IKEA MALM 6 Chest of drawers Assembly
Вставка
- Опубліковано 12 вер 2024
- How to assemble MALM Chest of 6 drawers. This Ikea MALM dresser coming in five different color combinations. Current cost in the UK from for this IKEA Chest of drawers1 is £80-£100 depending on the finish. MALM 6 drawer dresser assembly is a bit challenging as it is bigger frame Width:160 cm Depth:48 cm and Height:78 cm so is harder to work around this IKEA MALM 6drawer dresser. But if you follow my video IKEA MALM 6 Chest of drawers Assembly and you should be fine.
ONLINE SUPPORT:
Here you can get extra online support if you having a problem with assembling your Ikea furniture. Online support one to one video call will be available to Patreon supporters and all funds will go directly back to the channel helping buy better equipment enable me to spend more time to continue creating more Ikea furniture assembly tutorials. Thank you for your support.
/ ppflatpack
**Tools I'm using **
Small electric screwdriver
amzn.to/2AYddCK
Bigger drill and screwdriver all in one
amzn.to/2RJMJiP
For more tools for furniture assembly or general DIY adventures.**UK**
www.amazon.co....
Here is my stuff :
Flat Pack Furniture Assembly London
www.ppflatpack....
ppflatpack@gmail.com
/ ppflatpacklondon
/ ppflatpack
/ ppflatpack
plus.google.co...
/ ppflatpack
/ ppflatpack
Upon unboxing, I was immediately upset at how the rails were very noticeably bent. But I kept going, all tools needed to assemble were included ua-cam.com/users/postUgkxqtX4Dxs6aecAZEuz6GY5-d81YecKCshn and I had it set up in about 30 minutes. Honestly I love this thing, make sure to read the measurements and measure your space so you know if it'll work for you. I bought this to put inside my closet, underneath where I hang my clothes and it is absolutely perfect! It is VERY sturdy and all drawers glide easily and mine are stuffed, and they are still flush when closed.
Currently laying in my floor stressed behind these damn drawers! At this point the clothes look good in trash bags ...
Haha 😂 did you put it together?
Yes! Finally the tracks came pre assembled and they put them on backwards 🙄
Lmao
I’m dying at your comment whilst having a toilet break Lmao
I’m never following IKEA instructions again if there are quality videos like this on UA-cam lol such a big help
Currently loosing the will to live trying to put this up!
Patience is the key :)
Lmfao
SAME 2 rows in so far...
SAME HERE
The plastic srcew is extremely hard to deassemble. Stupid design.
I think after watching this 5 times I’m ready for combat !
Oh yes that's good start ;) Let me know how it goes.
bruh u know this is racist right?
@@e.2loco what the fuck is racist about that comment
@@batube9516 the fact that he is Russian and it has to do with Russian soviets and battle, plus that comment has nothing to do with the video. Stupid
Awesome video, but I'm never doing this again ever. I'll pay somebody $200 to assemble it next time.
BEST tutorial ever. You saved me so much time. I got 2 Malm dressers and was able to assemble them without problem. Really appreciate you having posted this. Thanks a lot.
This video was so helpful. My sister and I did it together in 3 hrs without making any mistakes. Thank you so much!
Thank you for watching ;)
Thank you so much for this video. You really made it look easy. Now time to put mine together!
tmmt44
4
.g2ryyyyyy4nr h6aygjhytyyggt6gyyyyyg7d7y7yyjry5.
..
.4t
m
..
m.
m
..
.m
mry2et2g31t.23x gre3x3tr.rhr
r
r
tnrhjkhgt8tt98yh99h99ht9h9hy98ht9ht9ht8ht
This is more informative than the instruction manual, 2nd thing I’ve purchased from ikea after the malm desk
A lot easier than the paper instructions! Thank you!
weeklyone Thank you for watching
Great tutorial! I was able to do it all by myself too since my wife is pregnant, this drawer’s gonna be for the baby’s things and some of ours. You provided techniques to make installation quicker!
Thank you for watching
I'm amazed you were able to go solo getting the top part assembled. I had no choice but to have my friend assemble it with me.
