I remember having a .049 Cox when I was a kid in the 60s. Must admit I don't have the same nostalgia for these tiny engines as they were really noisy, needed high nitro fuel that cost all of your pocket money and needed a huge 1.5V dry cell battery for the glow. The battery was very expensive for a youngster and ran down very quickly if you had trouble starting the engine. If you busted the glowplug then you had to buy a complete new cylinder head or glowhead as Cox called them.
I worked in a hobby shop as a kid, sold dozens of these @ $4.95. IIRC, the .010 came out later and went for $9.95. We're talking late '50s time frame. Jim
That looks similar to the one that came with my first control line plastic cox trainer approx 44 years ago, misty water colored memories! Thanks for the time jump back to my childhood Bruce!
Oh WOW! I remember the .020 and .049 from when I was a kid!! These little things ran great even if they did spew spent fuel all over the plastic model they were attatched to. Eventually they would pretty much desolve the model plane but for a while they made for some great fun! It's a shame that they aren't being produced any more.I even remember seeing them in some gas(nitro) powered cars..
Seeing your unboxing made me take a look and see if I could find the old Pee Wee my grandfather's bought for me. I did find it and it brought back some great childhood memories. Quiet for almost twenty years I'm certain I can make it go again.
This just brought back some nice memories. I still have seven cox engines from the early 1970s. I still have my first .049 from my first plane, it wasn't an RC but a tether plane, where you have your hand on the control line and spin around until you got dizzy lol.
Had one of those in my first control line plane from cox when i was a kid in the 70's. I remember the fun of trying to start it with that spring starter.
TheEPROM9 not a fun challenge, just a miserable challenge. multirotor props change speed constantly and drastically. gas engines can't support that kind of operation
I have a box of these. We marketed a free flight (first one) under TNT toys and used a Cox .020. When we got an order for 5,000 dozen Cox doubled the price of the .020 and put the line out of business in time to see Cox market their copy the next year. Yes, they were the .020 wars. It was just too expensive to build a replacement from scratch. I still have a TNT Mini-Chopper in the original shrinkwrap.
Still have the "baby bee!"... about 30 years ago I bought that... it never made it to an actual plane I'm sad to say... started it a couple of times though... but the pee wee... love it!
I have two of the R/C version NIP. The key to keeping the reed motors working smooth was ultra clean fuel and keeping the motor ultra clean. The tiniest bit of anything in the fuel system would either keep them from starting or make them run like crap.
Usually the tiniest bit of crap under the reed, and it wouldn't run worth a damn, IF at all. ANY time I had trouble keeping them running after the prime was gone, I went straight to cleaning under the reed. Fixed the issue 99% of the time. If an engine sat around for a while, and wouldn't run, taking the needle valve out and cleaning the gooped up passage out with a pin took care of that issue. The old fuel would turn gelatinous, and plug the tiny passage under the needle valve up. Other than those 2 things, these engines ran forever if they didn't end up ingesting dirt from a crash.
Yea, had 3 of these back in the old days still got 1 in its bubble pack never been used think I paid about £12 each for these, use to love the way if you removed the the starter spring you could run them in reverse due to their reed valve arrangement (so can be a puller or a pusher), only one problem with this motor was the gasket on the fuel tank would some times leek.
I can remember making flying shop rags with these tiny .020 engines after my buddies and I smashed our planes they were attached to, to bits, and they could no longer be repaired enough to fly anymore. I can't even COUNT the number of these I have lost when I put too much fuel in the shop rag version, and it ran too long and flew away WAY too far to find.... 🫤 I WISH I still had more than ONE left.. They were DIRT cheap back in the day. I can't even IMAGINE what the people who found my lost flying shop rags thought when they found them laying in their yards.. 😂
I remember the Cox .020 motor that came with the Cox all plastic airframe , control line spitfire. Probably in the early 70's. it was just too heavy to actually fly well but it was a great looking scale model and with the .020 installed it made its of noise.
I was 12 or so. Put one of these on a free flight glider. Last time I saw it, it was just a tiny spec in the sky. Too much fuel I reckon. First and last flight. Ran well. too well, too long.
