A chain remains the best solution to transmit torque to the rear wheel. It offers less mechanical resistance as the pinion and shaft system and moreover, it allows the possibility to change gears which is not possible with the shaft /pinion system. When removing the pin of the pedal lever, I always undo the nut one or two turns and I hammer on the nut itself to loosen the pin. It avoids to damage the pin thread like it was badly done in the video.
Идея хорошая,но велик стал одноразовым,к ремонту не подлежит из-за того что кардан заверен, ещё один минус шпонку нельзя так забить,надо поставить хотя трубу когда забиваеш что бы не повредит подшипники среднего оса
there are 3 types of power transmission, chain, belt, shaft system. this is shaft system. you can see it in trucks when power transmit from engine (front) to tyres (rear). mostally used in trucks.
Great idea, but you have to be careful with shaft drive as they don't allow for snatch and you can get a nasty injury if this happens. There's a reason so many bikes stayed with chains.
He is an expert in shaft (🍌) drive especially in the nights. He does not use metal guard, but rubbered dotted safety baloon for those extra precautions. 🤣🤣🤣
That's called a driveshaft. My old cruiser motorcycle has a driveshaft sort of similar in design to that, but much heavier. It robs about 25% of the engine power, but lasts forever, since its gears are precision machined and fully enclosed and lubricated. Your homemade driveshaft for that bike won't last long, since the teeth aren't cut to mesh together, nor can you keep it running in oil. p.s. why do so many people wear flip flops in videos, even when working with metal/welding or riding bikes? I'm surprised you have any toes left.
You are talented,it is very difficult to develop drive shaft,but you make.but here to move with pedal is not easier,now it is better to instal motor here and make it electric Bic.otherwise this is hard to move,and not such beneficial as you think.
@@Teriyaada_Poya idk how people can hate someone so much that they start to live in their minds rent free I am not a political person but idk what was the need to mention rahul gandhi here?? Like why?
One needs a big heart and open mind to appreciate others good work. Such esteemed characteristics are embedded by the parents and teachers during one's childhood. Unfortunately many don't get it. 😒😒😒
@@Teriyaada_Poya i believe one needs an even greater heart to come to point out your mistakes and tell your weak points As the saying goes Sometimes you are kindest to people by being mean to them
Nothing was wrong with it with a nice chain, but it seems he wanted to make it less efficient and harder to pedal from an increased parasitic drag and wear the gear teeth faster, with the added benefit of pinching skin off his leg from the front "ring and pinion" as they mesh. Other than all that, it was a great idea.
Nice creative 👌
Very nice tricks❤
মাশাআল্লাহ নতুন আইডিয়া
Great video
बहोत ही सुन्दर प्रयोग था आपका,,,,देखकर अच्छा लगा
Poo kk loo
@@andreibaraviera6158 Phle likhna sikhlo school to kbhi gya Nhi
Wow!😯 awsome tecnuique😯
Great n innovative idea. U proved that chainless cycles can be made… hats off to u
Bahut idia
Lol its not his innovation. The first shaft (i.e. "chainless") bicycle was made more than 100 years ago.
The tri-cycle you used to ride daily till you reached the mature age of 45 is chainless. 🤣🤣🤣
I hope you aren’t serious!
😊 6:16 😊 6:16 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊 6:16 @@sipunbhokta135😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊 6:16 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊 6:16 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
Good idea👍👍👏👏👏👏
👍👍👍Good job
Wow super great
nice bike and idea sending full support itsrichie channel👍
ua-cam.com/channels/sO0_IHkCMzaFMe7T3mtZOg.html
@@mdsakibul9291 q
Nyc yar
Эта звездочка предназначена для цепи и не предназначена для передачи вращения с звёздочки на звёздочку. Поэтому она очень быстро выйдет из строя.
Эт смотря из чего она сделана.
