Very entertaining video. Engine test stand looks solid as a rock, and the engine is running really smooth. Always glad to see a cameo appearance by Ms. Daisy too.
It's a fantastic day when you get to watch a brand new video with this n that garage!!!!We wait for the video all week long!!!!Thank you for the enjoyment!!!!!Have a blessed day!!!!!?🤓🙏
You should call the Dodge, Red Dog! It's been dogging you every step it away 😂 your run stand looks really nice in red and your engine build turned out really well. Through the termination and tenacity you gut er done 👍 another great video Chad ✌️🇺🇲
“Always do the stuff you like first. If you wake up dead tomorrow morning, you will have done stuff you didn’t like and didn’t do the stuff you did like. So, always do the stuff you like first.”- This N That Garage - That’s one worth writing down.
I don't know how many times I sat as a kid watching my Dad rebuild engines, homing was always fun to watch, that carberator mercy sakes good thing she didn't blow.. 👍👍👍
On our Sea Scout boat, we got a Chrysler 318 marine with a Carter 4-bubble. That salt cleans off the carb using CLR calcium, lime and rust remover. Swab it on liberally with q-tips and it takes it right off and stays off until the next time you go driving in the salt.
Well Dangggg feller !!! Matching sparkplug wires with that "High Plains Drifter" Red Engine helm ! She's a Beauty! That's some uptown fabrication right-char. Before you revealed to us the Rad cap incident I stopped the tape and slow mo'ed it and damn Chad,, you were damn lucky. That cap was moving !! Woulda have seriously messed you up, thank heavens you're ok. You wouldn't believe how anxious we get watching waiting for that engine to bust off, it's thrilling as hell. Another fine video from Chad.. He's not as smooth as Tennessee Whiskey, But he's as warm as a glass of Brandy 👍 Excellent content.
One of my favorite tube channels. I enjoy your down and dirty yet methodical approach to automotive mechanics. Looking forward to the next episode(s).👍
Holy bajesus I laughed waaayyy to hard when you dodged that radiator cap! Whatever you do don’t give up UA-cam! You’ve got a gift sir, and it’s entertaining us good ole boys !
thank u sir for your time making this video and bringing back some good memories. early 90s we had drag racing with a class called bone stock, your 350 could be bord has big as u wanted to go, whole 9 yards with crank and rods, but u had to do it with a stock block and heads with a 2 bl of course. seen A LOT of guys blow the bottom end out of an engine. that's what made the class so fun. u could go has radical as u wanted, but a stock block can only handle so much. class was very competitive. people nowa days don't have extra money to play with. again thank u, I'm sure it take a good minute to make and edit a video.
Hey Chad... old parts guy here. I don't remember everything that fits everything anymore (lol), but I do remember how to use reference sources, and they say that the S-402 cam gear fits 318, 340, and 360 ChryslerCo engines. To be sure, check the crank gear... it would be an S-297. Looks like they pulled parts on a Friday! The set for an '82 Chevy 350 (VIN code L) would be the C-3001K for the silent-type chain and gears, and C-3023K for the roller type set. Love the channel... love the content!
Gas-ka-leens, car-ber-roster, hamma, thing-a-ma-bob, dad-blame, right-cheer - I am from the south and understand everything you are saying sir. I love the fact that you are a master of the southern vernacular. My favorite is gas-ka-leens through! Y'all be good up there in eastern, TN, stay warm and Ease Up every chance y'all get!
Nice job again, I’ve built probably a couple hundred engines of all sorts over the years and countless partial engine repairs …From v10s to Yamaha v8 to simple little 4 bangers, and of course all the regular v8 stuff. Even tho i thoroughly enjoy building engines it’s fun watching others build then too! Watching for a little trick someone does for my next build or catching a mistake they did! That thrill of firing up a fresh engine and it does what it’s suppose to do if ya did everything right…if not it can be your worst nightmare! 😂
I'm happy that cap didn't take your ear off my brother. I want a stand just like that so I can hear a small block 350 sound off any time of day or night. Yah buddy!! Thank you.
