Bicycle Parts - springer fork, steering tube, and headset installation.
Вставка
- Опубліковано 25 сер 2024
- Installing a bicycle springer fork, steering tube, and headset. In this video we are using a 26" bent springer fork with a 22.2mm headset. Here are the part numbers used:
513005 26" chrome bent springer fork. steering tube 7 1/2"" long from the top to the bottom bearing race, 4" of threading at the top.
503008 chrome 22.2mm headset with bearings
The same process is used for installing any size springer fork onto a bicycle frame head tube.
This video leaves out so much information and so many necessary steps, it should be flagged as "inappropriate." I hope no kids build a bike like this after watching you.
Yes sir it will probably end up hurting them
"Screws on nicely" * *assistant tries to cross thread it* *
You beat me to it by two years! :-D
I came down here looking for a similar comment , I was not disappointed
Cross threading OR
Rethreading 🧐
Thanks for the video, I already spotted something I did wrong on putting my front end on an old Schwinn. 🤙🏻
No grease ! now that makes for a good build !!!
There you have it. How NOT to install a fork.
so explain the correct way in lieu of cryptic postings
@@beepbopboop1303 The correct way is to just use common sense. Something that this video didn't mention or display.
Thanks bro i was wondering which way the barings where facing
Is everything really “out of stock” on your website? I wish I could do some shopping
1,000th like! Sweetness! Good video btw, to the point and informative.
I noticed after the nut was put on the fork ring is crooked with space above and below it after nut has been tightened... probably have to cut the tube at a certain point during process...
shouldn't that spring ring be level on the shaft with the correct washers? that is so crooked, it's gonna flatten the shaft threads over time and ruin it. Plus no bearing grease? this is the white boy install. haha
Plus he didn't tighten up the lock washer. Perhaps it's the real quick fix installation.
Evil b sure thing 100% correct
This is UA-cam quality 11 years ago whaddya expect
How could you cross thread something that much? Also...Where is the crown race? Where is the grease? Did the fork blow apart after the first bump?
can you do a video on how to install Lowrider Bike Low Down Crown Fork Extender and what the difference is between that and a standard crown set up? thanks
wont that spring ring Mess up the threading without a cap
Where did you buy that springer? I've never seen one with the bottom bearing race already installed.
You should require a signed release disclosure, before someone views this video. Using your advice will eventually get someone hurt. The lock ring was not installed correctly, defying the purpose of it. No grease assembly. The top spring bracket chattering on machined head tube threads is an accident waiting to happen, not to mention destroying parts. Moderator should be more thorough when screening clips.
How do o buy a right springer frok. I want put one to a bmx
Go ahead, Go ahead, Go ahead, Go ahead, Go ahead,
Very helpfull 👌🏽
Will it fit a Men's Kent 2600 cruiser bike
It needs to be snug and tight, you will get it
Thanks for the video.......
My gooseneck bar is to small and dont stick out the top is there any advice you can give me id really appreciate it. Great video by the way very informative thanks again
What I wanted to see. The format of the design 👍
I have a very plain Jane Huffy beach cruiser from Walmart. I've been thinking of customizing this bike into a rat rod bicycle. This maybe a dummy question but are these forks Universal for any beach cruiser? Or are there certain measurments I need to know about?
Good question, I'm wondering the same thing
cool you have the same bike brame now question were do you get the bearing races for the top and bottom the flared our parts I have a tripple tree fork that i'm installing and I have not bearing races or bearings and its not a threaded tube like that one do you have any ideas thank.s
are beach cruiser steerer tubes 1" always? Can a shock fork for mountain bike be used or is the springer fork the only option for shock?
I bought one like this but how do u put the handle bars back do i need someother type of piece cuz the screw to the handle bar doesnt go into the fork like theres no hole for it to go into ?
No grease/lube on those bearings huh? ;) Are you *really* a mechanic??
Adghjklpoi
I just bought a 20” bent springer fork for my Worksman tricycle. I went to install and would not fit correctly. The headset measures 6 1/4”. When I go to install the fork ring, it isn’t able to raise up high enough to be able to slide onto the steering tube! It’s seems like the base of the steering tube is too high up on the forks. Any suggestions would be greatly appreciated! I am a “noob” as my kids would call me, and I’m just trying to get some pointers to what I’m doing wrong. Thanks in advance.
Does the springer fork have a bearing race on the bottom? If so did it come with it? Mine didnt come with one i dont think
did you guys forget to grease your threads and bearing for the headset or just not do it for the sake of time and instruction?
at 0:17, what kind of bearing is that called? I am trying to look for a replacement bearing for my headset and need something like that.
@reptilezs saw it off.. i did putting a 26'' fork on a 24 bike frame
dont saw too much tho
im putting a 20 in for on a 16 inch schwinn and even tho its a bigger fork it still doesnt fit on the frame.. the threaded tube is to short to get the last bolt on.. any suggestions????
bro can i use a regular size 20 banana bike to build a lowrider or do I need a slightly longer bike to make it????
how do the handle bars attach like what holds it all together im lost
im converting a kids 16 inch specialized hotrock bike frame into a lowrider and wondering if you can help me figure the size steering tube i need, the headtube is 80mm and the head tube angle is 70 degrees . if you can help me it will greatly appriciated this is my first build . thanks
how many times are you going to thread the shaft. jeeze!
keep your day job guys
Your springer bracket is not on right -it's crooked I,ve been building bike for over 10 years.. Jesik bikes
How do u stop the spring action fork from squeaking
Richard Reyes wd40
Nice n snug
Why does your assistant seem so passive aggressive in his movements lol
Craziest parts I ever ordered came from bicycle designers, 5 out 5 parts I ordered were a huge disappointment, their customer service is far worse
I follow this, but my for is a nit loose... any ideas?
