How to cut glass, normal VS safety, tempered?
Вставка
- Опубліковано 6 сер 2024
- Big- O, DIY Glass cutting, glass, tempered glass, how to, how to cut glass, glass cutting, @thisisbig-o, laminated glass, cutting tempered glass, how different glass breaks, can you cut tempered glass?
Im glad you did this video .You made it plain and simple. Know I know how to tell the difference in safety glass vs plain .. i never knew that aspect on identifying the differences. I do know tempered glass does not like to be cut and has an explosive attitude when broken . thanks alot guy!
Cheers Randall!
Great video! As an Autoglass tech you are 100% accurate. Was wondering if I could cut tempered but my suspicions are confirmed. Thank you!
Cool to see how different glass behaves when it breaks!
👍👍
Straightforward and informative. Thanks.
Great video thanks for sharing
Thanks, this saved me big time! Haha damn, I was so close to cutting the tempered glass I salvaged
OMG !!!
THANKS ! You just may have saved me a massive cleanup, I'll never know 😜 for that, I've subscribed.
Great technique and explanations. An alternative to spraying alcohol and lighting it is a couple passes from a propane torch along the score line.
Thanks Greg! You'r right, have a good one buddy 👍
tqvm! for sharing this knowledge.
Thank you very much. 👍
this is the most educational thing I watched today lol
Excellent film!!! Thanks!!!!
Thank you! 😊
people told me its impossible. i knew it isnt. will try cutting my tempered glass today :) tnx bud
It is impossible, I cut normal and laminated glass, you can't cut tempered glass.
@@thisisbig-o wow -.- tnx man
awesome tips!
Nice video, thanks brother!! Oh and cool hat 🤙
Thanks Raul🤙
thank you
cutting shower rain style glass, what method would you use?
Nice job bro
Great video man.
Cheers Brandon 😊👍🏻
Do you know how to cut the thin toughen glass of a glass screen protector? Gorilla Glass type stuff.
At last, at last, a video that shows how to cut glass PROPERLY. Ignore ALL the other videos, just watch this and do like he does AND DON'T TRY TO CUT TEMPERED GLASS !!! You can tell it's tempered as there is usually an etch printed logo down in the bottom corner, or the edges are ground smooth (arising, pronounced areesing), or rap on it with your knuckles and it sounds dead. If in doubt, don't cut it.
I got tempered glass cut with a laser.
@@mrgcav I have heard people claim on numerous occasions that they were able to cut tempered glass with a laser, but I have never seen it successfully completed even though I have witnessed attempts several times, including a trip to Germany to visit a company who said they had perfected the technique. I was there as part of an emerging technologies engineering team to see if it could be done, however unfortunately the folks who claimed to have done it were unable to successfully repeat the process while we were there. Every attempt failed.
So I am very curious where and when you had tempered glass cut with a laser? My initial reaction is that it wasn't actually tempered, even if it was supposed to have been, but maintaining an open mind.
Did I miss how to cut tempered glass?!
Nope, no one can cut it, so you will never see it done
@@thisisbig-o- you shoulda said so
It can be done with lasers but this isn't a domestic job
Nvm I'm mixing up tempered s afety glass and laminated.
Dunno if laminated can be laser cut. The plastic would melt
@@Douglas-hw8is he did ..
Nice one. Really good vid.
Cheers! 😊
That's why safety glass in used for shop windows, homes etc etc, shards wont fall and hurt passers by! 🙂
I like your demonstration super
Thanks Rudresh! 👍😊
Is there any chance for amateur to cut two layer safety class with dimensions off 1.9m x 2.3m x 10mm ?
Hello sir i have a elctric oven glass so i want to cut it to ues it for heater glass .so can it cut and how ??
Best glass explanation
Let me know if there's someting else you would like to know about glass and I'll try to get it out there 😊
I saw a guy from India cutting thick glass like 1/2". He did 1 cut them simply tapped along the cut and you can see the crack continue along the cut line. Not sure if tempered or simple plate glass.
