If you haven't finished the roof yet. Its a good idea to remove the rear window panel (its plastic and is held on by rivets) because if the vinyl failed, water could have got in and pooled where the back panel and body meet on the trunk mechanism crossmember. I pull the roof off mine and the crossmember was screwed to the point where the rear window was holding together what was left.
Yea... Find a woody delete roadmaster wagon! RARE... Or an olds Custom Crusier like I have,, But they are slow with the TBI engine. the 350 TBI isnt too bad though.. Dynomax Ultraflows sound cool on the LT1. I have them on my impala.
wanna come up to canada and do that to my buick? lol just kidding i didnt think their was any problems with ur vynal top, it looked super clean in ur other vids of ur caddy i always wondered what it might look like if i ever striped the vynal top off i hope u make a vid on installing ur new one on! great video bogar! looking foward to ur new vids on ur caddys!
well if its a caprice i would be the classic but me oh the roadmaster wagon i just gotta have! its the ultimate sleeper AND you can haul lots of stuff in it! just slap some f-body heads, make it a true dual exhaust oh i would love to have one!
@hamppu89 no, i don't drive my speedboat 40000km/ year, and i won't do that in a Cadillac Brougham eather cuz it is a Summer/ enthusiast vehicle. BUT i used 500l of gas last summer, that was more then my dad re-fueled his car with over the whole summer! and, for me, fuel is cheap:) i have alredy started to save up for a caddy brougham, soon enough
@hamppu89 lol, i am 16 years old, i've got a speed boat, it takes 10litre/10km. The gas prise in sweden is the same as there you are. that's np, the gas is practical not more expensive today than it was 50 years ago, you earns a lot more now than 50 or 30 years ago. if you look at the avarege salary 40 years ago and compare with the gas prise, it's more cheap now tha then! so, fuel prize, don't think about it! :)
@j45007, I'm replacing everything because its all bad. The car would wander all over the road, so i checked and all the bushings, ball joints tie rod ends are bad. I am getting new control arms and springs too. As of right now everything is apart, I am just waiting on the control arms to get the project finished.
@tjampe Well, it is not so cheap at least for me (only i will pay the gas :( and my work distance is so long) and keeping 6 cars is not so cheap. When my current BMW project is somewhat ready, i will buy antoher. I have couple choises: Cadillac Brougham, BMW 750iAL E-32 or import Toyota Soarer/Nissan Stagea. I don`t know how long by current project will take because i have been busy with research projects and studies. Hopefully in couple of years.
@romeroremor well with all these gasoline running in my veins i would say true duals with flowmasters! or maybe the ory with the slp loudmouth that would scare the kids in their plastic lunchboxes!
Hmm. I was thinkig of buying a Brougham for a summer car/project car. I love the styling! Too bad that the gas price in here is about 1.45€ or 1.7$ per litre!
hi i have a 92 geo metro that i lengthened and turned into a limosuine, now alll i have to do is paint it and i also want to put a vynil top on it but dont have a clue as to where to find material,
Do you drive with your speedboat 40000km/year? Yes, in sweden the gas price is at the same level. If you only look at the average salaries that don`t work. It is true that money value has changed over the years and gas was cheap, but you just cant`t compare them so easily. Today living expences and other things are more expensive than wat it was in the 70s/60s. Also taxes etc. And in the future gas price will change because biofuels are more expensive. (thinking of doing my M.Sc about biofuels.
arlington TX assembly sticker on th qr window cool.
Cool!
Looks like a lot of work.
If you haven't finished the roof yet. Its a good idea to remove the rear window panel (its plastic and is held on by rivets) because if the vinyl failed, water could have got in and pooled where the back panel and body meet on the trunk mechanism crossmember. I pull the roof off mine and the crossmember was screwed to the point where the rear window was holding together what was left.
Yea... Find a woody delete roadmaster wagon! RARE... Or an olds Custom Crusier like I have,, But they are slow with the TBI engine. the 350 TBI isnt too bad though.. Dynomax Ultraflows sound cool on the LT1. I have them on my impala.
