performance..
Coyotes love 3.15’s, stays at peak boost and he gone
That’s what I’m saying bro 😂 I’m not building a 60ft car!
Yep. 3.55 and under for boost 3.73+ for NA.
I had a cammed 2004 4.6 with 4.10s and absolutely loved it! I've also maxed the dash easily on the intersate.
Very sound advice! I have a 2003 Mach 1 with 530HP and I'm putting in a Strange 9 inch with 3:25 gears this winter and switching out the 3:55. To get any sort of traction a smaller gear is needed. I pressed the red button. Great Channel!!!
Thanks bro! 🙌
I had a manual '99 GT with 4.10 gears CAI, and exhaust and I loved it.
1-2 @ 29 mph
2-3 @ 57 mph
3-4 @ 90 mph
4-5@ 120 mph
The biggest downside of the 4.10 was that even though they pulled like crazy, my 0-60 time got hurt with that 57 mph shift from 2-3.
3.73 gears in my NA 98 Cobra with bolt ons, tune, and NITTO 555 G2 315/35/17s out back. No traction issues and I can still reach 145 mph. The only negative is the drone out of my SLP Loudmouth IIs. Gas mileage is easily 20-25 mpg hwy.
Loudmouth 1's would make you appreciate the 2's lol
4.10 gears are good if your not going to add forced induction.....
4.10s are great for a built acceleration car with good suspension, wheels and tires. Otherwise I prefer 3.55-3.73 for a nice balance of acceleration at low speeds and pulling on highways.
I got same car rev to 6200 4.10 gears and I can do about 130mph 4th with a 26.4” tire From dig it hooks You need suspension and a good tire
Right as you are, youre wasting your breath bro. Tried to tell this man from bout 20 years of 1st hand experiences.🙃😂
@@kingb75126 what set up of tires and suspension would you recommend for a 2001 crown vic p71? I'm fully building the engine this year. With a t76 style turbo and looking to improve what it can actually put down to the ground!!
@@kingb75126 also doing t56 mag swap in it. Check my page out for the build sheet in my shorts!!
He can also run a bigger pulley and stop knocking the tires off.can tell hes not a mechanic or he wouldn't be afraid to drive it.late for grandmas house lol
Came over from the gaming channel didn’t know you were into cars got ya self another sub!
I agree with you. My 97 cobra is super annoying to daily drive with 4.10’s. My gas mileage sucks and I’m shifting into 3rd by the end of the intersection for normal driving, and on the highway at 80, it’s like 3k rpm! I’m going back to stock 3.27’s. Good call!
I am at just under 100 mph at 3k with 3.73s in my 98 Cobra. Big difference for sure.
i wouldnt buy a V8 for gas mileage
Anyone buying any muscle car with gears for mileage is an idiot.
I run 4.11 gears in my Camaro for the past 41 years. 632 big block chevy, t400 trans with trans brake and 3800 convertor. Tires are 28x12x15 cheater slicks.and i do run it on the street.
I've had 410's in my mach1 for about 15 years now in my auto and I have 0 regrets lol.
I'm at 680whp I have 4.10s it's not about the HP it's also tire size and transmission ratios. I'm also still doing 80mph at 2k rpm. The rule of thumb is you should be able to hit your 1/4 mile trap speed in your 1:1 gear.
What vehicle do you have? What transmission?
@@LeadFootRebel '13 GT500 and the TR6060
Ive got a 99 cobra..love my 4.10s. Gaa miliage. Sucked till I got a tremec too 500 with .50 overdrive...i take off in 2nd...1st is only for stoplights...2 valves don't rev...i shift at 7500..my engine will pull so 8k...the problem isn't the 4.10s its your no flowing heads
I suspected that 4.10 gears would cause traction issues with a boosted car. Good info. Thanks.
You bet
Have a 69 Fastback, used to have a 65 coupe with 3.55. Really liked that one. The 69 has a 2.79 I plan to change out to the 3.55 like my coupe behind a sniper Holley’ed 302 rebuilt original motor. Thanks for the tips always wondered the difference.
