DIY ELRS "Pico" 3 CH PWM Rx Perfect for Pint Sized Planes!
Вставка
- Опубліковано 27 вер 2024
- Is this the smallest PWM receiver? Probably!! I show how to mod a Happymodel EP2 serial receiver to output PWM. It's only 3 channels but that's usually enough for small planes.
🔗 Please tell me if any of the links provided no longer work!!
🛒 HappyModel EP2 RX 2.4G ExpressLRS s.click.aliexp...
🛒 Mustool G1000 Digital Microscope s.click.aliexp...
🛒 Foam Glider Plane s.click.aliexp...
🛒 Matek ELRS-R24-P ELRS 2.4GHz Receiver s.click.aliexp...
🛒 RadioMaster Pocket Hall Gimbal Transmitter s.click.aliexp...
🛒 HAKKO T12 LED Digital Soldering Station DIY Kits s.click.aliexp...
🛒 T12 Electric Soldering Iron Tips T12-K B2 BC2 ILS JL02 D24 KF s.click.aliexp...
👀 Click Here to Subscribe bit.ly/1nformatica
🛠 I buy most of my gear from s.click.aliexp... You can help me by using these links!
👍 Follow on Facebook / 1nformatica
💲 If you would like to buy me a coffee: www.paypal.me/...
DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica
That's brilliant, man! 😃
Thanks a bunch for the tutorial!
Stay safe there with your family! 🖖😊
Thanks Mario! I am constantly amazed by what is possible these days!!
Do you know if this can work with betafpv 915 nano receivers?
Probably yes. On the EP2 the GPIO Pin 15 is used to enable boot made so the pad is available to solder to : ua-cam.com/video/pkhymye5W8E/v-deo.html You would need to see if the boot button on the BetaFPV 915 uses the same pin. If not soldering to the GPIO pin on the processor is an option! Thanks for watching, have a great day!
To show my total lack of knowledge about these things ..... Is it possible to do the same pin mod and program them to output S-bus plus 1 or 2 PWM channels at the same time. Somewhere in the boxes here are a couple of Radiomaster mini ELRS receivers like that. The Junior Brains Trust hasn't had the time to sort us Old Farts out there yet!
If so, that's 1 more way to put a brushless motor into a brushed toy with S-bus/DSM satellite sockets. 🤔😊
Well yes / maybe!! You can select CH2 to be serial Tx at which point CH3 will automatically change to Rx and cannot be changed. So you can have SBUS or CRSF on pins 2/3 and still PWM on CH1. CH4 &5 would be possible for PWM (I think) IF you can solder to the ESP8285 pins 18 & 19, there are no pads on the board I can see. This is beyond my megre soldering skills!!
@@1nformatica LOL! You can talk! You should see some of the disasters here, perpetrated by various individuals, depending on their respective levels of descent into Parkinson's! 😱🙄
@@theoztreecrasher2647 I usually have the dt's in the morning so wait for the afternoon when I can get my trembling in sync!! BTW which sbus "brick" are you using?
@@1nformatica 😂We can't even claim that excuse since most of us are banned from booze by the quacks! 😉
S-bus "brick"? Usually FrSky/Flysky/Radiolink S-bus mini receivers with the Radiomaster TX16S 4-in-1. There are 2 Radiomaster ELRS mini receivers here somewhere waiting. RP1 and RP2 I think. 1 has that little ceramic antenna.
@@theoztreecrasher2647 Sorry, my bad! I meant the DSM/SBUS "brick" usually with servos that you want to connect to in the model......
Great! If it showed RxBt not 0 in telemetry, it would be even better!
For some bizarre reason the ADC pin is not present on the processor. Both pins 5 & 6 seem to be removed on the EP2. There maybe other similar receivers that have the pin. Thanks for watching, have a great day!
Great tip. What about MATEK ELRS-R24-D can i do the same with it ?!
You're welcome! I see no reason why it should not work with that receiver. Only difference is it has a reset button instead of a pad which will make soldering a bit more challenging! Have a great day!!
Clever stuff! 👍
Hey thanks! Have a great day!