Nice job!
wanna come up to canada and do that to my buick? lol just kidding
i didnt think their was any problems with ur vynal top, it looked super clean in ur other vids of ur caddy
i always wondered what it might look like if i ever striped the vynal top off
i hope u make a vid on installing ur new one on!
great video bogar! looking foward to ur new vids on ur caddys!
well if its a caprice i would be the classic but me oh the roadmaster wagon i just gotta have! its the ultimate sleeper AND you can haul lots of stuff in it! just slap some f-body heads, make it a true dual exhaust oh i would love to have one!
@hamppu89 no, i don't drive my speedboat 40000km/ year, and i won't do that in a Cadillac Brougham eather cuz it is a Summer/ enthusiast vehicle. BUT i used 500l of gas last summer, that was more then my dad re-fueled his car with over the whole summer! and, for me, fuel is cheap:) i have alredy started to save up for a caddy brougham, soon enough
Wow, can't wait to see the finished product! That looks like a big project you've got going there. I just started tackling the front end on my 91.
@hamppu89 lol, i am 16 years old, i've got a speed boat, it takes 10litre/10km. The gas prise in sweden is the same as there you are. that's np, the gas is practical not more expensive today than it was 50 years ago, you earns a lot more now than 50 or 30 years ago. if you look at the avarege salary 40 years ago and compare with the gas prise, it's more cheap now tha then! so, fuel prize, don't think about it! :)
I wish I had a Fleetwood. All I got is a terrible 99 Riviera.
Great job BOGAR! Keep up the great work on the Caddy! :D
Can't wait to see the finish product of your hard work!
@j45007, I'm replacing everything because its all bad. The car would wander all over the road, so i checked and all the bushings, ball joints tie rod ends are bad. I am getting new control arms and springs too. As of right now everything is apart, I am just waiting on the control arms to get the project finished.
Can't wait to see the Caprice Classic...I love those cars!
@tjampe Well, it is not so cheap at least for me (only i will pay the gas :( and my work distance is so long) and keeping 6 cars is not so cheap. When my current BMW project is somewhat ready, i will buy antoher. I have couple choises: Cadillac Brougham, BMW 750iAL E-32 or import Toyota Soarer/Nissan Stagea. I don`t know how long by current project will take because i have been busy with research projects and studies. Hopefully in couple of years.
i thought the white stuff was ice for a second.
@romeroremor well with all these gasoline running in my veins i would say true duals with flowmasters! or maybe the ory with the slp loudmouth that would scare the kids in their plastic lunchboxes!
Hmm. I was thinkig of buying a Brougham for a summer car/project car. I love the styling! Too bad that the gas price in here is about 1.45€ or 1.7$ per litre!
hi i have a 92 geo metro that i lengthened and turned into a limosuine, now alll i have to do is paint it and i also want to put a vynil top on it but dont have a clue as to where to find material,
oh wow the top looks like as if it was moldy lol.
Do you drive with your speedboat 40000km/year? Yes, in sweden the gas price is at the same level. If you only look at the average salaries that don`t work. It is true that money value has changed over the years and gas was cheap, but you just cant`t compare them so easily. Today living expences and other things are more expensive than wat it was in the 70s/60s. Also taxes etc. And in the future gas price will change because biofuels are more expensive. (thinking of doing my M.Sc about biofuels.
i havethe same car and i want black vinyl, what would it cost me??
Looking good there J!; cant wait to see more of this baby once u get more of it completed!!!: keep working on it man! :)
Man The Lacing Has Come Undone On The Corner Of My Rag Top Can It Be Fixed Or Will I Have To Replace The Whole Thing
Which caprice are you getting? is it the one with the lt1 engine! that would be awesome!
Where can i order the"close cell" material from? These videos are a God send right now for me
Thats how a man opens his mail
I'm wanting to replace the landau bars on my '70 Eldorado but can't seem to find any place online selling them used or new.
Any suggestions?
Nathan go to les Dunham coach website he has the bars & many other accessories for customizing Cadillacs such as superflly headlight kits
Bro'hams...:D
Where did you get the new vinyl top for that Brougham? I can't find any parts for my 91
Damn, that looks nasty under!!! but I'm sure it will look like new when you recover it :D
Where did u buy the new top at???
spray some water on those howling kids...
Plot-twist: Those kids are his...
I hate vinal tops.