We Bedford Truck Dumper Are Made ||Pakistani Trucks ||
Вставка
- Опубліковано 25 лис 2023
- We Bedford Truck Dumper Are Made ||Pakistani Trucks ||
#amazingwork #machinist #pakistanitrucks #manufacturetrucks#truckrestoration
We Bedford Truck Dumper Are Made ||Pakistani Trucks ||
#manufacturingpakistanitrucks
#truckdumperaremade
#bedfordvehiclesmakingallprocess - Наука та технологія
Цирк на колëсах Безумный Макс просто курит в сторонке 😂😂😂😂😂😂
In the not too far distant future, while us in the west will be sinking under the weight of un-recyclable batteries, and cars that are so complex that they can't be repaired, these gentlemen will be recycling components for the tenth time, and making the most beautiful mobile artwork on the planet.
😊😊😊
ماشاء الله بوركت تلك الأيادي التي صنعت شاحنه من العدم بكل تفاصيلها وأجمل شيء عندما رفع صوت الأذان اللهم إنا نسألك العفو والعافيه
(IMO)The truck itself will be a bit heavy because it’s made out of steel, but they are very coordinated and interesting in the skill parts of building the truck. they built it from bumper to bumper there’ blueprint in the head. Very smart.
Я так понимаю, что проблем в плане постановки на учет такого чуда там нет, как и самого учета...
😂😂😂
Как говорили в одном фильме «нет документов - нет проблем»
Ну если в производственном процессе участвует осел-ребятам можно доверять.Машина надежная!!!
Вот очень двусмысленно прозвучало
It's really interesting to see how they mixed and match parts to build the truck,
engine, differential axle , chassis all from different vehicles,
Asian engineering at it's best 👍
Молодцы мужики,сами построили самосвал без всяких роботов и компьютеров.😮😮😮!!!!! Просто класс!
То то у них потом все ролики, как полуоси , мосты и диски колесные рвет. Ничего, так же, без компуктиров сварочкой заварят и дальше, в пятитонник тридцать тонн грузить с центром тяжести три метра над землей. Молчу про удобство входя в этот пепелац, там не только компуктиров нет но и разума
Интересно, через сколько лет сварщики в обычных очках слепнут?
@@user-nz8xz6ji2oэто сварочные очки
Такое ощущение, что они живут здесь и сейчас. "Завтраками" ни кто не кормит.
@@user-zr2tq4lp3q Я вообще сначала подумал, что это самосвал для....для праздника или для демонстрации.... На счёт загрузки борта: а как они ссыпаются-то? Со всем грузом обратно же опрокинуться на раз два....
It is unbelievable that these men started with a frame and built that truck with so few modern tools, that could never happen in America
Supply and demand will dictate the cost of labour … . But they are great craftsmen nevertheless
They start with iron sheets.this handmade frame is also new
The most amazing part is they're doing it with open sandals on
Молодец супер мастер свою работу
to to ka namaste namaste 2ww222namaste@@ExSheriffFattyBoySkinnyArms
This is called management.
They work hard with precision.
They make use.of resources in an effective way.
Highly skilled techs...
Love from India.
God bless you all in Ramzan season.
Amen Hallelujah
ماشآءالله ماشآءالله ماشآءالله تبارك الرحمن جزآك الله خير 🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰❤️🇵🇰
Also wen da ein deutscher sicherheisinspektor anwesend wäre der würde einen Herzinfarkt bekommen 😂...aber alle Achtung Leute einfach top wie und mit welchen Mitteln die so etwas von nichts aufbauen... Einfach nur TOP👍👍👍
Spachtelmasse und Artwork halten allles zusammen.
Aber immerhin mit Sicherheits-Sandalen von Adidas 🙂 05:12
Ho boy! a lot of tack welding on a truck frame im curious how long before this frame is ripping apart...
3 Fantas and 100 rupees to get it fix 😂
@@CihttiBabbuu-dt9qw 🤣🤣🤣🤣
The engineers of Parkerstan are very skilled craftsmen !
Thanks for sharing……..
Pakistan*
Вот он какой на самом деле шайтан-мобиль😂
Во всяком случае прослеживается использование именно металла и дерева в постройке данного мобиля, а не как в "новой" буханке фольга и картон...