Aint that it tho....? Would NEVER run that long or that well on the ground, but the INSTANT it left your hand, into the sky, they SUDDENLY ran REAL good, for WAY too long. 😵💫
I collect Cox engines as well and I have a couple .020's and a new in box .010. I got the 020's for about $25.00 each and the nib .010 for $75.00 on flea bay. I got lucky with one of those late night right place right time buy it now auctions. But I can remember when I was a kid, you could get an 010 for around 11 or 12 bucks, an 020 for about 8 bucks and 049 for about 5 or 6 bucks. I miss those days!!
If I recall correctly noise was the big issue. That was when they started banning flying at the local parks even control line, before RC. People didn't like being woke up on early Sunday mornings from all the buzzing at the school and local park. They later had mufflers for the .049, but didn't help much and hurt the top end power.
Hey Bruce, what hobby knife is that you are opening the box with? It looks identical to a "Racers Edge" branded one I bought, but probably overpaid for. Speaking of tools, that'd be a good video I think - having and overview of what basic tools a person might want to keep on hand for RC modeling.
I have a brand new one of these I got in a lot of parts about 10 years ago. It only has 1 little brass nipple on the back part...Not 2 like yours. No idea what model it is. I should probably try and find out so I can get it on eBay :)
I would love to see you fly something retro with the old escapement servos and radio rx units yuo showed us, the one button funky stuff. Do they still actually work?
My Video answer shows a plane which is designed to fly with a Cox PEE WEE .020. As you can see in one of my videos my COX PEE WEE does not run well because the needle is too thin so false air gets into the fuel air mix. So I use an electric engine to fly. I have some balsawood parts cut by a cnc milling machine, to built the LAStick plane. Do you want to have them?
Very cool Bruce. I would love to see a 100gm nitro, just the thought is awesome. I am currently putting together a 550mm balsa model and that little number would be nice on it.I always wanted to put together a tiny Cessna 180 with one of tholse back when $15 was a lot ($25 got you a nice big 0.25ci back then). Great little number Bruce.
nice, they are two stroke ...right. Would they run in either way (clockwise and counter clockwise if the spring and the propellers were reversed... I have 7 of these but have never been off the box they've been mine for 12 years now. Two medallion .049, One Tee Dee golden and one Hornet .049 I Believe, The others are regular sure start. Now that i have more time I am getting one pair of used Texaco and black widow converted to diesel i found on Ebay's auction . I am building a p-38 and a twin mustang model 1:43 and wanted to use these to power them. How would i make one run opposite of the other on these setup? Thanks your videos are awesome, very well explained and always good information. Gabriel
Yes, the reed valve ones do.. In fact, I've had them change direction right when they are running out of fuel, idling down to just about stopped, and then suddenly pick up thatvlast little bit of fuel in the tank and wake back up with a high-rpm lean burst for a second, going the OPPOSITE direction... Sucks when it happens to be an engine that is on a plane when THAT happens. My Shrike ground vehicle would just end up going backwards for a bit. No big deal, but, CAN'T fly a plane backwards.... 😵💫
I believe the larger engine is a Black Widow, Baby Bee's had half the tank size and a port difference. Just thinking about those rings my ears. I sold a large collector a few years ago a was blown away by the prices for both the 010/020 and the Cox KK (KustomKraftman) hand built modified racing .049/.051 engines. Had one KK .051 NIB with every mod option (open/enlarged venturi, lapped, ported, oversize crank, shims for head and cylinder, cc/pressure, plug mod, etc. paid $89 sold for $682 ,,wow
I wonder, can you still buy them cheap? Not necessarily original cox, but a clone perhaps? Im a sole electric flier, but id love to build a little cox plane just for novelty. The sound one of these makes must be magnificent.
I had a Cox Tee Dee .010 in the box that I bought brand new not long after they came out, it had been run a few times but never flown. Back in 2000 I was ill and off work for about a year and had to sell a bunch of my stuff, I think I sold it for $10 in the original box, its a shame I had to sell that stuff. I still have a Citizenship galloping ghost 3 channel REM radio, nobody would buy that back then.
I thought they were meant to run on some kind of blend of castor oil and methanol named "1/2A"? Plain nitro with synthetic oil gums them up supposedly.