Have you ever seen glass cut on a score and snap tile cutter? I have an old storm door I want to salvage the glass from for the lizard enclosures and I'm wondering if the breaker would cause cracks other than on the score line
That might work but I would put a towel in there to reduce a concentrated point force.
It's doable but dont apply much pressure
Thank you so much. I feel like I've just taken a glass class.
A top class glass class
Great video… do you think it’s possible to custom cut my shower glass to fit my bench
Hi
Thanx! 👍
No, in showers the use safty glass, so that wont work
I need to cut a tempered glass chair mat for my desk area. What cutting tool is best?
a hammer
Now show how to form ballistic glass... (I miss the tempered glass in auto side windows, used to be common to pop them for access at accident/fire scenes. Now half of them are using laminated or worse laminated gorilla glass. Makes it much harder to do extrications when you can't get through the glass.)
I know Blazer safty hazzard, imagine driving in to water 😱
Hey goddammit! You cracked my screen.
You didn't show how to cut tempered glass. So tempered glass can't be cut at all? What about with a wet saw using a diamond blade?
No chance mate, there is no way to do it
Hey man, thanks for the video. I had this idea to take old patio door and cut them to make home made, custom made windows.. I guess this is impossible, right?
Thanks!
Depends, OK if it's laminated (unlikely) or (more likely) it's a TDP (toughened door panel) it will usually have an etch mark in one of the corners, with the maker's name and "toughened" and some numbers, this cannot be cut.
@@stewartmcmanus3991 Thanks Stewart!
How do you start and end the score without chipping the edges. Especially at the beginning of the score. When I place the wheel at the very edge the end of the glass chips when I apply pressure. If I try to avoid that I end up having a very small part at the beginning with no score mark.
I guess it's a thing that comes with time, but you don't have to start at the very edge, you can leave a couple of mm 👍
@@thisisbig-o Thanks
you might also be applying too much pressure on the cutter. If you see any flaking or chipping as you score the glass you are applying too much pressure.
Okay, question. I have a pane of glass for a table (5/16" thick), I deep scored it on both sides and I can't get it to break. I don't think it's tempered. How do I break this pane of glass that I have?
I guess it is tempered, otherwise u could do it, never a need to score both sides though unless it is laminated and there are 2 layers
Explain what it was that you sprayed from the bottle to sever the membrane that was laminated between the two pains of glass?
Hi
It was alcohol, it helps to light it, but it will sever it even if you dont light it 👍
@@thisisbig-o Thank you for the reply so quickly. I have learned from your video That the piece of Safety glass that I wanted to cut is pretty much a not a doable task..
Is there any different angle of holding the cutter while cutting the glass? Like 45° or 90°
Yes there is, if you hold it on an angle left to right the edge will tilt that way.
Thats a good question, will make a video on it shortly, cheers!
And now we'll show you what happens when cutting tempered glass. (Hits it with a hammer)
The point is you can't cut it, you would have had the same result with a cutter
Well that's great you showed us how to break glass but you didn't show us how to cut tempered glass
What is the best glass cutter and where do I buy it from?
We by them from Bohle, silberschnitt👍
So does that mean you can cut a glass splashback if you follow your technique or not? I have a splashback that i ordered too long by mistake and need to cut it in half.
Hi
Great question!
Glass for backsplash should be tempered otherwise the heat from the cooktop would break the glass since normal glass will crack when heated up, so if you got if from a glass company it is tempered and you can NOT cut it Ryan
@@thisisbig-o Thanks for the response-appreciated
Sir can you please tell me what you have sprayed on tempered glass after cutting it on both sides ?
Hi. Off course Johnny, it was a type of alcohol I sprayed on, but it was not on the tempered glass, it was on the laminated, to soften and burn the foil between the to sheets of glass.
I have a large piece of thick beveled edged glass that was the table top for a dinning room table. I want to repurpose it and use the glass for an aquarium build. I only have one piece so I can't mess it up. How do I know if it is tempered or not? It has beveled edges and I can't see if it has the film in between....I assume it is tempered because it was a dinning table top...very heavy and thick....please advise!! Help!!