Just a helpful cleaning piston hint. I use a crock-pot & put antifreeze in it (50/50 mix) set on high & clean-em-up. Works grrrrrr8 on carboraters too .... 👍
Hi Chad i was telling u while watching the video like "hey buddy u forget to install the oilpump"but yes shit happens when u loose focus but i believe it happens in the best of families thanx for another excellent video lots of love from S A
Another great video. I learn so much from your videos. Thanks for the knowledge and the laughter. Engine stand looks rock solid 👌 Looking forward to your next video
Another great build Chad she's running like a smoothie, looking forward to the next one , oh by the way when are you going to call one of your trucks miss daisy ?? Always look forward to seeing her and that would make a grand name for one running nice and smooth .
The engine test stand is built perfectly fine. Only one change I'd make is how you have that back plate holding up on the side post by the pitch bolts. Those vibrant loose the motor is going to slide down. Maybe drill thru holes like 6 of them to adjust in the upright posts part and put a pin so there is no chance of that sliding down. Other then that it's good to go 🍻 and as far as those square plug. They sell different size sockets for that. Look up male pipe plug sockets. Buy a set of them. We use them alot in heavy equipment industry 👌
A country dude keep it up man you do some extra homework make me wish I was still living in the country working on motorbikes and go cars and Hot Wheels laugh out loud
Love all the gm 350's, and I think ya got a good one here. Hope it works out for you and the older gentleman without trouble! Keep up the good stuff my friend!
On those plugs if you will take a impact and tighten it very little and then back it out, it will back right out , I own a machine shop and those plugs can be boogers to get out don’t even have to use heat this way 👍
52:00 this is what happens when you leave the 😳 radiator cap on top of the radiator while starting the motor! You where very lucky that you didn't get hit in the face with it!!!! You were very lucky this time.... 🤠🌵🌵🌵🌵🌵
I'm Surprised you couldn't hear me screaming form Ohio "DID YOU PUT THE OIL PUMP ON". Love the engine stand, you need a hose bib shut off on the lower hose so you don't drain the radiator each time you test an engine. Lots of fun, Thanks
Little trick on small buck Everly is the only Motor it works on man told me about this was 90 years old and my grandfather Mecanic 2 started out as an engine builder and one of the biggest abs in Illinois. He said on a small block Chevrolet you can set the distributor in it and pointed towards number seven plug wire and never have to move it again it’ll fire at Pratt.
Motor runs smooth as silk ,testament to a job well done . Strange about the thermostat not letting the motor warm up with the three holes drilled in it. minor thing !!!! God Bless you and yours, stay safe and well ,Stuart in Ontario...
Hey Chad. I am enjoying this week's episode. I have a few names for that ole Mopar... Gremlins is one... Mr. Bean, (Forrest) Gump, Parts Hog Dirty Dog, Miss Tune, Dud, Son of a Gun, Tool Box Blunder, RAPOM to name a few. Cheers...!!
You should pop all the core plugs and clean all the nasty old coolant out of the block and take the three plugs out the back to the oil galley and run brush down to clean all the nasty oil out and chase all your bolt holes to clean all the garbage out of them.
👍Nice build. Also, nice “dodge” from that radiator cap 🤣🤣🤣 It was just excited to be operational once again. Sounds great! Glad to hear you’re getting the trusses! Won’t be long now! (call the ol Dodge “POS”🤣) Good stuff feller! Keep up the good work.
You can do the same thing with Harber Frate, cheap the reserve, or even cheaper than that oven cleaner is basically what that gunk is with her very long propel in it😊
I like the run stand. I've watched a lot of videos on engine rebuilds and I think you missed your calling at instruction and keeping your audience captured on a professional level. Your tops!
Dodge truck name idea... Lunch box. Because it keeps eating your lunch every time you work on it.
Might be a million builds on UA-cam but, you are the one we trust!
Very entertaining video. Engine test stand looks solid as a rock, and the engine is running really smooth. Always glad to see a cameo appearance by Ms. Daisy too.
Great job on the test stand and I can't wait to see the pole barn being put together!
Nice job on the backyard rebuild. She’s a runner.
It's a fantastic day when you get to watch a brand new video with this n that garage!!!!We wait for the video all week long!!!!Thank you for the enjoyment!!!!!Have a blessed day!!!!!?🤓🙏
Preshate that. 👍
You should call the Dodge, Red Dog! It's been dogging you every step it away 😂 your run stand looks really nice in red and your engine build turned out really well. Through the termination and tenacity you gut er done 👍 another great video Chad ✌️🇺🇲
👍
“Always do the stuff you like first. If you wake up dead tomorrow morning, you will have done stuff you didn’t like and didn’t do the stuff you did like. So, always do the stuff you like first.”- This N That Garage - That’s one worth writing down.