If you make a balsa build from scratch, then you MUST make a video of that too.I have 5 models and a couple of plans, but only a sailplane finished and that look and fly horrible.Possible reason is body is not staight,so tail is not straight,and it doesnt have ailerons.If you make video,make sure you inklude every and i mean every step from start to finish,so those who have little to no experience in balsa build and want to follow can do so.look foreward to video of Rx,helix,diversity build too!
i first learnt to fly on a precedent high fly glider with a baby bee engine.it had to run about 15% nitro or it wouldnt get the plane up,i made a bigger tank so it would run for 15 minutes.eventually i couldnt get it to run right and there was play in the small end bearing so i binned it only to find out there was a reset tool,bugger
@RCModelReviews G'day Bruce.., Yay Team...! What a little Humdinger ! Um, back when wheels had flat sides all the was round them, there were Diesel, & Glowplug, Engines. Glow Plugs ignite Methanol catalytically ; some Rev-Heads added Nitro-Methane, but why do people these days call them "Nitro" motors ? The Nitro-Methane is optional. It's the Methanol which is definitive (no Kerosene & no Ether... & Castor Oil is ubiquitous)..? Bin-Wonderin'. Ciao !
Probably an Americanism, Bruce has been affected with a-loo-min-numb poisoning. Didn't throw all his old pots out when he was supposed to but does so occasionally with his toys.... ;p P.S. nitro is not optional on Cox engines.
You won't get a Cox to run on anything less than 15% Nitro and even better if you use 25%! Quite amazing that we played with this stuff as kids considering how poisonous Nitromethane is in high concentrations......happy days.
i was thinking about selling me pee wee since i have 0 use for it any longer...i would have sent it to you for only shipping costs..but now i shal wait to see what you do with this one so i may have a possible use for it.. LOL
I remember having a .049 Cox when I was a kid in the 60s. Must admit I don't have the same nostalgia for these tiny engines as they were really noisy, needed high nitro fuel that cost all of your pocket money and needed a huge 1.5V dry cell battery for the glow. The battery was very expensive for a youngster and ran down very quickly if you had trouble starting the engine. If you busted the glowplug then you had to buy a complete new cylinder head or glowhead as Cox called them.
I worked in a hobby shop as a kid, sold dozens of these @ $4.95. IIRC, the .010 came out later and went for $9.95. We're talking late '50s time frame.
Jim
They were less than that at the time. Something like 4 bucks
That looks similar to the one that came with my first control line plastic cox trainer approx 44 years ago, misty water colored memories! Thanks for the time jump back to my childhood Bruce!
Oh WOW! I remember the .020 and .049 from when I was a kid!! These little things ran great even if they did spew spent fuel all over the plastic model they were attatched to. Eventually they would pretty much desolve the model plane but for a while they made for some great fun! It's a shame that they aren't being produced any more.I even remember seeing them in some gas(nitro) powered cars..
Seeing your unboxing made me take a look and see if I could find the old Pee Wee my grandfather's bought for me. I did find it and it brought back some great childhood memories.
Quiet for almost twenty years I'm certain I can make it go again.
This just brought back some nice memories. I still have seven cox engines from the early 1970s. I still have my first .049 from my first plane, it wasn't an RC but a tether plane, where you have your hand on the control line and spin around until you got dizzy lol.
Had one of those in my first control line plane from cox when i was a kid in the 70's. I remember the fun of trying to start it with that spring starter.
I just flicked them with my finger. Never got bit by one. After a little experience, I could get them to start with one flick every time.
Had one of these back in the 70s early 80s on my first ever model, a tom thumb and then the minow glider,
things have come such a long way since then
Make a Quad with 4 of these. That would be a fun challenge.
TheEPROM9 Hell yeah
TheEPROM9 not a fun challenge, just a miserable challenge. multirotor props change speed constantly and drastically. gas engines can't support that kind of operation
I've seen 6...
3 on each wing... 😬
I've got a TD020 in my hand as I watch this. Friggin ADORABLE little engine.
The Pee Wee is even smaller
I have a box of these. We marketed a free flight (first one) under TNT toys and used a Cox .020. When we got an order for 5,000 dozen Cox doubled the price of the .020 and put the line out of business in time to see Cox market their copy the next year. Yes, they were the .020 wars. It was just too expensive to build a replacement from scratch. I still have a TNT Mini-Chopper in the original shrinkwrap.
Still have the "baby bee!"... about 30 years ago I bought that... it never made it to an actual plane I'm sad to say... started it a couple of times though... but the pee wee... love it!