I've got to say The graphics & painting Very good & inside of Cab aswell, That's made up for Rust 😊
The man who painted the flowers did a excellent job, very nice....👍👍👍👍👍👍
Saludos para todos y muy buenos sus videos y también sus trabajos, seguimos con sus videos 🙋
In the fab/welding shop where I worked in Doug Ford`s Ontario , there were more foremen and safety supervisors than people working , not counting engineers .
I guess this is the other extreme . What we used to have . But our industry has disappeared .
😂 Are lost only know how to get drunks
See wearing regulated safety sandals. 😊 . Safety 1st. 🙄
Safety sandals are number one in India!
Australian safety boots 😂
Safety second
@@jamesdegraff actually it's safety 3rd! 😂
ألله يعطيكم صحة وعافية وستر كم
He's Bloody fast on that Tractor, 😊
Give GMC a run for their money! The donkey was a nice touch! Would have liked to see some full welds, saw nothing but tack welds throughout the vid... Would have liked to see better weld prep on the hydraulic frameworks, especially those flame cut pieces...Use of torque wrenches?...not fond of body filler over welds...quite the painting artist! loader operator a bit of a psycho...overall, impressive work!!
I've watched so many of these paki videos where they are putting on cylinder heads, or hydraulic pumps with ZERO torque wrench. Just guesstimations. Its wild.
Yeah, I thought the welding was pretty sketchy.
Не самосвал, а произведение исскуства 👍👍👍💪
HOLA DESDE COLOMBIA !!!
Там еще по-любому рама в два раза толще (вложили один лонжерон в другой и сварили) и рессоры вижу усиленные. И зачем лепить тонну шпакли на грузовик? Они его на выставку везти собрались?
Я тоже думаю, покрасили и хватит
Замазанный грузовик на выставке? Мам, кажется, я потерял клетки мозга, читая этот комментарий на английском...
Гжель, хохлома и аэрография тихо курит в стороне )))
почему ты решил, что в Пакистане понимают твою кириллицу?
Русский перевод Google ужасен, поэтому я не понимаю, о чем вы. вот почему я сказал, что потерял клетки мозга, читая переведенный комментарий.
Its amazing how they build this truck with just basic tools. And that the truck represents their heritage and culture. Great job!
Bedford engine, one from the best in XX Century. Still in use. I will bye one, I will clean this engine beautifully and I put it in my living room as a decoration.
Great job men are the guys at the end of video we’re the guys in charge.
😂 yes! it is needed to pray before get in this car and drive it..
when he dump all the back of the truck is rolling off the frame ...🤣🤣🤣
There's so many of these trucks on the road, what can you say?
MashAllah great 👍 but yaar chuppal to na pakhnay yaar
That is one strong truck box well done and the truck looks brand new
Mad Max:)дорога я даже не знаю куда
Que o pai de toda criação esteja sempre ao lado de vcs .👍👍👍🙏🙏🙏🙏
ما شاء الله .. عمل عظيم جدا .. تحيا دولة باكستان ❤
모든것을 즉석에서 만들어버리는 놀라운 기술
Молодцы . Смотрели от начала до конца с интересом и не пожалели 1го часа времени на прсмот р
Super gut Arbeit 😊
Good working bro 😊😊😊😊
Muito bonito o trabalho de vocês. Uma verdadeira obra de arte.
А что если сразу у ж/д вагона поменять колёса и кабину присобачить, вес то примерно одинаковый будет😂.
Last one, The clearance on front axle
From the Top of Wheel to wheel arche on. Cab Says it all ?
I've finished,😊
Very beautiful ❤❤❤❤❤
Excelente trabajo los felicito a todo el equipo desde Chile
Awesome job, guys. Beautiful heavy-duty truck.
Здорова щеглы! Сегодня мы своими руками будем собирать самосвал!
As any one notisted the Cab Doors open,
Brilliant; Keeps the cost down ,😊
Nice unique cultural cab section.
Сам иногда балуюсь сваркой. Но глядя как он варит в шлепанцах ...)))
почему ты решил, что в Пакистане понимают твою кириллицу?
Acredito que no Paquistão um Truck não é apenas um veículo de carga mas também uma oferenda a uma entidade sagrada muito importante para eles, impressionante a quantidade de ornamentos e enfeites. Quanto aos trabalhadores só tenho a dizer que são extremamente habilidosos sem medo de por a mão na massa e fazer acontecer, parabéns a todos e obrigado por postar.
