Rx-D User Guide 4.2 Single Channel Pairing

Поділитися
Вставка
  • Опубліковано 9 лип 2019
  • 4.0 EASY PAIRING
    Before the Rx-D can be used wirelessly it must first be paired with the users uniquely coded Txi-Ds. Use Single Channel Pairing to pair Txi-Ds with the preferred Rx-D channel LED colour. Use Multi-Channel Pairing to pair up to 4 Txi-Ds with one Rx-D channel LED colour differentiated visually by 1-4 flashes.
    4.1 HOW TO PAIR - First ensure that the Rx-D & Txi-Ds to be paired are all switched OFF. Set Responses to a low level and Volumes to medium. Important - The Rx-D will switch itself OFF automatically with nothing memorised if at any stage of Easy Pairing there is a
    delay of more than 45 seconds or if Easy Pairing is not completed. If an error is made before Pairing Completion switch OFF manually or wait for automatic switch OFF. Recommence Easy Pairing.
    4.2 SINGLE CHANNEL PAIRING - Switch the Rx-D ON. The Purple LED flashes continuously indicating Single Channel Pairing Mode. If the Purple Channel is to be paired, switch ON the first Txi-D within a metre of the Rx-D to transmit the code. If the Purple Channel is not to be paired, press and release PB1 until the required channel LED flashes and switch on the appropriate Txi-D. When the code is accepted, it is confirmed audibly and the next channel’s LED will start flashing.
    Note - The Rx-D will only allow pairing with one unique Txi-D code at a time. Any further transmissions of the same code will result in an audible error message. Continue pairing as required and complete by pressing and releasing PB1 through all LED channels (including Yellow) until Pairing Completion is confirmed.
  • Спорт

КОМЕНТАРІ • 11

  • @guggsdusty3674
    @guggsdusty3674 3 роки тому +2

    Well
    txi-D’s arrived today and all I can say is what a fabulous piece of kit they are . I had my doubts when I first saw them but having seen them in the flesh that are fabulous. The old txi’s are brilliant but these d’s are a different animal.
    Well done all at Delkim.
    Stunning !!

  • @nathangousseau6869
    @nathangousseau6869 4 роки тому

    hello it is to know if with the detectors delkim txi d we can change the color of the detectors as we want pasque on the sites it put 3 detectors delkim txi d blue with central rx d

    • @DelkimLtd
      @DelkimLtd  4 роки тому

      The LEDs are fixed colours.

  • @ingoschiff9830
    @ingoschiff9830 4 роки тому

    Ich kann meine txi d nicht verbinden. Obwohl ich nach dem Video gehe. Kann jemand helfen? liebe Grüsse Ingo

  • @briain_odonnghaile
    @briain_odonnghaile 6 місяців тому

    Will my standard plus pair with this receiver please?

    • @DelkimLtd
      @DelkimLtd  6 місяців тому

      no this is a completely different digital system and the Standard Plus has no radio built in anyway.

  • @pieterbrepoels6563
    @pieterbrepoels6563 3 роки тому +1

    Can you connect 2 blue txi-d to the receiver

    • @DelkimLtd
      @DelkimLtd  3 роки тому

      Yes you can pair any colour to any channel

    • @brianlee8384
      @brianlee8384 Рік тому

      Can you put all 3 alarms on the same led I have 3 blue alarms and I would like to have them all on the blue led on the receiver

  • @pauljackson6599
    @pauljackson6599 5 років тому

    Still rather my good old TXI alarms how meany Village idiots are going to run out to get them 😂😂😂😂😂