For aluminum and things with lower melting points( Lead Zinc((don't heat too high with zinc!!))at the very least I can confirm that this build will work for an intermediate+ build. I've had success with beginner builds involving plaster of Paris+concrete+steel wool. The crucible they are using is superb compared to my steel diy one. Also I used lump charcoal+hairdryer build, but propane is gonna be better in terms of cleanup and fuel replenishment (granted that propane has more preparation requirements, but is easier to regulate). Happy melting to all and A++ on vid! I really enjoyed it! ALSO!!! ***SAFETY SAFETY SAFETY***!!! HEAT YOUR GRAPHITE AND Metal MOLDS TO AVOID STEAM EXPLOSIONS. Also from experience, slow down when dealing with these temps! I've several burns from my own amateur mistakes (Grabbing hot objects, splashes, etc...) This is a FUN hobby, but despite all precautions: mistakes will be made. Take as many precautions as possible to minimize injury as they can.result in SEVERE TRAUMA. That being said, this is the most enjoyable hobby I've ever had and well worth the time, research and investment. Do your research and enjoy the fruits of your labor! Wear appropriate respirators!
I mean I've got nothing to say against the kiln making and using, but with such a bad cast at the end you may as well just use an ingot and grind it down from there. could have put a little bit more effort into that one.
Para hacer la daga, puedes emplear arena pero con dos partes en el molde y con un vertedero y un desfogue. El acabado es casi perfecto desde el desmolde
Awesome Video and Thank you for making this..... I’m going to make one from your idea..... I STARTED POURING BUT WANT TO MELT COPPER AND BINGO HERE WE GO...... AWESOME JOB
I don't understand these videos it goes from how to make a homemade metal foundry to look how much work it took me to polish this aluminum dagger. like what happened to how to make The foundry the little tricks and stuff and measurements and all the little fine details. it is what it is
.....uhuh. but folk were happy with only copper in the copper age . Perhaps melting down old pistons would give a harder product but impossible to file down with steel files or to machine .
@@BetaTestedUrMom Knives are better made of steel.. He could have cast a cool knuckeduster if he wanted a light weapon. My opinion only though, I was impressed with the home made furnace
Bro is it safe to cut the neck of gas stove like that?I want to try it but I am very scared of gas stove so I want to make sure that it is a safe way of doing it and nothing bad going to happen specially the gas part.
@@bharadwaj_yadavalli I couldn't find the exact answer bro so I think I'll buy a professional Lpg brazing torch instead of risking my life with this DIY homemade torch and I think you should also do the same because god forbids if anything goes wrong it could easily turn into a tragedy.not worth a risk.
@@noidontthinksolol it won't burn at 1500 degrees Celsius simply because he didn't use the right material to achieve that temperature. If you see the video in the beginning you'll see he is using a 1450 c rated ceramic blanket.
@@noidontthinksolol unfortunately it's not the case for ceramic blanket. If it's rated 1450 c it means its working temperature is below. I was looking to purchase ceramic blanket and that's what the manufacturer told me. I am not an expert in the field
Can anyone tell what is the thing which he used to give shape to melted metal That sandy square shaped structure what is that????? Please anyone tell me
Dude wtf u saying hairdryers aren't even close to heating the crucible, let alone heat guns. U need a strong source of heat, u melting metal, not plastic bro
are you insane? lol no you can't use a heat gun or a blow-dryer to melt... a heat gun gets to like 800-1000F max, to melt aluminum, which has the lowest melting point of all production type metals, requires 1220F(660C) minimum. Brass requires 1810-1880F (990-1025C) Copper requires 1983F(1084C) to melt iron is even higher, needing almost 3000F (around 1600C) Titanium requires the highest of those 3040 F (1670 C) you can't even get close to melting anything useful out of a heat gun, a blowdryer is far far far weaker than even that. lol People sometimes use a blowdryer to force air in, in addition with the propane or natural gas) but it can't melt anything metal at those low of temps.