I still have one of those new in the original box. Which size of prop should be used at sea level?
Thanks for the videos Bruce!
Tornado start at 5 X 3 .Trev New Zealand
I have two of the R/C version NIP. The key to keeping the reed motors working smooth was ultra clean fuel and keeping the motor ultra clean. The tiniest bit of anything in the fuel system would either keep them from starting or make them run like crap.
Usually the tiniest bit of crap under the reed, and it wouldn't run worth a damn, IF at all.
ANY time I had trouble keeping them running after the prime was gone, I went straight to cleaning under the reed. Fixed the issue 99% of the time. If an engine sat around for a while, and wouldn't run, taking the needle valve out and cleaning the gooped up passage out with a pin took care of that issue. The old fuel would turn gelatinous, and plug the tiny passage under the needle valve up. Other than those 2 things, these engines ran forever if they didn't end up ingesting dirt from a crash.
Yea, had 3 of these back in the old days still got 1 in its bubble pack never been used think I paid about £12 each for these, use to love the way if you removed the the starter spring you could run them in reverse due to their reed valve arrangement (so can be a puller or a pusher), only one problem with this motor was the gasket on the fuel tank would some times leek.
I can smell the caster oil already. Memories ..... :-))
I can remember making flying shop rags with these tiny .020 engines after my buddies and I smashed our planes they were attached to, to bits, and they could no longer be repaired enough to fly anymore.
I can't even COUNT the number of these I have lost when I put too much fuel in the shop rag version, and it ran too long and flew away WAY too far to find.... 🫤
I WISH I still had more than ONE left..
They were DIRT cheap back in the day.
I can't even IMAGINE what the people who found my lost flying shop rags thought when they found them laying in their yards.. 😂
i have 2 .020s i got for free from my dad and they run! they are just the coolest thing ever!
They used to come on a bubble pack card for $4.95... that was back in 1964.
I remember the Cox .020 motor that came with the Cox all plastic airframe , control line spitfire. Probably in the early 70's. it was just too heavy to actually fly well but it was a great looking scale model and with the .020 installed it made its of noise.
They used a bigger babe bee 049 engine
I was 12 or so. Put one of these on a free flight glider. Last time I saw it, it was just a tiny spec in the sky. Too much fuel I reckon. First and last flight. Ran well. too well, too long.
Aint that it tho....?
Would NEVER run that long or that well on the ground, but the INSTANT it left your hand, into the sky, they SUDDENLY ran REAL good, for WAY too long. 😵💫
where did I buy it
I've had one or two of these since the late 70s. I read somewhere they are the highest revving internal combustion engine ever made.
I've got 1 & its my Dad's bought in the early 1960s & in it's blister pack it's NOS & I am in New Zealand too.Its not for sale though.best wishes.
I collect Cox engines as well and I have a couple .020's and a new in box .010. I got the 020's for about $25.00 each and the nib .010 for $75.00 on flea bay. I got lucky with one of those late night right place right time buy it now auctions. But I can remember when I was a kid, you could get an 010 for around 11 or 12 bucks, an 020 for about 8 bucks and 049 for about 5 or 6 bucks. I miss those days!!
They were around 4 bucks when I was buying them new by the handfuls... I WISH it was still like that
Bruce, will you do a build video of your little balsa plane?
If I recall correctly noise was the big issue. That was when they started banning flying at the local parks even control line, before RC. People didn't like being woke up on early Sunday mornings from all the buzzing at the school and local park. They later had mufflers for the .049, but didn't help much and hurt the top end power.
Those people can BLOW me....
These are the same ones that will run a gas leaf blower for 3 hours on a Sunday afternoon in their yards though.... 😮💨
Hey Bruce, what hobby knife is that you are opening the box with? It looks identical to a "Racers Edge" branded one I bought, but probably overpaid for.
Speaking of tools, that'd be a good video I think - having and overview of what basic tools a person might want to keep on hand for RC modeling.
I have a brand new one of these I got in a lot of parts about 10 years ago. It only has 1 little brass nipple on the back part...Not 2 like yours. No idea what model it is. I should probably try and find out so I can get it on eBay :)
I didn't know that Cox still exist. I thought it long gone.