Glad you make it. Thank you for watching
ياااااااااااربي لك الحمد والشكر
فكيت إدراج خالي الي مثل هيك وما عرفت ارجعهم غير لما حضرتك
جد شكرررررررا
كنت ميته خوف والله 😂😂😂
I like assembling furnitures, i just assambled my white 70 inch Brimnes tv table. Just took me 3 hours because of my job. I assembled it in two sessions of 1 hour and a half per day
I have come to rely on watching your IKEA assembly videos before each piece I have to build. They are very helpful and I especially appreciate the time-saving tips. I'd love to see you add the average build time for each piece in all of your videos descriptions. Thanks for posting these!
I was adding build time in first videos but people got confused because what is for someone who doing this professionally 1hour for another person can be easy 3-4h. Thank you for watching ;)
Thank you. Your video is way more comprehendible than the instructions that came with it.
Thank you for watching :)
Lola is so adorable!! thanks for this tutorial, planning to buy one for Christmas.
Ace this.
Nearly 100% sure this will take me 5 days to build!
Man VS Ikea
man wins this time. i wish i could hire him to assemble for me
:) life vs IKEA
I am not one with patience putting anything together, even the simplest Walmart bookcase. This dresser will be... a monumental fail before it becomes a "masterpiece" by my definition. Thank you for your video...
In that case better to call someone who know can avoid unnecessary complications, divorce, nervous breakdown or hard attack. I see it all. :)
Oh wow, thanks so much for this video. You make it look so easy. Now, off to hire someone to do this for me because I cannot. 😂 Thanks anyway!
😂😂😂😂that is soo me, just did the same…😂😂😂
Thank you, thank you, thank you! You saved my sanity (and my Malm chest of drawers). Clear, concise, easy to follow (and hard to screw up!). You should be proud of yourself.
letmeinwillu thank you for watching
Building these today, 6 draw, 2 draw an 2 matching wardrobes. Wish me luck haha. Great vid!
Just finished building this thanks so much for the easy instruction s its 👌
Thank you for watching
So glad I came to UA-cam and your video was first. I absolutely, somehow managed to put the top on backwards. Had I never watched your video...I would’ve thought mine was defective and ended up calling IKEA. 😂
Thank you for watching
this dresser look exactly the same as the ikea dresser I bought but some of the parts are little bit different, still this video helped a lot
You right there is new version out this is the older one. Will be doing new one soon. Thank you for watching.
Watching this video trying to mentally prepare myself, best one on UA-cam
my Malm set came with 3 boxes...
Mine too
Mine too
Mine 2
Mines too
And my axe!
What an absolute legend you are. Thank you
mines coming in 3 days, i’m preparing lmao
That was so smoothly done. I am still preparing myself to install mine today. Thank you for the video. 🖤Good luck for me😅
Let me know how it goes. Thank you fr watching
Many thanks to you for the video. I couldn't have done it without your help.
Never saw someone that confident at building ikea furniture. They generally instill fear into people.
Quality video. This will help me put mine up now. Thank you
Thanks for the help! This video is still relevant if you buy and older version of the Malm chest used, as we did!
New version coming soon. Thank you for watching.
Thank you so much for the great assembly help Mr.PP flat
you are the savior
thank you bro
Incredibly helpful!
Wow you are so helpfully, thanks very much appreciated a lot...from France 💖
This saved me soooo much time!
Thank you for watching
Just got this dresser. Wish you were here xoxo
Спасибо добрый дядька! Всё собралось, как в лучших домах ЛондОна и ПарижУ)
Thanks it was of great help
Thank you for watching
You make this look so easy
Gonna try and battle this tommoz with no electric screw driver wonder how long this will take me 😂😂😂😂
Without electric screwdriver will be challenging. Let me know how it goes. Good luck
PP FlatPack took me 6 hours haha but finally did it
Just bought the black model of this dresser. Hopefully this be a piece of cake because I don’t know how to build.
Very helpful video - thanks a lot. You saved us a lot time :-)
Thank you for watching
They need to sell this assemble al ready
I love your smile you seems like a very nice person thank you for the video and for the speeding process for the drawers that I have to finish tomorrow thank you so much and peace and love from Paris France
Thank you for watching
The accent is awesome
Thank you for listening ;)
Superb video! Please start doing car repair ones too!!