A T shirt maybe? 🤷♂️
@@ThisNThatGarage I wouldn’t hesitate to buy that, no siree.
I don't know how many times I sat as a kid watching my Dad rebuild engines, homing was always fun to watch, that carberator mercy sakes good thing she didn't blow.. 👍👍👍
I'm glad you realized your mistake, I was yelling at my phone Oil Pump Oil Pump!! Lol
you should be really proud of what you have managed to achieve,excellent work,thank you for sharing!
On our Sea Scout boat, we got a Chrysler 318 marine with a Carter 4-bubble. That salt cleans off the carb using CLR calcium, lime and rust remover. Swab it on liberally with q-tips and it takes it right off and stays off until the next time you go driving in the salt.
Well Dangggg feller !!! Matching sparkplug wires with that "High Plains Drifter" Red Engine helm ! She's a Beauty!
That's some uptown fabrication right-char.
Before you revealed to us the Rad cap incident I stopped the tape and slow mo'ed it and damn Chad,, you were damn lucky.
That cap was moving !! Woulda have seriously messed you up, thank heavens you're ok. You wouldn't believe how anxious we get watching waiting for that engine to bust off, it's thrilling as hell. Another fine video from Chad.. He's not as smooth as Tennessee Whiskey, But he's as warm as a glass of Brandy 👍 Excellent content.
Great job on your rebuild. A excellent video. Now just to get installed. And go for a drive. Thank you for sharing!😢
Looks like it's going to be an excellent little motor for a long time great job
Excellent example of a budget rebuild! Engine stand works great and looks mighty fine with the red paint. Well done!
One of my favorite tube channels. I enjoy your down and dirty yet methodical approach to automotive mechanics. Looking forward to the next episode(s).👍
Preshate it. 👍
That will be a good motor for your neighbor. Nice job on the garage rebuild!
The look on your face when the radiator cap flew off is priceless. I am glad you weren't hurt. Keep the vids coming !
That could have been bad!
You still did an awesome job there was a lot of trials and tribulations and you made it you got it done
Holy bajesus I laughed waaayyy to hard when you dodged that radiator cap!
Whatever you do don’t give up UA-cam! You’ve got a gift sir, and it’s entertaining us good ole boys !
Loved it all chad,warts and all. You're still the real deal.more please.cheers.
thank u sir for your time making this video and bringing back some good memories. early 90s we had drag racing with a class called bone stock, your 350 could be bord has big as u wanted to go, whole 9 yards with crank and rods, but u had to do it with a stock block and heads with a 2 bl of course. seen A LOT of guys blow the bottom end out of an engine. that's what made the class so fun. u could go has radical as u wanted, but a stock block can only handle so much. class was very competitive. people nowa days don't have extra money to play with. again thank u, I'm sure it take a good minute to make and edit a video.
The engine stand turned out nice, the engine sounds great.
That engine run stand is sweet. Bet you could sell those easy.
Perfect name for the Dodge would be "The Joker"! Just when you think you got it licked.....he throws you a new surprise!
Well you did it again you always impress with your patience. Great job.
Hey Chad... old parts guy here. I don't remember everything that fits everything anymore (lol), but I do remember how to use reference sources, and they say that the S-402 cam gear fits 318, 340, and 360 ChryslerCo engines. To be sure, check the crank gear... it would be an S-297. Looks like they pulled parts on a Friday! The set for an '82 Chevy 350 (VIN code L) would be the C-3001K for the silent-type chain and gears, and C-3023K for the roller type set. Love the channel... love the content!
Tell your mom I hope she's feeling fine I'm glad you decided to stay with you too I like watching you if you are funny and you make me laugh
👍
Engine stand looks great nice paint job can't beat a small block Chevy with those headers sounds awesome Well done sir
Gas-ka-leens, car-ber-roster, hamma, thing-a-ma-bob, dad-blame, right-cheer - I am from the south and understand everything you are saying sir. I love the fact that you are a master of the southern vernacular. My favorite is gas-ka-leens through! Y'all be good up there in eastern, TN, stay warm and Ease Up every chance y'all get!