I would love to see you fly something retro with the old escapement servos and radio rx units yuo showed us, the one button funky stuff. Do they still actually work?
I love how this guy is so interested in what he does. :)
Tiny glow plug engines are so cool
I did almost the same thing with a much bigger engine, James. In my case, the neighbors got really mad.
My Video answer shows a plane which is designed to fly with a Cox PEE WEE .020. As you can see in one of my videos my COX PEE WEE does not run well because the needle is too thin so false air gets into the fuel air mix. So I use an electric engine to fly. I have some balsawood parts cut by a cnc milling machine, to built the LAStick plane. Do you want to have them?
Very cool Bruce. I would love to see a 100gm nitro, just the thought is awesome. I am currently putting together a 550mm balsa model and that little number would be nice on it.I always wanted to put together a tiny Cessna 180 with one of tholse back when $15 was a lot ($25 got you a nice big 0.25ci back then). Great little number Bruce.
nice, they are two stroke ...right. Would they run in either way (clockwise and counter clockwise if the spring and the propellers were reversed... I have 7 of these but have never been off the box they've been mine for 12 years now. Two medallion .049, One Tee Dee golden and one Hornet .049 I Believe, The others are regular sure start. Now that i have more time I am getting one pair of used Texaco and black widow converted to diesel i found on Ebay's auction . I am building a p-38 and a twin mustang model 1:43 and wanted to use these to power them.
How would i make one run opposite of the other on these setup?
Thanks your videos are awesome, very well explained and always good information.
Gabriel
Yes, the reed valve ones do..
In fact, I've had them change direction right when they are running out of fuel, idling down to just about stopped, and then suddenly pick up thatvlast little bit of fuel in the tank and wake back up with a high-rpm lean burst for a second, going the OPPOSITE direction... Sucks when it happens to be an engine that is on a plane when THAT happens.
My Shrike ground vehicle would just end up going backwards for a bit. No big deal, but, CAN'T fly a plane backwards.... 😵💫
Just start it up backwards.... ONLY reed valve engines though. The front venturi engines will run backwards, but not very well at all.
dude i didnt even know they made engines that small
I believe the larger engine is a Black Widow, Baby Bee's had half the tank size and a port difference. Just thinking about those rings my ears. I sold a large collector a few years ago a was blown away by the prices for both the 010/020 and the Cox KK (KustomKraftman) hand built modified racing .049/.051 engines. Had one KK .051 NIB with every mod option (open/enlarged venturi, lapped, ported, oversize crank, shims for head and cylinder, cc/pressure, plug mod, etc. paid $89 sold for $682 ,,wow
I wonder, can you still buy them cheap? Not necessarily original cox, but a clone perhaps?
Im a sole electric flier, but id love to build a little cox plane just for novelty.
The sound one of these makes must be magnificent.
OMG, that's way smaller than my .049!!! Didn't think it was that small
The .010's were really tiny
WOW, haven't seen that in an age, my father had one for a plane kit!
Wow, ain't that a blast from the past! Bruce, you seemed a tad excited to get this little wonder?
They're actually back in production.
Takes me back to my youth lol....
Be nice to see you do a scratch build video for that motor Bruce. :)
Oh my god! The last time I say one of those it was in a free flight Ugly Stick with the wind taking it over the woods. I was in 6th grade.
I had a Cox Tee Dee .010 in the box that I bought brand new not long after they came out, it had been run a few times but never flown. Back in 2000 I was ill and off work for about a year and had to sell a bunch of my stuff, I think I sold it for $10 in the original box, its a shame I had to sell that stuff. I still have a Citizenship galloping ghost 3 channel REM radio, nobody would buy that back then.
hey,,,, what happen with the hobbyking turbine??
Nice video. how do you determine the right engine /prop size for a given model airplane weight.
Thanks.
Bought the Cox recc or a 5 X3 tornado ,the yellow ones - when they wind out you know their proper right.Trev New Zealand
Sorry that's for the Cox .020"
I remember these they were great, but noisy :-) I wish you luck on flying it, it should be intresting in your choice of model, maybe a delta wing ?
Much quieter than a .32 in an 1/8th scale buggy with a good tuned pipe.
can they turn clock and counterclockwise?
Yes. They can run in both directions.