Hi Shane
Sorry for the late comeback, I would agree with you, since its been used as an table top there is a real good chance that its tempered.
I am going to suggest that if the glass is 8mm or thicker, and made in US, then it is possible that it's not tempered. If the glass came from China then it almost certainly is tempered. And I know that sounds wrong, but it's true.
I retired a few years ago, and up to the date that I retired the US did not have a code requiring that furniture glass be tempered, while China did. I only mention China because a lot of furniture glass is imported from there.
Furniture glass probably isn't going to be labeled tempered or not (although I have seen exceptions), so that makes it a lot harder to tell if it is or not.
I have a mirror that is thick and long, I want to cut in three, I have problems with my hands and no help what will help me cut this mirror what tools do I need
You just need a glass cutter, but it helps with a steady hand
Nice. Now how to cut 1/4” of the temper glass. I need to make my shower panel 1/4” smaller. Is there any way? Thanks
There is no way mate, if it's tempered it's staying the size it is 👍
They have glass stretchers/shrinkers at home depot...
@@godbluffvdgg Haha, that would be great 🤣
hi sir i'm intrigued by your good video...and what brand of cutter do you use?
Silberschnitt I think. Get them from Bohle
Thats right Martyn 👍
@@thisisbig-othank you! I left the glass industry after 16 years... but it's still in my head. I don't miss the frustration of working with it at times.
Tempered or laminated
So I have a square o tempered glass 600mmx600mm and want to cut a u shape at the top for 6 inch ducting ?
No can do, sorry mate!.
Hi there I have a dining table which is baked glass is this possible to cut?
You should be able to cut it 👍
I got a tempered glass magnetic whiteboard 4 X8. It's too big for our homeschool classroom. How can I cut it in 3 boards, since it has a metal sheet on the back?
Hi Noles
If it's tempered glass you can't cut it.
If you need 3 of them you have to get new ones, the tempered glass you have is the sice is is now or in a million pices
Probably way too late to reply, but if its a true glass/steel plate hybrid, the glass would have been laminated to the metal using a 10% or bright white PVB interlayer and the glass would not have been tempered. However the only realistic way of cutting the board into three pieces would be using a waterjet to do it, and I wouldn't consider that option unless the waterjet operator was very familiar with cutting glass.
Where can I get a glass cutter like that?
Hi Jim
You can get them at toyoglasscutter.com 👍
So overall safety glass seems to be the best of the 3. Not only does is it safer but you can cut if as well.
Yeah, laminated is the best in my opinion
The downside to laminated glass as I learned through the same exact principle as automotive glass with tents on it is that if you use something to apply force to it say such as your right elbow well that glass will shatter and if you have enough force and momentum going you'll actually also put a hole in it but the downside is that the glass will remain together and it will literally cut the everliving bejesus out of you and cause you to walk into your mother's bedroom at midnight holding your arm wrapped with a towel because you were profusely bleeding everywhere because you're not only an idiot for shattering a '99 Ford ranger king cab window on the suicide door behind the driver's side but you also drink a whole lot of Jack Daniels so you're bleeding even worse than normal. I can also tell you that they will not put you to sleep in surgery and it's really not that bad having glass pulled out of your bone in your forearm as long as it's numbed up of course it was loads less painful than the following rejection I received from the smoking hot nurse who willed me out in the wheelchair that I asked out on a date. Just thought I would share that.
Wait til end to se how different glass behaves when it breaks, normal, laminatet and tempered
Hello there master craftsman someone of your skills could advise me what would be the best shockproof, waterproof glass and something resistant against fall would also love to cover it with a nantotech liquid for further resistance it will involve copper as well.Anyway the project is a laptop casing assuming I had the design and I could write that with a laser would someone in this trade be able to help me out cutting it as the very project will first be 3d and then we will see what goes from there on.
This project of mine is actually an experiment with glass I need something water proof, shock proof, heat proof and something that would be resistant to breaking no scratches if it falls would something like that be possible and what would be your advice?.
And always wear safety glasses when cutting glass. I've found glass shards all over my glass studio and I'd rather not get them in my eyes.