Too funny 😂🤣.. hairdryer...the heat gun has possibilities.,. I'd imagine it as the interior and you'd have to build a furnace around it to contain the heat...I bought an electric metal melting furnace and it's basically heat coils wrapped around ceramic surrounded by insulation and then metal ...so a heat gun isn't so crazy sounding
@@mikkiwirawan11 maaf sekali belum saya coba..sy masih dalam rencana untuk bisa melebur limbah aluminium untuk dicetak menjadi velg racing🙏karena untuk sekali lebur diperkirakan membutuhkan 10 kg limbah aluminium..jd masih merancang volume ketel yang tepat dan bahan bakar yang murah
Iron has a melting temperature which is more than 1800°c, which the furnace may not be able to handle. Aluminium, zinc and copper can be at max melted. don't even dar to try melting other metals, they can be lethal!!
@@riqqarddopv7918 Brass is an alloy that contains Zinc, which has the tendency of evaporating while the brass is melting, inhaling such vapors causes the "Welder's sickness", also known as metal dust fever or "Monday morning fever", a generous amount of Borax would prevent the zinc from getting lost. Always work in a well ventilated area, or wear respiratory tract PPEs all the times!
For aluminum and things with lower melting points( Lead Zinc((don't heat too high with zinc!!))at the very least I can confirm that this build will work for an intermediate+ build. I've had success with beginner builds involving plaster of Paris+concrete+steel wool. The crucible they are using is superb compared to my steel diy one. Also I used lump charcoal+hairdryer build, but propane is gonna be better in terms of cleanup and fuel replenishment (granted that propane has more preparation requirements, but is easier to regulate). Happy melting to all and A++ on vid! I really enjoyed it! ALSO!!! ***SAFETY SAFETY SAFETY***!!! HEAT YOUR GRAPHITE AND Metal MOLDS TO AVOID STEAM EXPLOSIONS. Also from experience, slow down when dealing with these temps! I've several burns from my own amateur mistakes (Grabbing hot objects, splashes, etc...) This is a FUN hobby, but despite all precautions: mistakes will be made. Take as many precautions as possible to minimize injury as they can.result in SEVERE TRAUMA. That being said, this is the most enjoyable hobby I've ever had and well worth the time, research and investment. Do your research and enjoy the fruits of your labor! Wear appropriate respirators!
can we melt brass with this spect?
Best comment, thanks man
Can we use this furnace to gold?
Is mitti ko kiya bolte hai
I'll add this to my favs, It may take a year, but I'll get this stuff
I mean I've got nothing to say against the kiln making and using, but with such a bad cast at the end you may as well just use an ingot and grind it down from there. could have put a little bit more effort into that one.
I been wanting to make me one to play with and this was a great video and I'm going use it to make mine...Thanks
Para hacer la daga, puedes emplear arena pero con dos partes en el molde y con un vertedero y un desfogue. El acabado es casi perfecto desde el desmolde
Awesome Video and Thank you for making this..... I’m going to make one from your idea..... I STARTED POURING BUT WANT TO MELT COPPER AND BINGO HERE WE GO...... AWESOME JOB
عاش نصارة بدون فلفسة فديو خفيف 😊😊😊😊😊
you are wonderful! your way are very practical, how long can you use this furnace?
I don't understand these videos it goes from how to make a homemade metal foundry to look how much work it took me to polish this aluminum dagger. like what happened to how to make The foundry the little tricks and stuff and measurements and all the little fine details. it is what it is
Ahh, it all makes sense now. This is how everything I order off Amazon is made
Very good!
pity that the object you cast is not ideal in aluminum!
.....uhuh. but folk were happy with only copper in the copper age . Perhaps melting down old pistons would give a harder product but impossible to file down with steel files or to machine .
What do you mean Mr.gamb
@@BetaTestedUrMom Knives are better made of steel.. He could have cast a cool knuckeduster if he wanted a light weapon.
My opinion only though, I was impressed with the home made furnace
वाह!! मौज कर दिए 😁😁*👍*
0.46 ઘણુંજ સરસ. I saw a (ગુજરાતી) Gujarati Newspaper wrapper. Kudos from US.
Tem ter um suporte pra não encostar no piso
Cool furnace..... and at (8:50) nice letter opener.
Muy buen trabajo!
Se lo puede mejorar haciendo que la llama incida tangencialmente a la pared interior del horno.
quick question , whats to keep the nozzle and pipe from heating up and causing a explosion ?
the gas in the cylinder gets cold with time from extensive use, so then they just put it in water, so that explaosion will never happen
@@etiennenel4494 how gas cylinder gets cold ??