Concordo e o eixo Cardan vai precisar estar sendo lubrificado sempre
Super 👌 idea
incredible upload INDIAN TECHNICAL BOY. I shattered the thumbs up on your video. Continue to keep up the quality work.
Totally Fantastic
Nice video
Good idea
Nice bro and growth of India 👍👍👍👌👌👌😊
Q chido así ya no c va a tragar mi pantalón ó los niños van a meter sus manos en la cadena...
It's Amazing
A chain remains the best solution to transmit torque to the rear wheel. It offers less mechanical resistance as the pinion and shaft system and moreover, it allows the possibility to change gears which is not possible with the shaft /pinion system. When removing the pin of the pedal lever, I always undo the nut one or two turns and I hammer on the nut itself to loosen the pin. It avoids to damage the pin thread like it was badly done in the video.
Youre trying to debate a Indian jit who is blindly arc welding on his grandpa's bike in the middle of the street
Q
Part ki ghisavat jayda hogi and parts ko opne kerte time wald ko katna bhi hoga and theeh ka khiswa bhi kafi jayda hoga or toque kam hi milega
Oooooooo
😅😅😊😅😅
Great 👏👏👏👏👏
Great idea 👏👏👏👏👏👏
Great work👍👍
What a creative idea 💡
Very good👍👍👦
Идея хорошая,но велик стал одноразовым,к ремонту не подлежит из-за того что кардан заверен, ещё один минус шпонку нельзя так забить,надо поставить хотя трубу когда забиваеш что бы не повредит подшипники среднего оса
Good done work
parabens pelo video o video ficou muto incrivel
Like your video
Wa bhaia kya trick hai
Boht vdia ji
I want to see the result after placing chain again in it with this shaft
What pros comes after both system applied on same cycle ?and is it successful
It would be better not to dismantle the cycle.
You can take chain from him and work it on your personal shaft. ☺
@@Teriyaada_Poya bruh i didn't understand what you want to say
@@Teriyaada_Poya😂😂😂😂
Nice bhayyah great work 👍
Sé mira muy buenas la idea de eliminar las cadenas y empezar a tener menos dolor de cabeza cambiando ah su idea genial 👍👍👍👍
Wow nice Bro
there are 3 types of power transmission, chain, belt, shaft system.
this is shaft system.
you can see it in trucks when power transmit from engine (front) to tyres (rear).
mostally used in trucks.
Yes to increase torque more ❤️❤️
There are also some very rare bikes that used gears to transmit power
Excellent 👍👍👍🌹🙏🌹👍👍👍
There will be power delivery gap everytime the gear tooth moves away
nice video
Great idea, but you have to be careful with shaft drive as they don't allow for snatch and you can get a nasty injury if this happens. There's a reason so many bikes stayed with chains.
હ
Using iron gard
Just use a metal guard
@@VladimirPutine that will make no difference. Snatch will cause a highside or lowside crash. That's why so few motorbike use them.
He is an expert in shaft (🍌) drive especially in the nights.
He does not use metal guard, but rubbered dotted safety baloon for those extra precautions.
🤣🤣🤣
Good👍
Good idea but will need more strength and stamina to cycle.
Very good your work
That's called a driveshaft. My old cruiser motorcycle has a driveshaft sort of similar in design to that, but much heavier. It robs about 25% of the engine power, but lasts forever, since its gears are precision machined and fully enclosed and lubricated. Your homemade driveshaft for that bike won't last long, since the teeth aren't cut to mesh together, nor can you keep it running in oil. p.s. why do so many people wear flip flops in videos, even when working with metal/welding or riding bikes? I'm surprised you have any toes left.
typical Indian thing..they wear tanks and shirts and flipflops while working..only welding glasses.😂
We are built different
@@AdolfRizzler41 lol what?
@@AmericanThunder it is due to the heat
Boot dont work here
Its sweaty, so flip flop are the best
Super cool and awesome 👍👍👍👍
How the freewheel can be serviced in case of repair?