That's always a good call 👍
Can tempered glass
Cool video most people don't know much about glass except for the fact that it will mess you up. Why did they design tempered glass to shatter into so many little pieces? I understand that it's safer than a big chunk coming at you but a million little shards would be just as bad in your face or clothes or something no ? Cheers
Nah, not really, you can pick it up and rub it in your hands, it won't cut you. I'm not recommending it in your eyes of course but it shouldn't hurt your face.
Not so much designed, it's simply physics. Tempering glass results in surface compression and internal tension. Breach the boundary between them and you have a pile of tiny cubes all over the place.
The little cubes aren't going to kill you, big shards can and do, that's why safety glass is required in certain applications.
@@gregcorwin8316 I was unaware that tempering was a thing I thought that was just the name of the glass learn something everyday thank you
@@trevorjames5493 you're welcome. If you want to learn more, just do a search for how is tempered glass made. There are some good videos on youtube showing the process.
What’s some of this you sprayed ?
Alcohol
What a waste hey 😜
Tempered Glass? - Unless you Anneal it first ..Not happening.
Hi, great video... Is there a way to sand on smooth edges/corners of tempered glass??!
Hi and thanx! No I'm afraid you can not process tempered glass in any way onse it's benn tempered.. That beeing said you can try with some wet sandinpaper, might get a little better but you run the risk of shattering it.
Actually,you can arriss and flat polish edges on toughened glass with a belt sander using silicon carbide belts.
Generally speaking though,all edgework is completed before furnacing.
@@bigblock146 Correct.
What is this?
Do i apply pressure when i cut
Yes, apply pressure, not a lot tho
Yupp 👍🏻
So you can’t you cut tempered glass?
You can If you can clap with one hand.
That's right OJ👍
@@ricardoestrada9526 well, damn I can clap with one hand, but still doesn't help cut the glass lol
You can waterjet with abrasive cut it
Omg 3k ❤️❤️
👍👍
Sorry mate, finished cleaning up before I watched this, thats on you!
Good on you Leslie! 🤣
I dont get it.. it was all over the place... not enough details..
How do I cut tempered glass?
What tools do I use?
Whats the maximum thickness per tool?
What are the tool specs??
you should read some comments here, then ask the obvious question again...
Is the laminated glass you cut tempered glass?
No, if it was I wouldent be able to cut it, its 2 normal panes laminatet together👍🏻
All you did was break it
Oh My God! You haven't got an Arsenal fan there?
Yes we do ufortunately 😜 rest of us r Chelsea 👍
How to to drill holes on a tempered glass
Impossible I'm afraid
My bad I just watched your video again I just realized that tempered glass cannot be cut
you cold have dropped an affiliate link for a good cutter.
Dig the Demolitia hat
Anyone else here after scoring some glass and beating the crap out of it with a ball peen hammer trying unsuccessfully to cut it, only to find that it must be tempered glass?
Hey man good representation and I don't mean to be picky but I've cut enough glass in my day... so the end result is how you cut the glass, what I've learned in order to achieve that result is first you score it then you snap it then you have a cut piece of glass LOL when you scored it you said you cut it that is really not correct am I right? until it is another Separate Peace it is not cut again LOL but as I said overall good video thank you
You are right about the terminology my guy👍
Thanks for the comment and you'r positiv feedback! 🙂
In some places oh&s does not allow for the burning of laminated glass I don't recommend this way of doing it its to dangerous
Come on Rick, u can handle it 😜
Half of those techniques are also use for sheet metal.
This is laminated glass vs regular glass this is not tempered glass.
Hi Andrew, That's the point, it can't be done, after it comes out of the oven and have been tempered it's set in stone, can't cut it, drill it, sand it or anything. Have a good 1!
Well hell.
When we get our glass, right from the factory. It comes tempered.
We cut it up, in to smaller pieces.
To make show cases.
So there must be a way.
It's a trade secrete.
If you like. 👍
I'll explain it to you.