👍
Digging the music that went along with the video!!!👍
Nice job again,
I’ve built probably a couple hundred engines of all sorts over the years and countless partial engine repairs …From v10s to Yamaha v8 to simple little 4 bangers, and of course all the regular v8 stuff.
Even tho i thoroughly enjoy building engines it’s fun watching others build then too! Watching for a little trick someone does for my next build or catching a mistake they did! That thrill of firing up a fresh engine and it does what it’s suppose to do if ya did everything right…if not it can be your worst nightmare! 😂
The old chevy three-fiddy sounds Fantastic. You sir have her running pretty smooth. Great job!
I'm happy that cap didn't take your ear off my brother. I want a stand just like that so I can hear a small block 350 sound off any time of day or night. Yah buddy!! Thank you.
Just a helpful cleaning piston hint. I use a crock-pot & put antifreeze in it (50/50 mix) set on high & clean-em-up. Works grrrrrr8 on carboraters too
.... 👍
Geeez, nothing but a good time. That's what this was. Super fun.
Please somemore will they run !!! I love watching yours !! Thanks brother !!! Still watch all your videos.... lol
Hi Chad i was telling u while watching the video like "hey buddy u forget to install the oilpump"but yes shit happens when u loose focus but i believe it happens in the best of families thanx for another excellent video lots of love from S A
Great video love your attitude and intestinal fortitude it's inspiring!!
Very very sweet sound like a boat. You need to take a bow. You done a great job 👏 👍
The run stand is looking awesome and the motor sounds great. Excellent job as always good content 👍👍
I'm just amazed! You are a badass! I am so glad I ran into your channel. I can't wait to see what else you have coming!
Preshate it. 👍
Another great video. I learn so much from your videos. Thanks for the knowledge and the laughter.
Engine stand looks rock solid 👌
Looking forward to your next video
👍
Always enjoy watching the Fire up of a fresh Engine. I really like your run stand!
Oh man, the neighbours are gonna just love you
Chad, that was awesome! That stand is really nice👍🤣👍
Love me the sound of a SBC, and that one sir is crisp! Beautiful work, as always :)
LOve open Headers!!!! YES!!
Darin has my vote
Lunch Box for the win
Hope you’re doing great
PEACE ☮️
Nice video as always 👍. Impressive man but I would change that oil filter to ac delco or wix filter
That 350 sounds like a million!! Great to see it start hot at the end with just a touch of the button. Great build and super educational!!
man I'm glad that rad cap didn't hit you in the face. great job on the build, i always learn something
I really like the engine rebuild videos Chad. Very entertaining to me and informative.
Running stand looks great painted looks like store-bought great job
Thanks for the video. Like the run stand!
Another great build Chad she's running like a smoothie, looking forward to the next one , oh by the way when are you going to call one of your trucks miss daisy ?? Always look forward to seeing her and that would make a grand name for one running nice and smooth .
The engine test stand is built perfectly fine. Only one change I'd make is how you have that back plate holding up on the side post by the pitch bolts. Those vibrant loose the motor is going to slide down. Maybe drill thru holes like 6 of them to adjust in the upright posts part and put a pin so there is no chance of that sliding down. Other then that it's good to go 🍻 and as far as those square plug. They sell different size sockets for that. Look up male pipe plug sockets. Buy a set of them. We use them alot in heavy equipment industry 👌
Doubt that'll happen but if it does it can't go far.
@@ThisNThatGarage life has a funny way of showing us the truth when we doubt stuff 🤣
"Aggravation" is a good name for the Dodge!
Sure is!
A country dude keep it up man you do some extra homework make me wish I was still living in the country working on motorbikes and go cars and Hot Wheels laugh out loud
Love your videos, Lady petrolhead (and diesel head too!) from UK here, really enjoy your commentary and work ethic.
Hello UK! 👍
Good to see you Fella, let’s get this Stand Holdina Engine
Love all the gm 350's, and I think ya got a good one here. Hope it works out for you and the older gentleman without trouble! Keep up the good stuff my friend!
Great vid,, simple explanation on technical issues that a layman can understand,, good job! Dodge name COW,,, can of worms👍
I really like what your doing, it works well with your personality. Good job editing as well. Very good videos.