I thought they were meant to run on some kind of blend of castor oil and methanol named "1/2A"? Plain nitro with synthetic oil gums them up supposedly.
Have you ever had a cox diesel
do you mix oil with the nitro fuel and what oil do you use
Yes you do have a lot of things to do! I have been anxiously awaiting more of your great info on electric motors, just saying haha....
I ran mine on rc car fuel like 40-60% They need high nitro to run good
NOT enough oil in car fuel, you'll burn it up. They NEED alot of castor oil. Synthetic oil does them no good
@@davelowets nope, I ran mine for years.
I have that engine new and 4 of the .010 new in box but my favorite is my 2 new .049 venoms in box
Old !! hey i'm mid 30's and have 20x 0.049 and 5x 0.020 in a box, maybe i should put them up for sale ?
"Flash" scale, Bruce. Did you give in to all the complaints about your epoxy covered one?
back in he day, now i remember my first powered model. O shit! that means I am getting old
Old pepole im12 and i love these things
I am looking forward to see and listen to it. Btw. do you live at an airfield? I can hear GAs in the background :-)
Cool. I found one yesterday. New for 25 us
please make that plane!!!!!!!!!! i'd love to see a video!
Never used I love cox!!! Not like that damit lolol
how can i get them..........??
Safer eBay or if in USA Craigslist.Hope this helps.Trev New Zealand
whats better, gas or electric motors?
I had a helicopter with that engine when I was young.
Great review!
If you make a balsa build from scratch, then you MUST make a video of that too.I have 5 models and a couple of plans, but only a sailplane finished and that look and fly horrible.Possible reason is body is not staight,so tail is not straight,and it doesnt have ailerons.If you make video,make sure you inklude every and i mean every step from start to finish,so those who have little to no experience in balsa build and want to follow can do so.look foreward to video of Rx,helix,diversity build too!
It's really cute!
Me too! Tons of fun lol!!
Hammer time?
i first learnt to fly on a precedent high fly glider with a baby bee engine.it had to run about 15% nitro or it wouldnt get the plane up,i made a bigger tank so it would run for 15 minutes.eventually i couldnt get it to run right and there was play in the small end bearing so i binned it only to find out there was a reset tool,bugger
Nightflyyer used those small motors for flying rags :)
Cox Engines were amazing pieces of micro engineering. They manufactured a staple in the hobby community. Shame they went the way of the dodo.
@RCModelReviews
G'day Bruce.., Yay Team...! What a little Humdinger ! Um, back when wheels had flat sides all the was round them, there were Diesel, & Glowplug, Engines. Glow Plugs ignite Methanol catalytically ; some Rev-Heads added Nitro-Methane, but why do people these days call them "Nitro" motors ? The Nitro-Methane is optional. It's the Methanol which is definitive (no Kerosene & no Ether... & Castor Oil is ubiquitous)..? Bin-Wonderin'. Ciao !
Im holding my Cox .049 flightmaster as i watch this
I have that exact same motor but mine is all silver with a brass colored back
Heh, it's almost a piece of jewellery!
Probably an Americanism, Bruce has been affected with a-loo-min-numb poisoning. Didn't throw all his old pots out when he was supposed to but does so occasionally with his toys.... ;p
P.S. nitro is not optional on Cox engines.
Buenas noches encontré un motor Cox pee wee, al principio no sabía de que era, quiero saber cómo prenderlo
You won't get a Cox to run on anything less than 15% Nitro and even better if you use 25%! Quite amazing that we played with this stuff as kids considering how poisonous Nitromethane is in high concentrations......happy days.
Pretty cool
Its funny the whole 'can you guess what it is yet?' but it says in the title...
I have the .010 in box it's in in a plexey glass case!!!!!
BRILLIANT!!!! I cracked up!!
how much Price
you say nitro but does it run on nitro fuel ? and what %%% nitro
Awww.. I remember these.. Thought they died out ages ago.
"What is it?!!".... I think the title gives it away....
Hear it but you can not see it?
Classic!!!!
Good vid thanks
Thanks
i buyed surestart cox 0.49 for 30$
i was thinking about selling me pee wee since i have 0 use for it any longer...i would have sent it to you for only shipping costs..but now i shal wait to see what you do with this one so i may have a possible use for it.. LOL
How to buy
haha, bet that woke you both up then.. :-)