Honda DIO PROTOTYPE Exhaust Testing 72cc AF16
Вставка
- Опубліковано 7 лют 2025
- #MOPBOYZ GEAR : www.mopboyz.com/
S23 PIPE NOW AVAILABLE!! :scooterswapsho...
NEED SCOOTER PARTS? - CLICK HERE : scooterswapsho...
Back to it on the 72cc polini honda elite build. Today we test out a new prototype exhaust pipe from S23 against my arrow exhaust. We rip the 72cc corsa around a bit and get our first impressions on this new pipe!
@Scooterswapshop channel : / scooterswapshop
PREVIOUS VIDS: this MADE my HONDA ELITE way FASTER! New Pipe on the 2 Stroke 50cc Scooter!
• this MADE my HONDA ELI...
--- it RUNS! Honda Elite 50cc 2 stroke Wheelie scooter build
• it RUNS! Honda Elite 5...
RIDEOUT : INSANE TWIN ENGINE 2 Stroke Scooter | 100cc Zuma
• INSANE TWIN ENGINE 2 S...
FAST 2 Stroke Scooters take over the City!
• FAST 2 Stroke Scooters...
Chucks FAST 120cc Honda Elite Stroker
• Chucks FAST 120cc Hond...
More on the stroker Scooters:
120cc Stroker Honda Elite is SO FAST! First Rips! 2 stroke
• 120cc Stroker Honda El...
doing 90MPH+ on a MOPED!! 120cc STROKER HONDA ELITE speed runs:
• 93MPH on a SCOOTER! To...
#2stroke #hondaelite #moped #120cc #stroker #fast #honda #short #dio #dd50 #stuntscooter #gy6 #150cc #moped #wheelies
I love being at a red lite and someone looks at you like (oh a scooter bet that’s slow)but then you pop up the front tire and leave them in the dust😂
Thanks buddy I appreciate it!
Can’t wait till these drop!
Have u ever did a straight pipe vs a expansion chamber? If so what one works better. I have a 100 cc two stroke and when I went with straight pipe no muffler I for crazy low end and lost a lil top speed but I'm trying to figure out if expanded chambers are worth me buying
@@joneserupinsmoke9161 two strokes need expansion chambers to work properly. They use the expansion of the exhaust gases aid in pulling air and fuel into the cylinder
You should watch some videos on how two strokes work it will help you understand why they’re needed
@@Scooterswapshop thanks bro I but I Watched a few and how they send the unused fuels back and some shit abt the sound waves but Im just trying to see if anyone did that test yet. But yea man THANKS again boss man.
@@Scooterswapshop yo I am thinking abt getting a mopped head my self I watched some clips some of these cats to got em going damn u we as fast as or so dirt bikes lol
Looks like it’s a windjammer replica. I run 4.5gram weights and black (stiffest) clutch spring and red contra (stiffest) and it’s a ripper without any porting. Glad Brandon did this, a lot cheaper than my jammer!
I know we are 2 years later, if you see this I’d like to pick your brain for just 5 minutes if possible
All right we’re back to the elite 👍🏽, think a red contra would help wit the start off. Pipe sounds Nice bro. Love how the windjammer pulls at the top too, I’ll have to grab one these as well. It does look a lil shorter, not sticking out past tire but looks super close to the engine shroud
. 🧐
Congrats on the channel growth, going all in! From the Chinese scooters to now, I really enjoy how you put vids together, it’s like I’m there witcha bro! keep up the good work Mopboyz4Life!
Sounds like you need to stiffen up the clutch springs just a little to get rid of the shifting moment as we call it because it’s way to noticeable.
it should get you autowheelying from standstill.
Don’t go any lighter on the rollers
Aye! More on the purple elite S! just watching this puts a smile on my face knowing I have the same identical one! SGANG!
Nothing like coming home after a ride on the china scooter and watch some mopboys
yessir!!
I wish we all got the same support from SSS as you do!