Do you need to use a spacer tube for some bikes, for the top of the steering tube? Do you trim the top and leave the ring crooked? Where do you get the bearings, does it come with the forks? Does it come with all the metal dohickies, or do you purchase them separately?
Take a look on Amazon buddy top lowrider has anything u need. I personally could not find a spacer tube it's just too short on other bikes. Take a look at my comments I explain how to pull it off.
Well at least he got the fork on the front of the bike. It kind of went downhill after that.
Orale ese like all the dop Lowrider. Bike's. In the e videos im working on my schwinn beach cruiser bike
what happens when you adjust the spring fork for the spring itself
My fork ring won't come off my steering tube. The only way I see is to take the spring off but there seems to be an easier way. Anyone know?
Does shine know how to install a siren for one of these. Do I Need a battery
Is thT a 20" frame on a 26" bent springer fork?
questions wear you guys located I wood like to buy some 26" fenders for my Schwinn beach cruiser lowrider bike tanks great videos
LOOKING FOR A FORK LIKE THIS ONE FOR AN 27.5 CRUISER BICYCLE ANY LINK TO BUY IT ?
20% tutorial
70% turning
I found it odd that you make the video yet don't answer potential customers questions (I already buy from you). Granted it isn't rocket science and these are just bicycles which require very little in the way of mechanical skills but we live in a time where even a lot of men don't know what a tool box is for so it is probably in your interest to spoon feed information rather than just giving the order of assembly.
Como puedo contactarlos
hey can you tight the spring or loosen it?
Saludos chiapas,México, deseo obtener esta tijera
Come on ' this does not look right ' it's crooked
it's loose looking, pieces missing ,the threads on the goose neck will get ruined in no time , what the ??
I have a huffy cranbrook anyone know if this will work for it if so will it look nice? I’m new to this and I like the bike but I want to customize it so it looks better
is that for real? Are you serious? was this a joke?
lol wheres the grease?
Did i miss where you packed the bearings with grease?
No he be stupid af
hey whats the width of the springer fork
That poor guy doing the work seemed scared as hell to do something wrong and literally walked backwards trying desperately not to make a mistake. you must be extremely mean and his job security just barely there. Take better care of the man doing the work . Sad the attention was drawn to him rather then what I came here for which is research on the classic springer fork.
I'll never understand why Springer fork is better than girder.. Someone can explain me?
itu nama cat nya warna ap
you mean 80% turning?
Can the angle of the fork be adjusted if I wanted it to look more stretched?
Get an extended crown
I guess "Bicycledesigner" doen't mean bicycle mechanic.
Bitchin' chrome fram though. Those for sale here or somewhere?
How do i get the metal ring the bottom bearings sit on. First ring on steering tube before bearings.
I think you’re talking about the racing crown. You can get them off eBay just make sure it’s the right size
@@aayandres22 i did more research. It was the crown race. I found the part i was looking for. It was also a different size for spring forks. My new hobby is building lowriders or any bike really. So any tips i will appreciate. Thanks
Pode mandar um fork low ,para testar 26"
Y do I have an extra piece
haces envíos a México?
Does it come with all the bearings or do I purchase them separately
I know this was 4 years ago. But for those with the same question,
You buy the bearings separately. Or use the ones on your bike if you are just changing the fork.
not bad
Its bad setup because after a few turns riding your bike the lower ring that secure the ballbearings will become lose wich will result that you probly will loose your lower ballbearings..
Bruh there's hella chrome in this video
Price???
they forgot to grease the bearings!!!!!!!
for a 20 inch frame..does a 21.1mm neck fit? or 22.2mm? anyone help thanks
Compton ChuckZ 20 inch bent forks 💯
Rad video! I'm trying to remove a steering tube from a bike with a similar design and it just isn't working out. The bike is pretty well rusted, but I don't think it's THAT rusted. Any pointers?
Just gotta keep working it... Maybe spray lubricant... l had the same problem with mine, l just kept working it until it popped out... l threw that fckr out and bought authentic 1960's hardware... For me it's the only way to go.!
3:28 that looks like fuck'n garbage
Fuck up the threads, k go ahead.
Put grease on those bearings! A Crescent Wrench?!! Get the correct size box end wrench, rookie!
fica quase o vídeo todo apertando porcas e não mostra a frente montada....
I really like how you messed up the threads putting on the dust cover. Come on now since when do you just start fisting the damn thing trying to crank it on? That is why you couldn't get the lockring on very easy. Not sure who you are but def don't want you building anything I paid for...
didn't see any grease ...
ALFRED PAPO Get some glasses. I see grease, not much, probably just a light coating as provided by the manufacturer.
That said, they struggled to start the nuts (poorly machined thread or plating), and they didn't finish the job properly.
You must have only watched 90% of the video...
all over his hands lol
are you guys for real?
Yes they are I ordered parts my my lowrider bike project
Also they didn't tighten it down enough in this video the top part needs to be completely flush with the frame with no gap. These dudes are idiots also being way to rough with the chrome I'd be freaking out. Lol
What a f-'n train wreck of an install. As mentioned below, this is how you DONT install them.
Four and a half minutes of WTF.
steer tube too long
This is screw up.
Ha, you will never build a bike for me.... lmao!
bro I'm 15 and I build bikes and I'm smarter than this guy wtf.
Saame
not the right way do not do it this way!you will fuck up your shaft thread
Noooooooo ..... That top part looks like shit can't be right .... No rubber or nutin lol dono just looks bad..
Ha-Ha these people are a joke. Look how it's all crooked 😅 I build lowriders & that's not what you do.
Shit.. that looks wrong and messy!