Preshate it. 👍
On those plugs if you will take a impact and tighten it very little and then back it out, it will back right out , I own a machine shop and those plugs can be boogers to get out don’t even have to use heat this way 👍
THAT engine sounds WICKED!!!😁
Reminds me of a WWII fighter aircraft firing up a big radial engine at first!😁
👍🇺🇸😎
52:00 this is what happens when you leave the 😳 radiator cap on top of the radiator while starting the motor! You where very lucky that you didn't get hit in the face with it!!!! You were very lucky this time.... 🤠🌵🌵🌵🌵🌵
Sounds healthy great job as always
I agree!
Great job on the engine stand and tree 50 rebuild 🎉. Really enjoy your videos and recommend your channel.
Great show love the content ,wishing you all the best for this year, from across the pond in the uk
Excelente video usted es un muy buen maestro de la mecánica aprendí mucho con este video lo felicito
I appreciate your videos and your sarcasm it's fun watching your videos
I'm Surprised you couldn't hear me screaming form Ohio "DID YOU PUT THE OIL PUMP ON".
Love the engine stand, you need a hose bib shut off on the lower hose so you don't drain the radiator each time you test an engine. Lots of fun, Thanks
It only has water in it so it's no big deal.
One very good motor stand it works real good and the motor sounds good
Nice work This N That! The engine stand works real well and the ol motor sounds strong. Great video!
Great video as always, very enjoyable... Tommy in Ireland 🇮🇪
Little trick on small buck Everly is the only Motor it works on man told me about this was 90 years old and my grandfather Mecanic 2 started out as an engine builder and one of the biggest abs in Illinois. He said on a small block Chevrolet you can set the distributor in it and pointed towards number seven plug wire and never have to move it again it’ll fire at Pratt.
Good job on the engine stand! It looks like it works great
Nice job on the motor sounds good
With the wasp nest on the block, I would call the engine ''The Mud Dobber Eight.'' The stand is great looking. You're de-greasing with de-Gunk...
As always, entertaining and educational - love the channel - From South Africa.
Another great video Chad you had that motor looking brand new 👌
Motor runs smooth as silk ,testament to a job well done . Strange about the thermostat not letting the motor warm up with the three holes drilled in it. minor thing !!!! God Bless you and yours, stay safe and well ,Stuart in Ontario...
Hello miss daisy. Nice work Chad 👍. Wish some of my project engines looked that good to start off with.
I really enjoy the engine rebuild videos!
Hey Chad. I am enjoying this week's episode. I have a few names for that ole Mopar... Gremlins is one... Mr. Bean, (Forrest) Gump, Parts Hog Dirty Dog, Miss Tune, Dud, Son of a Gun, Tool Box Blunder, RAPOM to name a few. Cheers...!!
That's a good 4 bolt main moter
Very nice! While tuning it looked like you were playing a large instrument in a concert. LOL
You should pop all the core plugs and clean all the nasty old coolant out of the block and take the three plugs out the back to the oil galley and run brush down to clean all the nasty oil out and chase all your bolt holes to clean all the garbage out of them.
perfect motor now love the run stand u could patten that male money lol awsome awsome rebuild fora budget keepem commin
👍Nice build. Also, nice “dodge” from that radiator cap 🤣🤣🤣 It was just excited to be operational once again. Sounds great! Glad to hear you’re getting the trusses! Won’t be long now! (call the ol Dodge “POS”🤣) Good stuff feller! Keep up the good work.
He dodged that cap like it was nothing! Great reflexes. If that’d been me, I would have had a black eye for a week!
@@lawrenceedwards6327 👍🤣🤣
Another awesome video, thanks 👍🏼
You can do the same thing with Harber Frate, cheap the reserve, or even cheaper than that oven cleaner is basically what that gunk is with her very long propel in it😊
Sounds good!
Need to mount a small fuel tank on your test stand
Nah, gas can works great and the gas won't go stale just sitting in a tank.
That motar sounds sweet🔥🔥🔥
Gotta say this is a great channel even got me doing stuff.
Awesome. 👍
I like the run stand. I've watched a lot of videos on engine rebuilds and I think you missed your calling at instruction and keeping your audience captured on a professional level. Your tops!
Preshate that.
Love the stand, can't wait to see the new shop, may God bless all you do.