Hola...excelente tu video amigo donde se
muestra el tremendo esfuerzo y gran capacidad para realizar ese trabajo,sin ningún elemento de seguridad,en ninguna parte del mundo lis prevencionistas de riesgo del estado permitirían trabajar en esas condiciones,pero el trabajo es excelente pese a todo....saludos amigo,seguiré viendo tus videos que son muy buenos ...
Respect to these masters of the highest class.
They also draw!!!
This is not a dump truck. This is a work of art.
Автомобіль, як витвір мистецтва!👍❤️
Excellent work my friends you guys are amazing and have great skills. Keep up the great work and greetings to you from Mexico 🇲🇽
everyone working in style XD
Не удивительно, страна этих людей имеет ядерное оружие. Эти люди сделали всё, для своей безопасности. Пожертвовали всем ради этого. Спасибо Беназир Бхутто! ❤
@@user-dr7zn2fi9wЯ тоже так думал, пока на мою страну вероломно не напала рашистская федерация. 😢
Спасибо❤❤❤❤
Fantástico 👍👏
Так вот где АвтоВаз берет современные технологии.
57:46 дверь где 😂
только люк
Весь успех бизнеса в фирменном изгибе электрода😊
You guys should put a stand for when putting the hoist on . Put the stands under the body so when you need to work on the Hydraulic System. Just a suggestion my friend. Great work indeed
They got skills, their talent can be used industry sector
saludos desde Venezuela muy buen trabajo ,es admirable
excelente trabajo
Сколько тонн, весит пустая машина?, и какая грузоподъёмность?
Ханна мотору 😅
на таком на Перерву в Москве. на учёт подкатить. типо историчекое наследие. оформляться во контент будет!
this people are really good ....nice job even though it will be very heavy without load ....with load the engine will suffer
I love how thet put bondo over the terrible welds to hide them.....
Все нармално; но кузов чересчур высоко , иза перегруза нету баланса груза и поэтому у них рвет ходовые и рулевую , ресоры, шкворни, иповоротные цапфы ; но надо дать респект - выживают, иного выхода нет.
Gosto de assistir a esses vídeos de profissionais que considero artesões. A parte intrigante são as propagandas de equipamentos tecnológicos avançados, como máquinas de corte à laser em ambiente imaculado.
Sıfırdan bir kamyon yapmak kutlarım
А как же болты, неужели все на сварке чтоли!? 😮
Вот это пепелац 💪
Ну когда он вошёл в окно,тут всё стало на свои места 😮
Few welds make fast work!
Cataracts gone wild.
We can't work in that state for a single day. My body is chilling to touch and carry a sharp iron plate with my sandals bare hands. However, their hand skills are highly appreciated
😂😂😂 Супер
Bahi g konsa area ha yeah pakistan mei
this truck must be pretty heavy compared to ours, but also probably more durable in view to the working conditions.
13000kg empty
63000kg loaded
Esse caminhão parecem com carros alegóricos do Carnaval do Rio de Janeiro de todo enfeitados 😅😅😅
😂
There every day is carnaval day.
Красавцы!!!
the thing on the top helps with aero --- the thing on the front is a nice crumple zone
Cost kya ie hai?
I have to admit I like it
Not sure about the goggles for arc welding. Ah yes the paint makes all the difference
It seems that they do not do a full weld to the joints 😢Are they going to do it later when everything is in place?
Ces hommes là sont géants.
Мосты явно на такой вес не рассчитаны, вот и варят через каждую поездку
Не машина А могила с искустаенными цветами осталось венками обвешать😮
All that work and no doors seems a bit odd.
What does the pictures on the back of the truck mean? Are they all different?
Buat lori macam buat bot....hihihi
Buen trabajo,pero reforzando tanto el chasis y amortiguadores los ejes quedan demasiado débiles para aguantar el peso del camión y su carga,especialmente el tren delantero.
A hand built dump truck. Word
Да уж я представляю как это поедет, how it will takes stars on NCAP)
Bahi ji kbi faslabad dabbe k cabn ki mokamil video bnay or jis workshop ki video bnate hn inka contact nomber or city bi shear kiya karne thanks 🌹👍
Oky Bhai
Faisalabad kis Kon sa dabbe Banty ha
Can somebody please get these men some work boots something to protect your feet. Very important. I saw one guy on this video of his foot was hurt
Forget the boots they need more safety equipment for there hands face and etc when welding and a sandblasted for taking the rust off
особенно "впечатляет" лако-красочный цех