AMAZING LOOK on my 2014 CHRYSLER 300S|installation
Вставка
- Опубліковано 2 січ 2023
- installing a newer model front end on my 2nd gen 300, it makes it look much nicer. the 2011-2014 bumpers are ok, but this one gives it the new style 300c look.
- Авто та транспорт
I have a 2015 bumper on my 2013 the fog light cover would it fit or does are 2 different bumper from 15+
Where’s the link!?
what’s did you do for the front fascia harness can you use a 15+ 300 harness on a 12-14 ? what about the parking sensors ?
Mine didn't come with front or rear parking sensors I believe there is a video up on UA-cam explaining how he did the front sensors for a SRT style front bumper
bru where’s the link to the bumper
i just swapped my bumper. now trying to see how i get my fog lights work seeing that the connections are different
I didn't have to swap out fog lights. All I did was splice the running lights from original fog lights. It was a direct fit from my old bumper just took them out of the old bumper fog light covers.
What type of screws did you use when you were assembling the kit for the fog lights? Mine didn’t come with them
I bought a set of screws from Amazon different sizes and just used the ones I needed. U may be able to find some at auto zone or home Depot. Not sure the size it was but it may have been 1/4 inch with fine point.
A bro what screws you use for the radiator cover the top 12 connecting the bumper to the radiator cover
I used pushed pines from auto zone..... The pack that has several sizes.
Great video, is that a splitter put on to the original bumper? If so, where did you get it?
No bro that's the 2020+ SRT-C front bumper.
Did the radiator support worked or did you have to remove it and just put the bumper on there itself?
Just did bumper itself. I did have to replace the 2015+ radiator cover.
I have a 2015 Chrysler 300 S trying to do the same bumper kit. I want to upgrade it to the 2017 kit but when I try to order they say 2017 won’t work on a 2015
Yeah it will work it says that because your old bumper guard won't fit. I deleted mine had to do some fabrication but it will fit.
Do you have the part number on the bumper the new one I will appreciate it
Nahhh bro I don't have the part # sorry I got it from Dodge dealership.
I have a 2012 awd limited. i wanted a newer look..would this work out for me? instead of trying to upgrade the whole car to get the look i want
If you're only looking to swap front bumper should fit 👍🏼
can you use 15+ Chrysler 300 harness on a 11 - 14 Chrysler 300?
Not sure bro mine don't have the harness
Does the bumper just fit perfectly on there or do u have to get other parts cause I want to do it to my 2013 300s
Slight modifications but nothing that's hard, all I did was trim some plastic from wheel cover where the bumper fits in and you will have to get new style radiator cover.
2015 Radiator support right?
@hbkkid5049 yeah..the top plastic cover
i just finished putting the bumper but the fog light won't work
Did u connect them right? Replacing the bumper shouldn't effect the fog lights if they where working before.
I bought this bumper as well but mine came with the fog lights and running lights any idea where i can find the harness?
MOP-68216116AB I found these on summit racing web site.
@@MOPAR_CRUZ Thanks
How did you splice the LEDs to fog lights please help
I got after market LED bro I did not use the mopar running lights.
Where did you buy you fog light bulbs at ?
Ebby 👍🏼
Did you put the absorber back on?
No wouldn't fit I even try trimming it. No luck so I delete it it.
Serious question bro!. I wanna bumper swap and I was wondering if the 2014 fog lights would fit with the newer bumper?
Yeah bro they fit. You just have to remove them from your old bumper.
@@MOPAR_CRUZ ah sweet man!. What’s the eBay link for the led strip you used ?
@@thatguypal I looked them up but currently unavailable, look up led strip 10"
@@MOPAR_CRUZ I sent an insta dm bro!
Where did you purchase the bumper from?
MOPAR PARTS CORP.
Hey can you leave the link in the comments so others can find it
Link to what?
the led strips you showered are those the ones you bought ?
Yeah bro from Amazon
I bought the bumper but I don’t have the led light you think you could share the link of the original or the Amazon ones please🙏🏻
@@monk3ycr4zy17 Check out Daytime Running Light Bulb Mopar 68187875AA on eBay!
www.ebay.com/itm/354480362401?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=TkxDbLFnT0-&sssrc=2349624&ssuid=5b7kg7pktzg&var=&widget_ver=artemis&media=EMAIL
@@monk3ycr4zy17 those are the oem ones I'll send u the led I used from Amazon
EEEKit Daytime Running Light, 9 LED DC 12V 4.5W Driving Daylight Fog Waterproof Dustproof Light with Adhesive Tape for Car Truck Trailer Boat, 2 Pack, White a.co/d/716XBY4
Is it possble to just do this to the 11-14 front bumper? I like that bumper styling better than the 15+. What you think? If not I'll just take the L and use that one.
I been looking for this answer myself. I have a 2016, but like the look of the 11-14 SRT bumper. It’s like a mix between base & the newer appearance style bumper.
@@isvvx well if you ever do find the answer comment back here.
I had found this guy who did this though. His is all custom parts. I think that's the only way so we'd have to probably 3D print it out or something. ua-cam.com/video/6b2BS6DU5ZY/v-deo.htmlsi=jqcbVdWv6JHl9ToJ
@@Junior305able No doubt
That's the 11-14 bumper he just added lower custome front lip.
Where did you get your front bumper
Dealership but you can try eBay. 👍🏼
Do you know the part number for your front fascia harness ? Been looking everywhere
Mine didn't come with front parking sensors. I didn't use other harness.
@@MOPAR_CRUZ mine doesn’t have parking sensors either but my harness wasn’t there I’m not sure what the first owner did with it 😭
@@ralf8534 damn bro. The only thing u can do is run it with out fog lights. Look up on eBay u may be able to find one.
@@MOPAR_CRUZ do you know the part number?
@@ralf8534 nahhh bro I don't sorry.
hey can you please tell me where did you get that Bumper at please 🙏
Mopar parts corp.
can you share the links
I have a 2012 Chrysler. I’m trying to do the same thing. How do you do it?
It's not hard bro there is some fab u have to do but it's easy you just have to delete plastic bumper guard and new radiator plastic cover.
@@MOPAR_CRUZdid ur this bumper u got come wit the side lights and what’s the website
@@Everybodyshinetogether1 no it did not come with side markers. They on ebby motors for like 30$
how about the rear bumper? can a 2015 model fit on 2013?
Yh
pretty sure you can swap the taillights too and make it look like the new models
Yes u can as long as u swap tail lights.
What kind of rear bumper are you rocking?
For now the SRT style one with rear diffuser. Gonna change it up to the 18up one's soon
@@MOPAR_CRUZwhat did you do about the side markers lights for the rear
Do you need to buy the 2015 front clips?
Yes along with the 2015+ radiator cover.
@@MOPAR_CRUZ how many do I need?
@@007ejgaming try getting it from Amazon. Mopar clips they should come in a big box with different sizes
@@MOPAR_CRUZ oh my bad I meant the fascia brackets
@@007ejgaming oh no not at all. But you do need to trim some of the bumper inside the tire. And either try to find a plastic bumper guard or just delete it how I did.