I went from 3.31 to 3.73 just for that reason lol I’m going to shoot for about 450hp but they shut our track down so it’s all street now. Plus I’m getting older and blowing the tires off all the time isn’t really my thing anymore 😂
3.73 will work perfect for 450whp
Truthfully it’s hard to get anything more than 4 or 500hp to work on the road lol I’ve been working on my suspension first and honestly I’m happy I have :)
I recommend 3.55 and no higher than 3.73. I enjoy doing pulls well over 100mph and that drag from 4.10’s is absolutely horrendous.
I just found your channel man I recently got another black 03 gt 5 speed and have been looking for content and turns out I heard you say something about Illinois I’m also in IL down south closer to stl, also think we both have the attacks so you earned a sub love the build and the vibe keep it up 🤙🏽💯
Just finished the vid we have the exact same setup as far as exhaust 🤙🏽🤙🏽💪🏽
Mine has the 3.73’s and I wanted the 410’s but I am glad that I got one with something in between in case down the line I boost it.
Can't agree my 900hp Shelby was 3.73 and it was there perfect street car that I could daily. Your issue is a suspension issue these cars have aged so you need to upgrade parts so you can stop the spinning the tires at 450wheel
You’re comparing 2 completely different cars with different gear ratios and transmissions tho
@@EarsXBL I also got new edge buddies making similar power on 3.73 and it's perfect for street and highway driving. 355 gears don't give hi5 don't low but has a decent up top power band
@@EarsXBL he is correct. Got to get suspension work down with a blower for sure plus .3.73 gears are a perfect gear for that set up.
At 3:10 rare white dodge stealth spotted on the right
aka a Mitsubishi 3000gt
4.10 in my automatic 2002 mustang gt were horrible. I ended up going with 3.73s. Way better
Does anybody know what gears come in the v6 mustangs?
I installed 4.10's then two days later I took the out. Didn't feel right. Felt like it slowed the car down especially at high rpms 03 Whipple cobra
i think u need to be tuned?
Yeah 450hp on what I assume is a stock bottom end 2v and people are saying rev it out higher to compensate? Lol I mean if you want your rods to start crip walking be my guest.
People thought the motor in the car currently is built lol
It's more about the torque than the HP. Keep it to 450rwtq with a good tune. There are stock 2v with boost and cams that make 500rwhp, get revved to 6500, and last for years.
Man I cant believe you are really crying over 4.10 gears on a 450whp car w/ no tire? You dont need a damn drag pack! You just need a GOOD TIRE. Smh c'mon man. Not well rounded? I have 3 Mustangs LOWEST power car theyre on is 460whp... And have a 4.10 in them each.😂
RAISE YOUR REDLINE IF YOUR MOTOR IS BUILT.
Agreed man this mustangs love 4.10s. Add some cams and raise the redline get a good 130 in 4th
Even faster with a taller tire
@@luisuribe5432 so many variables here. Taller tire, better compound, better suspension setup, higher rpm... Hes talking about rpm but the 4.6 will indeed run boosted to 6.5-7k w/ no issues as it only sees that higher rpm for a brief second vs being sustained. And then gas mileage, car will easily do 16-17 mpg city and 24-25 ish mpg highway, staying out of boost.... Considering stock is 17mpg city and 27 mpg highway... Really not much of a difference. Like 25 miles a tank difference...
Hate to say it, but the car will be a dog w/ a longer gear and this minimal power. I hope he at least decides to stick w/ a 3.73.
@@kingb75126 yeah man I agree, you know your 4.6’s
Dude you are comparing a GT500 w/ a completely different motor and trans to a 4.6L 2V. We don’t have no where near the same redline STOCK and a trans that works completely different. 750whp w/ 4.10 gears on a New Edge for the street? That doesn’t make any sense.
also dont forget, tire diameter makes a big difference too.
All the difference!
Plz research air bags rear suspension for drags an tire hooking thunk only need one on side that spin most an once correct Micky Thompson Street slicks will tote front tires off ground
Bags? I’ve never heard anyone drag racing with them 🤔
hes hating the 4.10s while im going with 4.56's lol but my car is basically just a drag car
What super charger is safe with my stock bottom end short block on my 2001 cobra… I want to charge it but I don’t want to blow the engine and i here mixed reviews on how much power they can take safely
Bro got a pair if racing tires hit me up if you want them.
