Thanks alot for show how to imput bind fraze in betaflight and the website where is transformed in program language. I succeeded to bind my new mobula7 1s ELRS.
There were no problems with sound recording on the DVR recorder glasses? I can't understand the reason I have only one noise and interference. I didn't find a regular microphone on VTX. What is it written through?
Are you talking about a sort of buzz on the sounds recording of the DVR? If so, yes I get that - obviously I mute it when editing and I don't fly with sound. I'm not sure where it's coming from, there's probably something that hasn't been considered and so there's a buzz instead of quiet
These particular ones are built into the FC, so can't be messed with (and in fact there firmware is embedded within Betaflight) There are some CRSF to PWM boards available, but I see Matek have a ELRS rx out with 5 PWM channels available - so you can at least fly a basic plane with it.
@@CurryKitten Yes, I recently bought that Matek decoder PCB and fitted a TBS Nano Rx on it...Works a treat and it's got a main Lipo pad for telemetry..I meant have they standardised the pinouts of these new ELRS RXs, basically they are wiring up a UART port (4 pins)..? 🤔🤔😳
Hey brother... I want to use 3 blades props but I don't know the size 😫 the one that comes with it are gemfan 2020......2023 3 blades fit in the meteor 85 ? 😊 🙏 😊 thanks
Excellent review! ... but aren't you aware that those tiny flying thingies with the safety thingies around the spinny thingies are meant for the inside? Keep up the good work!
Yeah - you can fly these around the house with some throttle scaling, but the little 66mm whoops are much better inside the house... and I really do suffer inside from very bad 5.8 noise everywhere, so I like to get outside amongst the trees with these little guys
I don't know - I don't think it crossed my mind to try. What I would do instead if you really wanted to cruise is use 2s and put a throttle limit on so then you'd have a nice cruising docile platform
Not too bad of late - I'm on my exercise bike most days continuing to build the muscles around it, and walking these days there's some pain, but it's duller - and manageable. Before it was very sharp and painful every step - so a big improvement from that
Great review in the real world...where things just blow away in the wind...and crash....
Great to see ELRS is doing perfect on a little quad. I'm looking forward to putting elrs on mob6 and Tina Whoop at Christmas.
Tina the Tiny Whoop!
Yes - so so much better than crappy SPI d8 rx's, I put one (albeit an ELRS enabled FC) in a 65mm quad... never thought about range issues again!
Thanks alot for show how to imput bind fraze in betaflight and the website where is transformed in program language. I succeeded to bind my new mobula7 1s ELRS.
No worries - I haven't tried it on the actual release version of 4.3, but I presume it's all the same
Excellent video as always
Thank you! Cheers!
Pretty fantastic flying, Wayne! Great review! 😃
Pretty nice little quad! I really liked it!
Anyway, stay safe there with your family! 🖖😊
CHeers MC - I had fun with it !
You should make a review on the flywoo cinerace20!!
If I get the opportunity to do so, I'd be glad to !
There were no problems with sound recording on the DVR recorder glasses? I can't understand the reason I have only one noise and interference. I didn't find a regular microphone on VTX. What is it written through?
Are you talking about a sort of buzz on the sounds recording of the DVR? If so, yes I get that - obviously I mute it when editing and I don't fly with sound. I'm not sure where it's coming from, there's probably something that hasn't been considered and so there's a buzz instead of quiet
Good job m8....those tiny ELRS RXs are great...Can you solder them to a decoder board for servo outputs?🤔🤔
These particular ones are built into the FC, so can't be messed with (and in fact there firmware is embedded within Betaflight) There are some CRSF to PWM boards available, but I see Matek have a ELRS rx out with 5 PWM channels available - so you can at least fly a basic plane with it.
@@CurryKitten Yes, I recently bought that Matek decoder PCB and fitted a TBS Nano Rx on it...Works a treat and it's got a main Lipo pad for telemetry..I meant have they standardised the pinouts of these new ELRS RXs, basically they are wiring up a UART port (4 pins)..?
🤔🤔😳
Hey brother... I want to use 3 blades props but I don't know the size 😫 the one that comes with it are gemfan 2020......2023 3 blades fit in the meteor 85 ? 😊 🙏 😊 thanks
Joshua Bardwell made a video about Actual and Betaflight rates and how to set it up
Ah - I will have to have a look. I normally don't like to run on any pre-release code, but you don't get an option as far as ELRS SPI goes.
good stuff
You made a comment :)
Excellent review!
... but aren't you aware that those tiny flying thingies with the safety thingies around the spinny thingies are meant for the inside?
Keep up the good work!
85mm is too big for flying at home :)) Spots like this forest are fun with this type of quad. Great review, indeed!
Yeah - you can fly these around the house with some throttle scaling, but the little 66mm whoops are much better inside the house... and I really do suffer inside from very bad 5.8 noise everywhere, so I like to get outside amongst the trees with these little guys
Hi. I don't have elrs radio, can i put frsky receiver in the betafpv 85?
Yeah - it's possible, there's an SBUS pad on the FC
@@CurryKitten Thanks
Hii
Can it work on 1s (for cruising)
Thanks
I don't know - I don't think it crossed my mind to try. What I would do instead if you really wanted to cruise is use 2s and put a throttle limit on so then you'd have a nice cruising docile platform
Ok thanks 👍
hi, The leg is not getting better ?
Not too bad of late - I'm on my exercise bike most days continuing to build the muscles around it, and walking these days there's some pain, but it's duller - and manageable. Before it was very sharp and painful every step - so a big improvement from that
@@CurryKitten This is good news and I'm very happy for you.