@@kishanpreston1533 due to escaping of gas (effusion) from the cylinder
@@sa_ad thanks for advice Bro ❤️
@@etiennenel4494can we melt brass with this video set up?
Good job ka-Metal lalabs always
Wow nice bro 🤔🤔🤔🤔
Nice work in making melting furnace 👍
Tis is very good job thanks for you
Your metal looked a little bit low in temp when poured. Maybe leave it like a few minutes longer . Otherwise nice
Nahi Bro, He melted Aluminium and It has a really high surface tension, that's why it was stopping in crucible before pouring
can we melt brass with this video set up?
Bro is it safe to cut the neck of gas stove like that?I want to try it but I am very scared of gas stove so I want to make sure that it is a safe way of doing it and nothing bad going to happen specially the gas part.
I'm also thinking about it bro if you know that pls reply me
@@bharadwaj_yadavalli I couldn't find the exact answer bro so I think I'll buy a professional Lpg brazing torch instead of risking my life with this DIY homemade torch and I think you should also do the same because god forbids if anything goes wrong it could easily turn into a tragedy.not worth a risk.
It's not safe
You could replace the gas for charcoal and a leaf blower. However, I don’t know.
@@Realog35 that'd be a too weak source to burn, i mean it will melt buf it'd take ages.
FAKE, not 1500°, maybe 900...
Who cares as long as it can melt something.
Or 837.67378°C ?! 😶🥴
Aluminum melting point is 1221°F, so it's probably hotter than 1200 at least
@@noidontthinksolol it won't burn at 1500 degrees Celsius simply because he didn't use the right material to achieve that temperature. If you see the video in the beginning you'll see he is using a 1450 c rated ceramic blanket.
@@noidontthinksolol unfortunately it's not the case for ceramic blanket. If it's rated 1450 c it means its working temperature is below. I was looking to purchase ceramic blanket and that's what the manufacturer told me. I am not an expert in the field
Thanks sir
Really cool and I will like to make this to melt my metals. May I ask what are the stuff you put in at 2:47 - 2:55?
Just some metal wire and steel wool, it’s to reinforce
I am talking to you
can it melt stainless steel
no probably not
Do you melt copper with
26% high crome ke liye chalta hai kya
Can you make a dagger from iron and silver as the blade
Nice video🎉
Great video!
Is it possible to put list of materials in description of video?
Thanks BR
Good job 👏
Excellent! Thank you!
What that pot made up of? where is it available?
Great effort broii
If I have to melting silver can use this?
Yes can
Would this work for melting bronze?
i wonder why you add thread of metal in the mix? to stick the mix together?
Nice👍👍👏👏
Very good project
Looks like you started with an abrasive disk and moved on to a sander. Did it explode on you?
Fascination
Great Thank you for sharing!
where to buy the set
Dudes were making way better swords 5000 years ago. If only they had UA-cam.
Vvvvv good thanx
Sar muje bana na he ye mitti konsi ladd rahe the ye whaite wali
casting clay graphite or aluminium silicate blanket Kaha se. mangaya
अमेजॉन 💯
Where to buy these accessories
Bhai ye metal pigal ne ka magga kese awadar Kiya
Magga ka naam kya hai
Can anyone tell what is the thing which he used to give shape to melted metal
That sandy square shaped structure what is that?????
Please anyone tell me
Hi....this furnace require high pressure gas?
Not exactly high pressure but a clean source of fuel, becz u don't want a orangish red flame. The more ble the flame the more better
CASTING FURNACE!!!!!!!!
Gold, Silver, Scrape, Copper, Aluminum Melting Propane Furnace
How hot can the furnace get?? Can it do more than 900°C??
defenetly it can get to temperatures of up to 1200 which is enough to melt aluminum and iron and anything more reactive then those
আসসালামু আলাইকুম ভাই ওই জিনিসটা আপনার কাছ থেকে কিনতে পাওয়া যাবে??
What can be put in it it melts like water
Can you melt betteri
Bạn mua bao nhiêu tiền cái nồi nấu kim loại vậy bạn ơi
1500C can melt steel. Could you try that please ? :P
Beglati konse ceez men ho yaar ..plz plz batana
Is it ok if I use plaster of Berlin?
el yeso con arena se cuartea mucho y se daña no era mejor cemento con arena?