Right
Easy replace the bike 😭
@@achwal
Same method of first time
Cut nd replaced 🤣🤣🤣
Great job sir
It's hard to driver, that fellow is putting much more energy to padel it
Dunhill LA Light
Lucky Strike
Tourqe is incrsed.
No its not harda
It is not hard but easy and will last a long time
Red pocket and get up to 1 NEIRO :⬇️
BPRBD3TR4V
Nice 👍 keep up
You are talented,it is very difficult to develop drive shaft,but you make.but here to move with pedal is not easier,now it is better to instal motor here and make it electric
Bic.otherwise this is hard to move,and not such beneficial as you think.
Good job
Jay hind Jay Bharat
wow,,It's wonderful job
после удара молотком по резьбе я понял какой это механик.
Nice idea
The production quality of this is absolutely through the roof! Amazing!! Only legends will like this amazing video🥰
ஒகே சூப்பர் அருமையான பதிவு
@@sivamanisivamani3750 গগগগগগগগঘগঘগগঘগগগগগগঘগঘগগ
😂😂😂 %
Thus you have declared that you are a legend.
Even Rahul gandhi will feel pity for the comment.
😇😇😇
@@Teriyaada_Poya idk how people can hate someone so much that they start to live in their minds rent free
I am not a political person but idk what was the need to mention rahul gandhi here?? Like why?
Good work
The speed will be doubled whenever the central gear larged
Very amazing beautiful ❤❤❤🎉🎉
I think it's a great talent which should not be ignored.
5j6
Good 👏👏
अगर एक्सल की गोली कट गई तो साइकल ही काटनी पड़े गी भाई जी ,👎👎👎👎
Very good
You cannot disassemble it to repair the bearings.
Так и шестерни изнашиваются.
Здесь нужна система со стопорными кольцами удерживающими сменные шестерни как на планетарных втулках Shimano.
Good man,
,,,,👌👌👌
You have compromised the structural integrity of the bicycle by cutting main support arm... Also your welding skills needs huge improvement dude..
But it won't matter much, as the long rod is welded with both sides,
Right
One needs a big heart and open mind to appreciate others good work. Such esteemed characteristics are embedded by the parents and teachers during one's childhood. Unfortunately many don't get it. 😒😒😒
My channel
@@Teriyaada_Poya i believe one needs an even greater heart to come to point out your mistakes and tell your weak points
As the saying goes
Sometimes you are kindest to people by being mean to them
So nice. Keep it up.
I have thought same but it is danger if u pedal back in a ride u will be thrown in an air, chains won't play this role
Exactly u can't move backward in chains on pedaling but in his case its dangerous 😅😅
Super 👍👍👍👍 super 😎
Good idea but once small roundball brok its hard to change again
आप बहुत अच्छे वीडियो बनाते हो
I think it will not be as smooth as chain driving ! However thanks for a novel concept !
Nice 🙂 idea 💡
What
It has reverse gear also
Oho wow wery good अतिउत्तम
What was wrong with the way it was before all of that?
Love the part where he's hammering the cotter pin out with a hammer.
Nothing was wrong with it with a nice chain, but it seems he wanted to make it less efficient and harder to pedal from an increased parasitic drag and wear the gear teeth faster, with the added benefit of pinching skin off his leg from the front "ring and pinion" as they mesh. Other than all that, it was a great idea.
@@AmericanThunder 🤣.. you are indeed too funny though your points are very valid
सुंदर प्रस्तुति
Very good..
Bahut badhiya
Great idia
Beautiful Idea. Intelligently made . Well Done.
Another's type of bicycle innovation.... great,
Good idea
Beautiful 👍👌
Good👌👍
Truck wala system 😂😂👌 , nice bro 🇮🇳
Great job
Very very nice
Good idea ❤
Very nice
6:16 How wonderful! I really like your creative videos
गजब यार 👌👌
Nicee 🙂
नाइस सर 👍
nice idea
Great creations with bicycle chains
Super bro
👌👌👌
Good. Job