;) Thank you for watching
thank you for sharing your Exellent step by step instructions video!👍
Thank you for watching
Made it much more easier.. love it
Great video!
How did you get all the drawers to fit so perfectly? One of my six is terribly misaligned (at least according to me, but I’m a bit picky and perfectionist about this sort of stuff). The others are almost perfect, but one is just “off”.
Is there a trick to tweaking and correcting the drawers so they align perfectly?
Thx
manufacturers defective.
Thank you for your time 😘🤚
Будьте Здравы Люди Добрые!
Great video, but I think most of us would love to see the actual time to build. Thank you.
Thank you so much for this video! ❣️
Thank you for watching
Do you have to mount it to the wall?
Wow some1 help me I don't find the first peace the long one wth
Lmao the maciejay outro music
thankyou from Indonesia Sir!
Thank you very much.😁
Excellent product!
Great job! Awesome video!
Ok so it doesn’t have to be attached to the wall? I keep seeing that it’s required now but the way he built it looks completely fine without having to be attached to the wall
Hooking that metal supports at the bottom of the drawer sent me for a loop, but I see now that I might need a drill
I can only get 2 out of the 6 drawers in the dresser the others just don't fit
SUPER helpful! THANK YOU!
Thank you for watching :)
Thank you for the video.
The 6 panels that came with double sided tape only come one sided taped.
We brought this two weeks ago,
Thankyou, this was VERY helpful 👍🏻
it's interestingly satisfying to watch wtf.
Hahaha that's right this is Ikea therapy session ;)
excellent, made my job a lot easier.
Hi - Thanks for video. I am getting 1 issue - hope you can help. Its at point 2.28 sec of video - so the wooden screws are not inserting properly in the plank. Do i need to change the size in plank manually and then try the fitting? Thank you!
Thankkkkkkk you so much for this video!! ❤️
Verry good vidéo !! From France
This helped me lots thanks bud
Thank you your videos help me a lot 😊
Great Video. really nice angles an commentary.
Thank you for watching :)
PP FlatPack hello, do u no if this could hold a 100 gallon fish tank?
Can you make a video on adjusting BESTA drawers? These drawers are an absolute nightmare to align!!! 😫 😩
Ok so on the back of the malm on the part that is TAPED TOGETHER does the tape go on the inside or outside
I spend about 5 hours to assemble my 6 drawers Malm last year.
Oh my! Thaaaaaaaank you for this video!
Thanks you helped me❤️
Everytime I put my drawers in they’re scraping at the sides and are difficult to put in and out I’m sure I done it correctly so I’m confused
It come with 3 boxes now!!
I️ don’t know whats different from my stuff from yours but I️ think I’m missing something
Michael Garcia The newer malms are way different it’s separate
Several design changes in the 2019 version of this product have left me scratching my head while trying to put it together. The drawers now come in 2 boxes of 3 + 3. There are holes which are not used in half of the rails on the drawers. I panicked when I could not find the long connecting piece that he works on first. It looks like that has been replaced by two shorter, sturdier pieces which screw onto the center divider with "L"-shaped clamps. I have found a few discrepancies in the drawings that don't correspond to the parts. Undoubtedly I will find more changes before I am through.
Thank you for letting me know about changes to this model. Will do the new version as soon I get the chance.
@@PPFlatPack Thanks very much for your reply. Your video has been very helpful in understanding how the pieces fit together. It is maddening to realize that there are up / down and left / right differences in otherwise apparently identical pieces. It is so easy to make a mistake if you don't pay constant attention to the instructions, as unclear as they are. It wouldn't hurt for Ikea to point our attention to where finished / unfinished pieces need to face in or out and maybe use arrows to indicate which end goes up. For example, it was your video that made me realize that the first piece to work on is the center divider - I thought the first diagram in the instructions was one of the ends. The instructions did not make that clear at the outset. Thanks for your help!