Si usaba el cemento no podría hacer ese agujero para la gas. Pues los dos funcionan igual.
Can u use a heat gun on a furnace and see if it will melt the metal. Could a heat gun replace gas or even using a blowdryer. Will that be hut enough.
Dude wtf u saying hairdryers aren't even close to heating the crucible, let alone heat guns. U need a strong source of heat, u melting metal, not plastic bro
are you insane? lol no you can't use a heat gun or a blow-dryer to melt... a heat gun gets to like 800-1000F max, to melt aluminum, which has the lowest melting point of all production type metals, requires 1220F(660C) minimum. Brass requires 1810-1880F (990-1025C) Copper requires 1983F(1084C) to melt iron is even higher, needing almost 3000F (around 1600C) Titanium requires the highest of those 3040 F (1670 C)
you can't even get close to melting anything useful out of a heat gun, a blowdryer is far far far weaker than even that. lol
People sometimes use a blowdryer to force air in, in addition with the propane or natural gas) but it can't melt anything metal at those low of temps.
Too funny 😂🤣.. hairdryer...the heat gun has possibilities.,. I'd imagine it as the interior and you'd have to build a furnace around it to contain the heat...I bought an electric metal melting furnace and it's basically heat coils wrapped around ceramic surrounded by insulation and then metal ...so a heat gun isn't so crazy sounding
I am worrying about if it blast after reaching high temperature around 1000c
Can we melt brass
Very good!☺👍🏻
Which material
Alternative for aluminium silicate blanket plss
if you dont want to waste you gas to heat the soundings, spend some money
Balti ke andar Kiya mteriyal lagaya he whait colour ka
vai je patile oi patulta kiser daya kore bolben
Where do you buy a metal melting po
what is the stuff he is putting in the mix that looks like grass?
I think it's thin wires for support and to make it durable
Did you order from amazon or alibaba ?
He didn't answer your question in more than six months ago.
Apakah harus ada ketebalan minimal untuk ketel tempat peleburan aluminiumnya?..tks salam dari putwokerto jawa tengah indonesia👍👍👍👍👍
gimana pack sudah di tes ?
@@mikkiwirawan11 maaf sekali belum saya coba..sy masih dalam rencana untuk bisa melebur limbah aluminium untuk dicetak menjadi velg racing🙏karena untuk sekali lebur diperkirakan membutuhkan 10 kg limbah aluminium..jd masih merancang volume ketel yang tepat dan bahan bakar yang murah
Copper is also possible?
How much the price of Gas propane melting furnace
Lid cracked after first use, huh?
I bet it's dust by now.
What price this melting machine
Thanks
what is that holder called? Like the cup thingy with all the metal inside. :-)
Crucible
@@mikeydontlikey1 i figured it out. But thank you so much!❤
What is the name of white material
Very great video. Is gas propane or LPG?
lpg
Nice work bro 👍 but what kind of gas you made ? Is a cooking gas !? Please reply !?
Where did you buy them by mails?
I have the exact steel balti 🤓
Owww wonderful
Donde puedo conseguir un crisol aquí en Mexico edo. Naucalpan
Where can i get these meterials
good
I can’t believe he is doing this while wearing sandals
will this melt silver?
yes, probably, if it can melt steel it can melt silver. Silver is pretty high up there though, requires around 961C to melt.
Is that concrete
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Where did you get the brown sand?
wet sand
Can I melt iron in this furnace?.
Iron has a melting temperature which is more than 1800°c, which the furnace may not be able to handle. Aluminium, zinc and copper can be at max melted. don't even dar to try melting other metals, they can be lethal!!
@@vinayakonimani7628 is brass lethal when melted?
@@riqqarddopv7918 Brass is an alloy that contains Zinc, which has the tendency of evaporating while the brass is melting, inhaling such vapors causes the "Welder's sickness", also known as metal dust fever or "Monday morning fever", a generous amount of Borax would prevent the zinc from getting lost.
Always work in a well ventilated area, or wear respiratory tract PPEs all the times!
I heard that plaster of paris can explode ? Help i need help!!!
charkol.geriphit.ko.kese.kharidhe.ge
bravo
Wow