VW Passat B7 Rear Camera Installation Guide

Поділитися
Вставка

КОМЕНТАРІ •

  • @autochava
    @autochava Рік тому +2

    Great Job , Respect for Information ❤️
    Good luck from Georgia 🇬🇪🤙

  • @Xeivier86
    @Xeivier86 7 місяців тому

    Gracias por su gran dedicación y bondad, para compartir esta gran información 💪

  • @TudorGruian
    @TudorGruian 2 роки тому +2

    No one did a tutorial like this before. Much appreciated!
    Also looking in doing this on my B7 (but i'm gonna use a CVBS). I see that you powered the camera from RNS's connector, others added a fuse and got the power wires transfered on the left side of the car. I don't know what approach should I make with this

    • @fikovele
      @fikovele  2 роки тому

      Thanx. With CVBS might be complicated since it requires fuses and some converters if you are connecting it with RNS 315. I know it might be cheaper but also original VW used parts are not bad. Then you can directly connect everything. Laying can be done on both sides, since my control unit (for HIgh feature) is on the right side I chose that one.

    • @lesonu
      @lesonu Рік тому

      @@fikovele vc sabe me dizer quais as ligações do positivo e da câmera no rns 315

  • @FlamingClips
    @FlamingClips 2 роки тому

    Will this work on any Passat from 2012, 2013 and 2014 (those are the ones I'm looking into buying)?

    • @fikovele
      @fikovele  2 роки тому +1

      it should be, assuming you are using the same (genuine) VW parts, since the laying itself is the same for all models. B7 is 2010-2015.

  • @pifandrei5743
    @pifandrei5743 Рік тому

    Hi . Is this a solution for the stock stereo that's coming with the car? Or is that an aftermarket one?

    • @fikovele
      @fikovele  Рік тому

      Hi i have installed rns315 prior this, stereo will not Help you here

  • @FallsGaming
    @FallsGaming Рік тому

    where can i get an Origional Rversing camera for my 2011 Passat Highline? i keep finding similar ones but the don't have the same cables.

    • @fikovele
      @fikovele  Рік тому

      I got mine on ebay, but there is plenty of same or similar, mine camera itself is from t5 VW van.

  • @turbo_toni
    @turbo_toni 2 роки тому

    I'm currently trying, but I can't find a way to get the wire from the head lining into the tailgate... Help!

    • @fikovele
      @fikovele  2 роки тому

      that is the most difficult part actually but you will make it !

  • @yemiu101
    @yemiu101 4 місяці тому

    Hey mate, I have the original head unit, I was told I can’t retrofit a non VW reverse camera. Would this be possible ? And what would I need please ?

    • @fikovele
      @fikovele  3 місяці тому

      Hi man, you heard correctly. Even sometimes vendors write compatible with OEM parts it's bullshit, you might use some android version of the display then connect camera. Often they come with RGB connector . Try getting OEM camera or simply switch to Android unit and then use whatever is available.

  • @lukaszknebel-od2mq
    @lukaszknebel-od2mq Рік тому

    Hallo, ich wollte mich verbinden. Eine Kamera für das Radio RNS 315 wo ich ein Kabel kaufen kann und eine Kamera nur die werde ich auf VW 5 plus stecken. Und wenn es eine niedrige Version geben wird, brauchen Sie ein Modul???

    • @fikovele
      @fikovele  Рік тому

      Hi, für Golf geht auch, ist ähnlich. Aber welches Modul ? Für Hi-Cam (zeigt Linien auf Display wenn man biegt mit dem Lenkrad) du brauchst ein Modul. Man braucht nur RNS315, wenn die im Golf passt ist gut. Auch muss aufpassen ob Kamera im Gepäck-Griff passt

  • @vallorahn
    @vallorahn Рік тому

    Yeah, if the flip camera cannot be installed, I will go with aftermarket Android display with canbus connection and indoor camera that sits on the path of washer fluid and wiper. This way snow will not get in my way.

    • @fikovele
      @fikovele  Рік тому

      my friend did that and was happy, the display even had more features, similar to the phone. he installed it just below the plates, resolution was not great but ok. i think he paid less than 100 Euros for everything

  • @turbo_toni
    @turbo_toni 2 роки тому

    How did you take the grommets off the tailgate hinge!

    • @fikovele
      @fikovele  2 роки тому

      I used the screwdriver to make it loose a bit and the carpet knife to expand the hole. Then with the hard wire i went trough with camera wire attached (taped) to it. Other part of the camera wire was from the other side then taped back together. But the rubber part , duct, cannot be removed therefore I had to use the brute force to go trough it

    • @turbo_toni
      @turbo_toni 2 роки тому

      @@fikovele I've been trying but that grommet won't budge! Also, there seems to be a hard plastic shell (and a second metal panel) behind it. I can't get my hand in to push from the other side. I wish you had video'd that part! The rest I can manage!

    • @fikovele
      @fikovele  2 роки тому

      @@turbo_toni first de-attache the ribbed rubber cable duct using the screwdriver and some pincers from the slot as I did, you will see the cables inside. now they lead through the carbody via that metallic hole. Now use some hard wire to lead trough and that is the most difficult part to me, since you have to push hard making sure it does not bend. But the plastic plates you have to remove (rear part of the ceiling, backseat area) inside the car just imagine it is hidden below it. Try to identify the current cables where they enter and where they exit. Your hard wire should go in parallel. I don't know what is the metal panel you have there

  • @troyboy2027
    @troyboy2027 11 місяців тому

    Anything different when installing on a American b7 Passat?

