[4K] How to Hand Solder 0402 Small Surface Mount Component SMT/SMD Like a Pro

Поділитися
Вставка
  • Опубліковано 17 жов 2024
  • This video shows tips to manually solder small SMT component like 0402 package. Although 0402s are extremely small, you can solder them like a pro if you follow my instructions.

КОМЕНТАРІ • 24

  • @RadioTrefoil
    @RadioTrefoil 4 роки тому +4

    Good technique, I've found it works very well. Once you know how, SMD is way easier than through hole soldering

    • @Haskellerz
      @Haskellerz 4 місяці тому

      Soldering is
      1% Skill
      99% quality of flux

  • @orfeous
    @orfeous Рік тому +2

    Easy, I don't have any magnification glass but it works without it 👌
    Good light source is key and good eyes.

  • @thefreese1
    @thefreese1 Рік тому +2

    Holy crap ..it looks like you soldered that processor in by hand too ... thats impressive ... I would hav liked to have seen that ..

    • @Papperlapappmaul
      @Papperlapappmaul Рік тому +1

      Large ICs are actually pretty easy to hand solder even with very fine pitch because they're heavy enough to stay put instead of sticking to your soldering tip or tweezers. Extra flux really helps, though.

  • @kevinholthausen8499
    @kevinholthausen8499 Рік тому

    Which Mikroskop do you use? I’ve tried now 3 different models but they were shit.

  • @freereloadcredit1514
    @freereloadcredit1514 Рік тому

    Do 0402 have any ohm? Because some are 1.00 ohm and some are 9.99ohm

  • @MlnscBoo
    @MlnscBoo Рік тому

    I have a question, could you take a small wire brush wheel, say for a low rpm Dremel, to clean of the oxidation off the older tip?

  • @astroid9087
    @astroid9087 3 роки тому +1

    Can U solder 0402 instead of 0608 on the same board?

  • @zubershaikh5546
    @zubershaikh5546 3 роки тому +2

    Very nice component box

  • @PinoyTechTutorials
    @PinoyTechTutorials 2 роки тому +1

    great short tutorial! thanks alot!

  • @andygikling5786
    @andygikling5786 Рік тому +1

    This guy is Monet with that iron. Great video.

  • @박민홍-m4e
    @박민홍-m4e 2 роки тому

    May I ask what liquid you use before soldering?

    • @MatthRrrr
      @MatthRrrr Рік тому

      It's flux. It cleans the pad and helps solder spread to the whole pad (capillarity).

  • @johnathansawyer8736
    @johnathansawyer8736 Рік тому

    Could you show how to solder them to 30awg wire?

  • @danthegreat7590
    @danthegreat7590 3 роки тому

    First of all what size and shape tip do you use and where can i buy those tweezers

    • @XueMingYu
      @XueMingYu  3 роки тому

      Thanks for watching! I don't remember which tweezers did I use for the video. They are from the tweezers set of 6 I bought from Digikey. www.digikey.com/en/products/detail/aven-tools/18480TT/1953882

    • @wolu9456
      @wolu9456 2 роки тому

      Did your GF ever find your tweezers you bought?
      If so did she torture you with them? [just wondering if my ex was a special kind of evil or is it common behavior]

  • @TBD3.0
    @TBD3.0 4 місяці тому +1

    Impressive

  • @pieak4066
    @pieak4066 3 роки тому

    What is the dspic33ck board?

    • @XueMingYu
      @XueMingYu  3 роки тому

      It's a custom board...

  • @leso204
    @leso204 11 місяців тому

    And 'ping' we have reached orbit lol , (thats my effort)

  • @Jah_Rastafari_ORIG
    @Jah_Rastafari_ORIG Місяць тому

    Now, ask you grampa to do a different demonstration for us older people without steady hands...