Fixing a boost leak on an Imola yellow Audi B5 S4
Вставка
- Опубліковано 3 жов 2024
- Fixing a boost leak on an Imola yellow Audi B5 S4
Follow us on Instagram @getwatkins
Like us on Facebook @germanelitetuning
#germanelitetuning #getwatkins #b5s4 #audi
our customer and friend Louis @louismjr on IG Had a check engine light and low boost due to limp mode so he asked me to check it out for him. I found that he had multiple faults all pointing in the direction of a boost leak. After inspecting the charge system I found the throttle body boot had come loose at the throttle body causing the leak. After resecruing the TBB to the TB I took it for a drive. All is good and its back to 21psi again. this is a super clean and fun Imola B5 S4 and the pops and gangs sound crazy with the AWE twin 1 exhaust. Thank you for watching.
Customer service on a different level. Time for an apr bi pipe if I can find one 🤣
louquattro we will see if we can find one for you.
thank me later xs-power.com/audi-turboinlet-pipes-9.htm may not be APR original but its the same design
those LASR look super good
@brad , nice to see you know your way around cars also not just tuning , (Y) keep it going #getwatkins , i want that pop and bangs tune
simon prevost what’s up Simon. Thank you for watching. 15yrs as a vw master tech helps a little haha. Let me know when you are ready for a tune.
Sounds identical to what's going on with one of my b5s
Dope video as always 🙌🏽🙌🏽
Pay-Per-Drew Thank you very much 🤘🏻
Beautiful car!
What kind of FIS display is that at 3:38 ? Looks like it was replaced by a new one with a glossy screen and full color right?
Looks like it may be a generic lcd. Some of mine that I’ve gotten are glossy
I saw your video a year ago. Just checking it now again. Just wondering mine could be the same problem or it is more likely waste gate. Today i checked again with my fault reader. Fault code is P0103
Good job!! Whats the best throttle body clamp for 034 boot
maks740 thank you. I like using a tbolt clamp that is thick enough to cover the lip area of the tbody that way you can tighten the clamp really right.
German Elite Tuning Thank you very much and any particular brand?
What if your battery light is flashing after replacing alternator
what are the spec's of the intake? thanks!!!
It’s a 104mm intake pipe with a hitachi maf sensor. I’m not sure who made it tho.