    • @fikovele
      @fikovele  11 місяців тому

      This I cannot tell, but I guess should be similar at least,, maybe some elements are on opposite sides. E.g cable could go along the drivers side

  • @jokerfleckcast3196
    @jokerfleckcast3196 Рік тому +1

    Passat b7 boot plastic is an absolute ball ache to remove. Already did once to fix rear washer pipe, never again

    • @fikovele
      @fikovele  Рік тому +1

      So true bro, pity they're making it so complicated lately, just to make our times harder... Plus the parts will break for no good reason so you cannot put it back together

  • @steveridesmtb
    @steveridesmtb Рік тому

    Dachte immer man braucht einen Adapter? Du hast den gelben von der Kamera direkt auf Can H gepinnt?

    • @fikovele
      @fikovele  Рік тому

      hab alles direkt verbunden, bisschen mit zinndreht dazu und zinnlot, hat funktioniert. glaube man könnte mit einem adapter aber keine ahnung welche (quadlock o.ä.)

    • @steveridesmtb
      @steveridesmtb Рік тому

      @@fikovele ok, also Video auf 9 und + auf 15, direkt in den Stecker und ohne Kamera Converter oder Adapter. Klar, mit Converter müsste man nicht Löten

  • @Luizcarlos_Alencar
    @Luizcarlos_Alencar 11 місяців тому

    Good morning my friend,
    I have a radio like this RNS315, I bought the reverse camera kit, and I'm having trouble installing it, could you help me?
    I already unlocked it via VCDS

    • @fikovele
      @fikovele  11 місяців тому +1

      Hi man, so is the same camera as in the video or some other type?

    • @Luizcarlos_Alencar
      @Luizcarlos_Alencar 11 місяців тому

      @@fikovele Tranks for the feedback, another type.
      Do you have an email or whatsapp so we can talk better about it?
      I bought a camera with RGB output, and I bought a CBVS to RGBS converter

    • @fikovele
      @fikovele  11 місяців тому +1

      Can you check this video: ua-cam.com/video/NZKnNsKYP-s/v-deo.html

    • @fikovele
      @fikovele  11 місяців тому +1

      Aftermarket cameras are not easy to connect because of various incompatibilities. If you use such camera then android interface or display is more better solution.

    • @Luizcarlos_Alencar
      @Luizcarlos_Alencar 11 місяців тому

      @@fikovele in case the camera I bought is not the OEM type

  • @titantill7049
    @titantill7049 6 місяців тому

    Weißt du ob das mit dem RNS 510 auch funktioniert? Sieht nämlich ziemlich verlockend aus.

    • @fikovele
      @fikovele  6 місяців тому +1

      Ist ähnlich, rns 510 passt aber ist auch 150e mehr teuer. Leider VW macht alles kompliziert um so eine Nachrüstung durchzuführen ohne VW Werkstätten, die Plastik Teile sind auch schwach leicht zu brechen . Aber auf jedem Fall machbar

    • @titantill7049
      @titantill7049 6 місяців тому +1

      Ok, danke für die schnelle Antwort! 👍

  • @niewymyslilem
    @niewymyslilem Рік тому

    Will it work with rns 310?

    • @fikovele
      @fikovele  Рік тому

      Normally 310 uses DVD for the navigation to run. I think no other major difference to 315. I guess it should

  • @mirsad1583
    @mirsad1583 2 місяці тому

    Hi ich ich habe ein RNS510 eingebaut und die Kamera wird garnicht erkannt bzw das Symbol gib es garnicht wenn ich den Rückwärtsgang einlege über vcd wurde bereits die Kamera aktiviert weißt jemand was noch sein kann

    • @fikovele
      @fikovele  2 місяці тому

      Wurde Kamera bereits mit 315 installiert? Hast du nur auf 510 gewechselt?

    • @mirsad1583
      @mirsad1583 2 місяці тому +1

      Hi Problem gelöst. Ich hatte davor auch ein RNS510 drin ich musste nur per VCDS Rear Kamera aktivieren und auch Low Kamera wenn nur eins von beiden aktiviert ist funktioniert das nicht finde ich komisch aber egal es läuft wieder 😂

    • @fikovele
      @fikovele  2 місяці тому

      @@mirsad1583 gut zu wissen, vlt hilft jmd weiteren

  • @amilcargallardo5366
    @amilcargallardo5366 Рік тому +1

    para una amarok ase

  • @turbot1826
    @turbot1826 Рік тому

    Can you uploade the instructions in german please.

    • @fikovele
      @fikovele  Рік тому

      Hi, kannst Untertitel ändern und auf deutsch setzen, glaube sollte funktionieren

  • @adnanalo7450
    @adnanalo7450 Рік тому

    🤣🤣🤣🤣🤣🤣🤣 🤣 So viel Arbeit wegen Rückfahrkamera bist nicht normal hahah

  • @blmagic2563
    @blmagic2563 6 місяців тому

    LOL serious sparky tape on wiring tsk. Heat shrink

    • @fikovele
      @fikovele  6 місяців тому

      Later I did rewiring with proper connectors, but that's not in the video 😅