@@robertgreenhouse I agree - spent ages putting these together last night and could've done them much easier had I seen this video first ! Not sure where we have gone wrong but our drawers do not slide open and closed very easily ? they are all catching on something and I can't for the life of me work out what . It seems to make a bit of a grinding noise on the runner part in the centre divider section area as if the wheels are struggling and then gets completely stuck about 5 inches from closure ? Takes a good push and a jiggle around to get it to continue to close (which isn't going to last long if we have to do that every time we use them ) Have checked that the runners are on the right way up - none of the instructions actually makes it clear which way they should be - any ideas guys ?
@@robertgreenhouse Hi robert, thanks for your comments. I'm in NZ and to my dismay, have just figured out that the pack I've just unboxed, does not match this video for the reasons you point out. I'm stuck without a video that uses the same parts! Given you have been through this, I just wondered, did you end up using the video as a 'general guide' only, or could you still follow it quite closely? I'm very nervous about the smaller parts as you say, IKEA does not instruct up/down/in/out. Any tips ? Thanks
@@ginagarvey3474 It's been a while since I put the kit together, so I will answer from memory. The video was very helpful for sure, but it took me a while to figure out that the video showed a long strip of wood across the bottom, which given the fact that you are dealing with particle board, has got to be vulnerable to breaking because of its length to width ratio. They must have learned that and redesigned the kit such that now there are two half-length pieces to replace it. Essentially the two dressers are assembled separately then bolted together rather than being assembled onto the long strip along the base.
The other difference is that there are three packages instead of two in the video (two for the drawers). My advice is to lay out all of the pieces at once, watch the video to understand which piece goes where - label them if you need to - and then rewathch the video stopping it at each step. Pay close attention to symmetry or lack of symmetry. The one mistake I made was in not noticing that a set of predrilled holes - I believe it was on one of the end pieces of a drawer - were not centered vertically and that it was possible to try to put the end piece onto the assembly upside down and reversed - in which case, the holes were slightly off, and I tried to force them together until I realized my mistake and had to disassemble the furniture and reattach the end piece.
Bottom line - identify all the parts, make sure you understand how all the pieces fit together before starting. Pay attention to finished vs unfinished surfaces (another difference from the video in which apparently all surfaces were finished) and give yourself a couple of hours to do the project - better to be slow and sure. The drawings are terrible (there are a couple of holes which are not used and do not show up in the drawings) but I found the video to be a big help once I understood some of these differences. Good luck.
This dresser looks decent. Is it big enough no put a 55 inch TV on top? Tired of mounting it on the wall
omg .....13 Minutes ???? I NEED 3 DAYS
Very helpful
There is another option for MALM 6drawer chest and video will come up tomorrow. Thank you for watching:)
Is there a hole at the back of the drawer in the last step, or did you make the hole with the drill?
Only this hole is not predrilled you have to do your self. Or just press harder on the screw it will go in without drilling hole before as you see in the video.
Yea that's the only part left for me. I'm scared to press hard and it goes in crooked
Be careful building facedown on carpet, if some of it gets pinched you will not get it up. I build it on the side and go up till it looks like a skyscraper. Then lay facedown to nail on the back panel.
Looks sturdy but I dont like compressed wood. I prefer real would and that's a problem I'm having right now bcus I cant go see at the actual store because they are temporarily closed
Очень хорошее видео! Меня зовут Лилия,хочу себе такой комод.Ваше видео в тему! Привет с Украины!
Спасибо за просмотр :)
@@PPFlatPack неожиданно увидеть ответ на русском! Спасибо Вам за видео!
Thx bro nice helped me out a lot
Nicee!!! Made it look easy👍
Can I use the small electric screwdriver for the entire assembly or do I also need the bigger drill?
bebeg1rl you definitely can use an electronic screwdriver but start the locking pin screws with a hand screw driver at first. This will prevent the screw going in at a angle and possibly damaging the hole.
pierre andrada do you need an electric drill at all? i don’t have one
@@hannahverne5419 no, you don’t. Just makes it go faster.
How many pairs of jeans can each drawer hold? I have close to 30 pairs of jeans and I can't find a drawers that can hold that many jeans, many t-shirts, and few shorts