Hi Graham
It's not tempered when it comes from the factory, it's float glass the factorys deliver and manufactur, it has to be tempered in an spesoal oven after its cut to size, the process puts the outer surfaces of the glass into compression and the inner surface of the glass into tension, you cant cut it ones it's tempered it would defeat the purpose of tempering in the first place 👍
After we cut it.
Then we bevel the edges.
Then we assemble the show cases
You have to remove the bevels, if you want to cut it again.
The bevels are the spine.
Thanks.
G.
@@thisisbig-o
You can't cut it, with a hammer.
You have to walk, like a Egyptian.
Well I for one would like to see that. Spent half my life as a glazier, in the factory, on site, you name it and I have NEVER seen toughened/tempered glass cut. Are you sure you don't mean laminated?
If you are gentle and easy, you can grind tempered glass, or shape the edges with a grinder or dremel.
There is an unofficial rule-of-thumb that you can remove 1/2 the thickness of the glass from the edge of a tempered lite by grinding or sanding, however it's not recommended by the glass industry and you increase the potential risk for the glass spontaneously shattering in the future by doing so.
Is safety glass called tempered glass
Yes if is is tempered, but it could also be laminated
Well...as far as I've been able to determine...""THE" absolutely biggest difference...is basically, the QUALITY of the glass-cutting tool itself.
Because..when a person can put nearly all their body weight..into ""trying" to simply just make the score line..and STILL result in an incomplete or intermittent..or just...NOT be able to get the "CHEAP-ASS" cutting wheel, in the..cheap-ass glass-cutting tools, sold in..Wal-Marts.and
.MOST hardware stores.
Its WELL worth having to spend a bit more..and getting the RIGHT TOOL specifically FOR..cutting friggin GLASS. When you consider how much it can cost..in WASTING a LOT of glass, due to the obscenely POOR quality AND performance of said.."cheap-ass" glass cutters. I mean..Hell..I could just put a damn CARROT in a little box and throw a label on it that said, "Glass Cutter" and that friggin carrot..has about as good a chance as any CHEAP, so-called "glass-cutter", of...successfully.. consistently and reliably..CUTTING ant damn GLASS.
You cannot cut tempered glass at home... do not try!
you cannot cut tempered glass away from home either
@@gregcorwin8316 You can cut with a laser cutter
@@18T220 And you know that why?
I have visited both Germany and Italy on separate occasions as part of a glass manufacturer technology team to view glass cutting lasers, and while the technology for cutting annealed glass with a laser is well developed, laser technology for cutting either tempered or laminated is, at best, sketchy.
I have yet to witness a successful cut of tempered glass with a laser despite claims of success from some developers.
I have seen successful cutting of laminated glass with a laser but only when the laminated glass was very thin.
watching this and still don't know hot to cut tempered glass....
You can't Samantha, no one can, once tempered it impossible
@@thisisbig-o Aww, thank you
You never did show how to cut tempered
I had to watch a couple of times but it was clarified in the comments. Trumpeted vs laminated are 2 different types. You can cut regular & laminated. You cannot cut termpered.
Smile! You don't need to be that serious, it's just about tricks, not rocket science
You got it Joe 😜
Laminated glass is not tempered.
Thats right, watch till end 👍
@@thisisbig-o I was commenting on the title.
Safety glass and tempered glass are two different things tempered glass doesn't have a film inside so why did you say you tempered the in your listing
Both of them are safty glass, just two different ways of making them, one is tempered and one is laminated, these days a lot of glass is tempered snd laminated, they combine the two for optimal strenght
@@thisisbig-o yep, although I would argue that in most cases heat strengthened/laminated is better than tempered/laminated, but that's not how folks on several ASTM or ANSI committees see it. They generally prefer tempered/laminated (balcony railings or balustrades for examples), but I chalk that up with being less familiar with laminated in general.
Tempered glass can only be cut with Lazer
😂😂 its misleading normal glass isnt armored and shutterproof glass isnt armored glass so when you decide to cut armored glass please upload the clip.....armored glass explodes when you attempt to cut it unless a lazer is used thanks...for a chance to educate some adults....😅😅😅😅
You wrong mate, can't cut it with a lazer, only on Mission Impossible 😉
Great video thanks for sharing