#116
Вставка
- Опубліковано 6 чер 2023
- If you would like to purchase any demo please email me at sweetsnsprinkles7@gmail.com with your address and I will let you know the cost plus priority shipping.
Inspiration Video: • Resin Art GEMSTONE Eff...
Would you like a tour of my new resin room with poured resin counters? Click here: • #5 Full Tour Of My Res...
Click here for an easy quick way to clean your wet resin containers: • #13 How To Clean Your ...
Resin: amzn.to/3oLLotv
If you will be shopping on Temu - Please consider using my affiliate link here:
Temu Affiliate Link : temu.to/k/userFvCGhWawjG7
UV Light: www.temu.com/goods.html?_bg_f...
Mold: www.temu.com/oval-pendant-res...
Mold: amzn.to/3IUHPYJ
99% Alcohol: amzn.to/3Z83cve
Heat Gun: amzn.to/3n6j9ol
Large Disposable Mixing Cups: amzn.to/3TuByqW
Small Disposable Mixing Cups: amzn.to/3A2QCTy
Silicone Tool: amzn.to/3orcB46
Craft Knife: amzn.to/3KcLpOW
Deburring Tool: amzn.to/3lBzAs8
This is a cool technique & very pretty. I find with the mica powder if I pat it on instead of brush I can get more powder on the item. You'll get this Michelle. 👍
They are all pretty, but my favourites are those last 2 blue ones, they are beautiful. As for the rounded ones, I'd colour a black pupil in and use them as eyes. As someone else mentioned, it makes a big difference if you really burnish the powder on. I hope you will do more, as I'm positive you will make some stunners. Thank you for sharing x
More coming soon!
Love watching you try different things
Just love the opal pendant!
I tell ya if you do a tap tap and get all that extra powder off your brush and applicators, they will turn out better for ya. there will be just enough left on them to work.
Thanks!
I noticed Daniel almost filled his molds with the clear and cured then started doing the layers very thinly. Love your blue teardrops.
I tried that on an earlier video and it didn’t work for me 🤔
@@glitznglitterbymichelle1likewise.
Thanks for sharing your video, I enjoy watching experiment creations, I just ordered some jewellery making stuff from temu so this video is helpful, I watch Daniel too ❤
Cool one coming out soon! You’ll love it! Thanks for watching 😊
You can also use gel polishes with SFX that mimic opal, pearlescent and other SFX designs to suit then pour resin over them. You can even mix the gel polish in to the uv resin as long as you’re not using a greater ratio than one third gel polish to two thirds resin.
I don't know what SFX is???
Great job
New subscriber. Thank you for experimenting. The final 2 were super pretty. Thank you! 🩵
I have a theory that uv resin is very similar to gel nail polishes. I do know quite a bit about gel polishes and nail powders. I think I want to try using powders with no-wipe gel nail topcoat.(All the powders in nail art do best with the no-wipe topcoat. They just can be burnished right in) the powders also seem to work well with UV resins. Your opal is stunning.❤ I would recommend a more shallow initial clear layer, and perhaps the addition of a very few small mylar flakes. The iridescent ones.
Thanks!
I have made quite a few of these, here are a couple tips. Work in small batches, I do mine one at a time, work the resin all the way around, up to the top and cure. Do this with each layer. Also, keep your powder, only on the resin.
Thank you!!! 😊
I use similar techniques to make Moonstone and labradorite types of effects. You can totally use the deeper mold you just need to put more UV resin and Fila about three-quarters full before you furnish your first layer of powder then pour one more thin layer and repeat if necessary. I fill the entire mold up to where the UV resin just starts to ride along the top edge of the mold and then cure completely. I then remove them and add only a small thin layer of color that way the entire front of the cabochon is clear and you don't see the layers as much. This also keeps my colors from bleaching Down Under the mold onto the front side of my cabochon. I use a piece of putty tack to rest my finished piece on and putting the back color oh, you only need a small amount. You really only want to burnish the powder on the back 10% of the cabochon, the color will radiates throughout the entire piece and is actually very beautiful in these deeper rounded pieces.
Do you make videos!? I’d love to see it! 😃
Thanks!
@@ritasnow455 Thank you so much Rita! ❤️
Pretty! The drops are good. Maybe try to put in a setting?
Yes I’m definitely going to play around with more jewelry for sure 😃
If you used black on the back i bet you can make it look like labradorite. ❤
What about paint the powder on the mould but also mix it into the resin?
Good idea!
Michelle please help. I'm using uv resin on an area in my mold & it wicks away & pools in the middle. How can I make it spread?
You’re going to have to add more resin so that doesn’t happen
So perhaps I have too much dye & not enough resin?
It’s not too much dye as long as it’s curing
Watch Daniel’s approach again Michelle. It’s ok. I like the last two the best.
I liked your video but the music is too much and distracting
Yes, I was still learning back then, I think I got it now. Thanks for watching!
@@glitznglitterbymichelle1 thank you I'm watching your UA-cam video where you are using the UV resin and the cats eye nail polish. I'm so excited I ordered the cats eye nail polish today. I appreciate you and your UA-cam videos. Happy Easter
@@glitznglitterbymichelle1 ❤️