I had both sets of gears to much shifting not friend ly
This y u need cams bro raise it up a bit
Oh I know! 😂 It’s getting some Todd Warren Cams soon!
4.10's are awesome in a manual. Hard pulling always.
Trimic 5 speed or 6 speed way to go my brother.....trimic transmissions are best for high hp cars n are really big name in stang world
Yup! Going to be putting in a built trans w/ the new motor setup!
You need a better brake setup if you haven't done it already.
Rear gears an stall converters lol ....u need a stall converter an not a 410s..a 3500 stall will get ya up to speed ...if u allready have lotsa hp
. If ur running 275 to 350 ..hp run gears.. u want stalls for high hp or cammed
My car is manual
My 02 gt has a built motor, 2.1 KB-- I put 3.90 gears in with a TKO 600 trans w/ 0.64 overdrive.. To me, it's the perfect street setup. You get low-end punch plus topspeed pulls. I've hit 165 mph easily.. Crusing at 75 mph, 1800 rpm..
I was thinking about getting 410s on mine ngl … what’s wrong the best to go with
Go 4.10s you wont regret it
If ears had a higher rpm like 7000, the extra rpm would make up for the lost mph and im pretty sure ears wouldn’t have been bothered with the gears
@@luisuribe5432 exactly.
Boosted 3.55 N/A 4.10 gears. No point going higher imo
@@EarsXBL 3.73 all around.
Depends on your lifestyle
4.10 373's are for the track.
I switched from 4.10’s to 3.55’s best decision ever in my opinion..
Yup.
4.10s aren’t that bad. Yeah the drone is a bit annoying but makes up for it how fast it goes from 40 mph to 90. But yeah after 100 mph it starts running out of breath. Fastest I’ve done was 145 mph in 5th gear.
Yes if you want to go slower...
Just curious, why? Seems like that would only be good for the highway and top speed. Seems like 4.10 would be much better for fun street driving, where top speed doesn't matter.
miss the frs already
It aint gone yet 😂
Why do you have your flash tuner plugged in? I have basically the same car with slightly more horsepower. I have no after market gauges though..
monitor temps
Mine hits rev limiter @105MPH in 3rd
Were you still in Chicago or Houston because you have no inspection sticker
This was Houston at this time!
how are they NA
Worked perfectly fine!
I currently have a have 3.27 gears. I plan on boosting my tc. Should I just stick with my original gears ⚙️ 🤔?
Yes!!! At the most go up to 3.73, but I don’t recommend anything higher than 3.55. Would you start adding serious horsepower you would think the higher gear ratio would help you, but often times it’s the exact opposite.
@onlyfacts3502 yes but I don't have a mustang I have a lincoln town car. Longer wheel base
What state do you live in? Curiosity
I bought a 2001 mustang gt it came with a vortec v2 supercharger and it also has the 4:10 gears. I’ve owned the car for 2 weeks but I still haven’t figured out the sweet spot on my mustang at what speed does boost kick in? Does the car want to get redlined in first gear?
Oh and I just learned how to drive manual on it lol
Boost and rpm go together not speed/mph. You should start building boost around 2500-3000rpm.
If your first gear is spinning at all then I would not recommend redline. Same thing if you're switching into 2nd and getting wheelspin, shifting early in 1st could limit the torque spiking. High RPM powershifting is fun af in these cars though.
Even with super charger how you get 450 outta 2 v
He has a v trim with a 2.95 pulley running about 15 lbs of boost no problem and thats on low end.
It’s not hard just need a good tune
Do 3.73 gears
“The way I drive” LOL gayyyy
Change your pulley , quit whining and get a 5 speed lol
His is a manual.
I have a boosted 95 with 4.10’s and daily drive it and couldn’t be happier with them. My last dyno was with the stock 2.73’s and it put down 440whp. I’m also on a 315 Mickey Thompson street et. Street tires on this setup would not be fun.
How many miles on your 95? I’m thinking about buying one with a built 302. I don’t know how many miles on the engine since it’s built but it’s 210 on body atleast
@@dedricklatimer4173 I’m just over 70k
He basicly should be driving a preus.what do you have a mustang for if your not driving it lol hey your moms calling go home.
Also, who's building your engine?
Did u get the speedo corrected for the 4.10 gears?
Yes I did! I have 3.55 going on in a week or so.