Installed Several Accessories on my 2023 Harley Davidson Breakout Part 1
Вставка
- Опубліковано 2 жов 2024
- Quick install video of several accessories for my 2023 Harley Davidson Breakout.
Parts I have installed so far:
LA Choppers LA-7413-72 Riser - amzn.to/3vC4UvL
Headlight Fairing - amzn.to/3I0XsNn
Chin Spoiler - amzn.to/3HULdlB
Coil Cover - Part Number: 57300214
Empire Small Rear Brake Pedal Pad - Part Number: 50600459
Empire Large Footpegs - Part Number: 50501855
Front Signature LED Turn Signal - Part Number: 67801148
Rear Signature LED Turn Signal - Part Number: 67801329
Screamin Eagle 10MM Phat Spark Plug Wires - Part Number: 31600112
How tall are the stock handlebar risers on the new breakout 117? Are those 6 inch risers, 5.5, 4? Im trying to plan for my Breakout purchase so the dealer can put it on while it's there. I didn't realize they were so tall which messed up my plans for the 10 inch fused lo bars which will be way too tall with those risers. I want a total rise of 12 inches including risers. I want a frisco style mini ape type bar but I think it needs to be 1.25 inch thick and only 6 inch rise depending on height of those risers. My handlebar search just got much more complicated dangit!! I don't want to change out stock risers cuz I wanna preserve as much stock parts as possible and only change a few things on the bike.
Be sure to sync the new led lights with the BCM or you will get rapid flashes and BCM codes. Harley-Davidson doesn’t put that in the instructions.
Flashes are all normal. have not seen any fast flashing. Had the same setup on my Road Glide and did not have to do anything with BCM.
Nice
The instructions say to remove the fuel tank, I can’t seem to get the covers on the right hand side out ? You seemed to just pull them ? Although you didn’t show it and it was in fast forward. 🤷🏻♂️
Yes I was able to pull them through. No need to lift the fuel tank
Nice garage brother. I had mine set up nice even painted the walls in Harley colors and did the epoxy floor with the flakes, sold the house a few years later and just renting now, hoping to buy a new place this year so I have a garage for my rides.
Thank you! Good luck with the new hose purchase 👍
Hey Lenny... I have a 2023 Breakout in Baja Orange. I'm liking the upgrades you made to your Breakout! I looked in my catalog for the parts you installed, but not sure if I was able to locate the exact parts you used. Is it possible for you to post the part numbers of the parts you used? Thanks! John...
Yes will do. I’ll put a list of parts together and put them in the description of the video shortly.
Thank You Lenny!!!!
Looks good..What's the part number for the rear LED inserts?
Thanks. I put all the part numbers in the description of the video but here it is 67801329.
In am struggling with installing the wires? The two longest wires are where I’m at. Do I need to remove the tank or a special tool?
I did not have to do anything with the tank. It’s a little tight but very doable.
@@LennyK I removed two screws to the tank (top and bottom) just to raise the tank enough to create space to get those last two wires outs it worked!
@@rjcastaneda374 Great!
What do you use to wash and protect the matte black paint on your Breakout? I almost got the Black Denim but went with Vivid Black for mine, I didn't want to deal with special soaps to wash it.
Believe it or not it's actually very easy to maintain, as long as you don't scratch it. Regular wash and denim detailer. Thats it!