Great video as always I got your sticker hookup it definitely seems like the pipe is doing it's job very sweet waving my hand from down here in Florida
Yeah I can definitely hear the rollers ringing like a bell in the variator with headphones
Still rocking the baby shoe 🤘🤙🏌💯😇 u nailed it on that thought! Smart man right here
definitely gonna have to get that s23
Love the new into
i love that lil luffy figure on the plate i gotta find me one of those now ha
Definitely could tell when it hits power band now!
Yeeeeew
Sounds good af
Why would there be oil in the exhaust? Is that a characteristic of two-strokes?
S23 windjammer? I see you SSS, sounds good too
really like your vids but man you should get a typhoon
It sounds better in my opinion
Half scorpion, half arrow, but stronger than both.
Really nice! We've got some Kymco DJ's, the engines seem similar. Are they?
LETS GOOO!!
It sounds good
That arrow pipe look soo good 🙌🏾 did you get my last comment about them 3D printed frame sliders I wanted to send you a pair to try!
didnt see it bro but sounds useful on the wheelie bike for sure haha!
@@MOPBOYZ I figured you didn’t with all the comments! You good ! I want to definitely send you some to test completely free! Ima try to dm you my # so we can make that happen.!
I’m kinda new to the scooter game, but what are frame sliders and what do they do?
@@sdugasjr Basically minimize the chances of ruining your bike farrings and frame body! I’m case of a crash 💥 they are designed to take the impact instead of every else because they stick further out on the bike! I just recently uploaded a video and my prototype frame sliders are in my content 💯 hope that helped!
big fan
Is the silencer serviceable? Like can you re pack it? I ask bc I recently bought one used and mine is deafening loud. Like the silencer isn’t working at all.
Nice video
Nice Honda elite nice color, nice sound! Where can I order that prototype exhaust for my Honda dio 90cc?
scooterswapshop.com/products/s23-race-pipe?ref=MOPBOYZ
How is the throttle response on that bike? I have a dio with an almost identical setup except im running the arrow and a pwk 26mm. Rips all the way up to half throttle but after that just bogs from 1/2 to wide open throttle and cant seem to tune it correctly to get that too speed out of it. Thanks 👍
Where can i get one of that?
hi how are you? I am a follower of yours, I hope you are well. I would like to know if you can guide me about an elite lx 50cc, I made it turn on but it doesn't keep the minimum, what problem could it be?
Put the silencer of the arrow to the new exhaust
Can u tell me what arrow model this muffler? Need to order one
Nice let’s run it tho its lookin like ima have to get a new pipe soon 🤣
Me encanta este modelo está muy bonita😉👏👏👏👏
How would you compare to pg?
I have one of those motorcycles in the garage, where did you get the exhaust?
link in description for exhaust
Do these exhausts fit in Honda X8R? and would they be good for 72cc?
Yes it's stock officer
Yall need piagio zips 80cc the best
hi, dont you know if i can fit exhaust from af16 on af15 honda lead? thx
S23 has a deeper sound,sounds better than Arrow
I have a 100cc ram quad how much hp gain if put pipe on? It’s standard pipe atm but have moped I want take pipe off it as want better pipe for that
4.5 gram rollers standered carb though I am thinking doing manifold cheap taking bit off with porting bits putting tube and then it on bigger carb what you’d think
What crank are you running?
stock
The new s23 shit is legit…The spree s23 pipe is nasty…
Are there any geared mopeds like derbis in america?
What spark plug are you using? My tach freaked out if I didn't run a resistor plug.
b8hs, fixed it now, it was a faulty tach, it wouldnt read anything just stuck on frozen
are there any gileras in america
So want one of them license plate screw dudes would love to know where to get me one
Yoo I need to know where to get after market parts for a Honda spree I would live to build it to make it do wheelies plz help me
they really don’t make much aftermarket for those
Dang 12k on a stock crank! A real ripper 🔥
thoughts on Derbi Senda?
never messed with one
@@MOPBOYZ damn, i suggest trying them sometime. get like 72cc with a powerpipe, boom 60 mp/h
@@Masairasink they’re not easy to get in america
@@MOPBOYZ oh really? damn, i thought they were sold there
What cc that pipe is for?
