How to Remove Front Bumper | Audi S5 Sportback B9 |

Поділитися
Вставка
  • Опубліковано 26 гру 2024

КОМЕНТАРІ • 46

  • @rtansy99
    @rtansy99 Рік тому +1

    Just seeing this. Where did you get the grill?
    I have the same make/model/color and looking to get the same one you have.
    Thanks,
    Ryan

  • @giovannienjoyyourlife6800
    @giovannienjoyyourlife6800 3 роки тому +2

    Nice job and nice grill.👍👍

  • @georgejr.heredia8444
    @georgejr.heredia8444 3 роки тому

    I have a 2020 A5 sportback, just swapping out grills today. I have the bumber off already, just having a hard time removing the bottom bar that sits on the inside of the grill. The clips are nightmare. Any suggestions?

  • @Cabezon345
    @Cabezon345 2 місяці тому

    How you got the crash bar black? Paint, powder coat, wrap or something else

    • @bollingmore1
      @bollingmore1 2 місяці тому

      I did one a while ago with some black aerosol

  • @pgmallon
    @pgmallon Рік тому

    Where did you find the grill with the quattro letters?

  • @r.jsamuel6337
    @r.jsamuel6337 6 місяців тому

    Where is that grill from?

  • @Its_ELHJ
    @Its_ELHJ 3 роки тому +1

    Hey bro! Where did you get your RS style grill for your S5? How was the install? Thinking of doing that exact mod!

    • @chthan3o3
      @chthan3o3  3 роки тому +3

      BK Motorsport who no longer carries them. I’d recommend CARBNLAB if you are looking for a grille

    • @Its_ELHJ
      @Its_ELHJ 3 роки тому +1

      @@chthan3o3 oh okay! Thanks for the info bro!

  • @zoidaguz
    @zoidaguz 3 роки тому

    Do you need to modified the crash bar for the sensor to fit? Mine is a prestige. Don’t know if there’s any different. Thx in adv!

    • @chthan3o3
      @chthan3o3  3 роки тому +1

      I had to remove the foam from the crash bar along with notching/widening some existing holes using a drill and unibit to make room for the sensors.

  • @davidmels
    @davidmels 2 роки тому

    Hi mate. On the crash bar inside the foam it has a clear tube running through it with sensor at each end. Any ideas what it's for and what I should do with it. Thanks

    • @chthan3o3
      @chthan3o3  2 роки тому

      When I installed the grille, the bumper/new grille did not fit without removing it. Depending on the type of new grille you use, you may need to remove it

  • @yufanchen6072
    @yufanchen6072 2 роки тому

    Is there a place to buy a replacement screw for the t30 screw on the inside? I lost one while removing my bumper 😭

  • @mdc160
    @mdc160 3 роки тому

    Which honeycomb grille did u go with? Can you paste the link please? Also did u have center camera and sensors for parking on your car? Did u have to make modifications to grille?

    • @chthan3o3
      @chthan3o3  3 роки тому +1

      I purchased mine from BK Motorsport awhile ago but they stopped selling the grilles.
      Mine is the Premium Plus trim so I do not have a camera. I did have to modify (drill larger holes) the crash bar to make it fit with the parking sensors. This was an issue with the older grilles. Not sure if its been fixed with the newer ones on eBay.

  • @daviddubin6560
    @daviddubin6560 3 роки тому

    Are there wires that I have to watch out for for the parking sensors on the bumper not the grille?

    • @chthan3o3
      @chthan3o3  3 роки тому +1

      Plug/wire on the driver side of lower bumper only

  • @andydutchy
    @andydutchy 3 роки тому

    Very comprehensive. Thank you.

  • @Matt-iu1iv
    @Matt-iu1iv 2 місяці тому

    thank you good video

  • @WizardWandd1
    @WizardWandd1 2 роки тому

    A walkaround of the car please?

  • @mohammedal-ashwal7795
    @mohammedal-ashwal7795 Рік тому

    Very helpful, cheers buddy

  • @loveablehk
    @loveablehk 3 роки тому

    Did you paint your crash bar?

  • @MisterrFrancis
    @MisterrFrancis 3 роки тому

    did you change the grill yourself?

    • @chthan3o3
      @chthan3o3  3 роки тому

      Yes

    • @birddawg1171
      @birddawg1171 3 роки тому

      Are those Vossen Rims? How do you like?

    • @chthan3o3
      @chthan3o3  3 роки тому

      Vorsteiner, I like it but noticing more and more ppl rocking it :(

  • @martincurobert109
    @martincurobert109 3 роки тому

    Did you have any issues with parking sensors? 🤙🏽

    • @chthan3o3
      @chthan3o3  3 роки тому +1

      Not really, only when it rains sometimes

    • @martincurobert109
      @martincurobert109 3 роки тому +1

      @@chthan3o3 this mod is not for UK guys 😂

  • @ismarperez8030
    @ismarperez8030 Рік тому

    THANKS BRO.... 👋

  • @zlkzak
    @zlkzak 2 роки тому

    I'm having trouble removing the black clip at the 3.25 mark..
    Having a nightmare lol

    • @chthan3o3
      @chthan3o3  2 роки тому

      Use a long flathead and use something to hammer the handle of the flathead

  • @birddawg1171
    @birddawg1171 3 роки тому

    My grill is on the way!

    • @chthan3o3
      @chthan3o3  3 роки тому +1

      Good luck, it was a pain to install lol

    • @birddawg1171
      @birddawg1171 3 роки тому

      @@chthan3o3 yes it was!

    • @newhan4914
      @newhan4914 3 роки тому

      It looks like you have the front camera. Did you get the V2 3D camera mount and how is the view compare to stock?

    • @chthan3o3
      @chthan3o3  3 роки тому +1

      My trim is Premium Plus so I do not have the front camera.

  • @infra1
    @infra1 2 роки тому

    7:55 .... uggghhh I hope my garage doesn't do this! Like, you know it might come down... throw down a towel or blanket!

    • @chthan3o3
      @chthan3o3  2 роки тому

      I have taken off the front bumper numerous times and set it down gently. First time it fell like that lol. Just being clumsy I guess :)

  • @kidreflex1
    @kidreflex1 3 роки тому +1

    Noiceee

  • @ronradney1824
    @ronradney1824 3 роки тому

    🇻🇮

  • @marcoalex361
    @marcoalex361 2 роки тому

    not very careful with that , ill never leave a car on hands , droping the bumper and drag it on the concrete floor … wow.