Behringer Flow 8 - Connecting BlueTooth for Control & Audio Playback
Вставка
- Опубліковано 28 лип 2024
- The Behringer Flow 8 is an 8 input BlueTooth controlled audio mixer. I'm actually really excited about this little mixer. This video is an overview of the Behringer Flow 8. I'll be diving into more tutorials on this over the next few weeks, so keep an eye out for those videos!
Become a member and help support me and my channel: / drewbrashler
Find more resources and downloads at www.drewbrashler.com.
Chapters:
00:00 Intro
00:16 How to connect for Flow 8 BlueTooth Control
01:01 How to Change the Name of the Behringer Flow 8
01:47 Connecting phone to Behringer Flow 8 for audio playback
02:58 Conclusion
Products shown in this video:
Behringer Flow 8: imp.i114863.net/6bvnYq
Thanks for shading light on the Flow 8! When I bought the Behringer Flow 8 about a year back, I was unable to find a good tutorial/demo overview of the mixer, except a handful. This was much overdue, since to me seem like the system has got great potential but due to lack of information, was not able to capture the attention of all. Really would like to have more tutorials on this, including basic and advanced setup using the mixer. Thanks once again!
Thank you so much making these succinct and informative videos on the Flow 8 - much needed. Looking forward to further content which I'm sure will be useful. Step by step ways of using the routing to provide a musician with a click track and backing track in addition to sending a mix out would be much appreciated. Again thank you. 👍
3:40 I love tips and trips. Trip or tweet.
Amazing way tu use explain all the steps! - (( Thanks! )) .-
Can you make Bluetooth audio play through the monitors but not the main out? My band would like to use this to use in-ear backing/click tracks but Don’t won’t them played out to the audience.
Hello, thank you for the video. Can you tell me what the Bluetooth range is?
A great video would be to set up for a live music band to stream using a streaming app on the same device.
Hey Drew, I would like you to consider giving lessons for beginners on the X32 Behringer if you could, I would be one of your students
how you play backing track and separate L(mono backing tack) and Right ( click track). can you route it going to main output? or you need to route it to monitor. i want my guitar and backing track go to the main output while my click track can be heard only in my ear monitor connected to headphone/monitor out
Does the bluetooth option allow for phone interviews to be recorded without the caller hearing themselves ack down the phoneline? Some of the other Bluetooth mixers offer this option.
Hello Drew I'm your biggest fan from Nigeria, so question is how possible can the behringer x32 be connected to another x32/wing and have independent gain level. I'll love this to be answered
Can I use the flow as a stage box for an MR-18
would you be able to do a video showing how to set up the Flow 8 for a karaoke system with 3 mics, 2 DVD players output into Flow 8, and 1 ipad (playing youtube video) output to Flow 8, 1 output from Flow 8 to a laptop for recording, stereo output from Flow 8 to amplifier which then drives the speakers. Thanks in advance for your help.
How do you change the individual monitor mixes?
Hey drew! Great videos! Super helpful!
I have the flow 8 as a mixer for my keys rig (Roland fantom 6 and Nord Stage 4, both connected to the flow 8 by TS Jacks into the two stereo channels 5/6 & 7/8)
When I’m at home practicing with the rig I plug into the headphone output and the sound is clean as a bell but I’ve noticed noise on the XLR outputs…
I’m just wondering if you can offer any troubleshooting ideas to help me neutralise it?
Can you tel me what can I do to set up my channel thanks in avance
Lets say i was running tracks plus using some synth sounds on my mac plus using some piano sounds from my another two pianos. Would i be able to run all my piano and synth sounds from output 3 , Tracks on stereo 1 and 2, and click and cues on output 4?
Thank you for the excellent videos you produce. Is there a way of sending a mono mix to both L & R main outputs for live music use where speakers cannot be positioned for stereo use? If not, is there a way to mono the Bluetooth audio input as a workaround to achieve the same result for backing track playback? Many thanks.
If you are connecting with a phone for playback of break music or tracks you can change settings in your PHONE to play in mono. That is by far the easiest solution!!!!! On newer iphone it is under SETTINGS/ACCESSIBILITY/HEARING/AUDIO & VISUAL -- turn "mono" on.
Hi there,
I use the flow 8 for live performances.
Now... i am a midi controller player so i have a lot of hardware, and i WOULD like to have less, but that is practically impossible.
I would LOVE to have a FLOW 8 control software running on windows, so i don't need a tablet/phone for the controlls.... that is 1 less device and as said, i would like to have less because transport IS already quite a thing.... is there any possibility to connect the controlls with Windows 11?
I've ordered the mixer. I'm going to use in ears to monitor (non bluetooth). is there a way to connect bluetooth enabled headphones to the flow or is there solution to make the flow 8 output bluetooth via the headphone out and also convert my in ears to bluetooth ???
Drew, please help.....Can the front USB X32 audio playback be routed to the P16? We can't figure this one out.
Hi our backing music suddenly sounds tinny when going through Bluetooth.
I'm a beginner
How distant the bluetooth covers? Can I mix a PA 20-30 meters away from the mixer?
If your phone is connected via usb is it possible to play audio back into the mixer that way?
hi, is there any soft for using this mixer via bluetooth with Windows laptop for controling ?
I am experiencing some latency when I play Karaoke songs from UA-cam of my tv connected via blue tooth to the flow 8. How can I correct this?
can I control the flow 8 via usb? like if i'm using it as an audio interface on an ipad, I will use the apple's lightning camera connection kit's usb.... without using the bluetooth to control the app? I mean without the blueooth can it controll via usb?
Can you record a mic channel together with the Flow 8 effects into your DAW?
No. Only in idiotic streaming mode…strange logic of creators.
I'm having an issue with my flow 8 staying connected to Bluetooth. It keeps dropping connection and prompting me to reconnect during my performance. Annoying problem! Suggestions please!? Thanks.
The only annoying thing about the Flow is that multiple phones can't connect at once. Would be nice if two of us could have it open so we can adjust our monitor mixes ourselves.
That is exactly what I was looking to find out if multiple app connections could be made, but if this can’t I will have to pass on the flow unfortunately!!!😫
@@dannyporterguitarist Yeah I'd skip it if that's essential for you. Once someone else connects you lose connection. It's pretty annoying.
Greetings. But you did not specify, show and what can be changed especially on microphone channels. Compression...
I owned the FLOW 8 more than 2 years and i have to say something.
The App:
- is a piece of garbage.
- Glitch and freezing in slide mode.
- No possibility to accurately specify the number in hz in eq mode
- no visual response eq in Advanced mode (in default mode - it has)
Recording mode - OMG mode:
- You just cannot change channel gain without app.. Faders make just monitoring volume func. Why, if mixer has 2 monitoring channels and headphones?
All channels are PRE-FADER..and more..and more.
Its pretty cool device, but I really don’t understand, why this irrational issues are not fixed.
P. S. Sorry for my poorly english..😌
Behringer is really crappy gear.