72CC to probably mini stroke
What for exhaust and whats ghe price you buy it
this is just a prototype there not for sale yet, check www.scooterswapshop.com for the release.
@@MOPBOYZ thanks mopboys
Круто 💪👍
Only ogs know when he was only doing gy6 videos 🤦🏽♂️
What size is that socket for the clutch to take the contra off
38mm
You have stock crank in your purp elite?
yessir
Did you have a little oil coming out of your arrow pipe ?
Or gilera runner
how do you know when to lighten up rollers?
RPM's acceleration and topspeed and just testing whats good on your current setup as every scoot is different
@@pmsl okok gotcha tnx
you should get a yamaha slider
if they were in america
When rc1 video
posted 2 on the channel already bro’s go check em out
@@MOPBOYZ I see them just wondering you doing any more
FYI Jayaco rollers are the worst there pretty much as bad as prima rollers
Stage 23
buy an ddl tuning exhaust
sir im a huge fan of yours can i get some of your 90cc cylinder block of a dio af2 can juat for a cristmas present from philippines thanks sir and more power
yes dude you can actually just have all my scooters & parts
Бэха стволина ! На этом все
GPS PLEASE 🥺
next time !
waaauw
I bet those neighbor are so piss with that noise lol
Lemme buy that aero pipe
for sale on scooterswapshop
Lmk if u wanna sell your bike
everythings for sale for the right price
日本人も見てます
🌹
Them belts look way too large and I hate to to say to it but sss talks alot of smack about buying China parts to have their own brand of Chinese parts
We don't have a single part produced in china. Infact, our filters, and most our s23 branded stuff is made in the same factory that does parts for s6, polini and malossi. Proof is in the pudding, we make items to our own spec. Set out s23 filter next to a s6, the only difference is the name, and ours comes with more pieces for less money, in a nicer package :)
@@brandon-ix7oo so you Are saying that s23 parts are made in Italy?
@@runningbear211 nope, Taiwan, polini carbs made in Taiwan, s6 filters Taiwan, polini jets, Taiwan. Polini cranks, pistons, bores, are made in Italy, the smaller items, just like our s23 are made in Taiwan. The two last pipes we had made in Italy, for dio, by 2fast and polini all cracked. So we have them made in Taiwan, as they’re stronger for USA streets. Our carbs were coming out with will be same spec as polini, made in the same factory by the same people with a few upgraded tweaks for less money. Not only are we making the same things, but we’re making them better for less money. Cranks, bores, pistons, always Italy..
We don’t have to prove this brand, it’s already out there. Over 1000 items have left our shop so far not one quality issue everyone’s blown away with the quality.
You’re going to see polini and malossi belts go to $45-55 in 2022, s23 will work the same and it will be $25. We’re cutting out one more companies overhead between the maker and retailer, saving the customers money.
you sound a tad lean
Nice videos man, but damn scooters are ugly in the us. back in Eu they are way cooler.
not a big market for scooters here
you have a failure bro, the tracks on the torcdriver pulley need to be made even, take a boron machine, make them even and it will be even better. (used google translator) and you need red spring
No one called a cop? 😂
Lol your crank hates you
dude im sayin
It is not a dio, it's a tact.
lol. dio is the style of engine, its not a tact or a dio, its an elite s
@@MOPBOYZ Ok! I am from Russia, and we have no such scooters in the region. Just this looks like a Tact . I have Honda Tact (AERO) AB07E 1983 year and Honda Dio AF27 1994 year. What country are you from? The video is very interesting, I also like to repair scooters and engage in tuning in the measure of opportunity. Sorry for inaccuracies, I use the translator program.
🔥💪👍🇷🇺😉 Краснодар
🤣🤣🤣
To much rpm NO drive.
Sounds absolutely awful, somone down my street has the same thing
lol
wtf that honda is ugly 🤨 cuz here in the netherland we had the dj kymco y50 its look kinda the same as the honda model but the dj kymco y50 is more beautiful looking ua-cam.com/video/M1t_nNF2gv0/v-deo.html