TOOLS I USE TO REPAIR ATX MAINBOARDS THAT YOU WILL NEED!
Вставка
- Опубліковано 12 вер 2024
- If you have any questions hit me up in the comments!
/ mainboard_medic
My Tools:
DDR3 and DDR4 Post code tester (white ddr card): s.click.aliexp... *
Tweezers: de.aliexpress....
Soldering Station AIXUN T3A T245 B Set: de.aliexpress....
JBC tips that i use: C245-906 (bought of a german retailer) , C245-030 (bought of a german retailer) , C245-908 amzn.to/47eHP05 * , C245-752 amzn.to/47BqxtO *
PCIE Post Card: s.click.aliexp... *
Side Cutters: de.aliexpress....
DDR3 DDR4 Data line Tester: s.click.aliexp... *
Pre heater: s.click.aliexp... *
Reball jig: s.click.aliexp... *
needle probes: s.click.aliexp... *
CH341A Bios chip programmer: s.click.aliexp...
Soder Wick: s.click.aliexp... *
Microscope: s.click.aliexp... *
Microscope Ringlight: s.click.aliexp... *
Microscope Arm (used 3D printing to make it work, can provide an STL if needed): amzn.to/3R1hn48 *
Power supply: s.click.aliexp... *
12V to 24pin ATX adapter: s.click.aliexp... *
Components Tester: s.click.aliexp... *
Hot Air: Some Quick 861DW counterfeit
The Flux i use sucks, so dont buy it lol
The Copper wire i use is 0.1mm Enameld wire, link is dead, but the wire wasnt great anyways
Oscilloscope RIGOL DS1054Z amzn.to/3R2aDmE *
Thermal Camera Seek Compact amzn.to/47hGeX6 * (I would check out the infiray P2 Thermal cameras to be honest if i wouldnt have already bought this one!)
Multimeter (cheap one for beginners, that i still use): UEZNIRN IEC61010-1 multimeter
UV light: amzn.to/40L0fD1 *
Links marked with * are affiliated links and i get a small comission from them without you paying extra. (The * is not part of the link)
For any business inquierments:
Xorat.business@hotmail.com
Thank you for the tour of your work bench. Lots of innovations to get the job done. 👍
This video go to my favorite videos playlist. Thank you.
I've been experimenting with a few of those 12v mining/pico psu for my computer, I got a 360 Watt one and it just passes 12 volts straight through to the motherboard so be careful with what voltage you give it and I'll be interested in seeing the output voltage ripple/quality oscilloscope test if you get time
What a great video. Very helpful with all your experience.
Thank you for explaining the tools you use! Love it!
Great video! Well done
That is video what I need 🔥! Thank you.
Thank you sir ❤❤
I really love this channel
PLEASE what pins on the header do you connect to with your bios adapter cables
thank you
great content, thank u for sharing
Helpfull video sir ❤
Nice !
Do you have a Link to the Russian DDR4 Memory tester that has the leds only if there's a problem?
Sadly there is not just a shop where you can get it. If there would be, i would have already gotten it!
Hi nice stuff, description is empty. could you please add the links?
Check again, you need to open it up, there are the links. There are newer ones on my latest videos!
@@MainboardMedic your are right, bit in my phone, on my home computer is not visible. Thanks :) (nice videos, i have discovered your Chanel today :) )
Great videos my man ! Love watching them.. Any chance you can link the Russian version of the DDR4 tester ? I bought the same one as yours and the text on the board is really bad.. cannot read anything and makes the device useless.
The site is called ozon.ru and you need to google for DDR tester!
@MainboardMedic Thanks Brother... I don't think I can buy from them... I'm in Australia
@MainboardMedic Just as i suspected. I cannot buy from them. I have sent you a PM
Hello 🤝 great equipment and great videos, best regards👍👍👍👍👏👏👏👏👏👋👋👋👋👋P.S. I wanted to ask if you have ever had experience with a Gigabyte aourus B450 pro board with error code 15, the board does not go through the post procedure, what do you think about it, could it be the BIOS?
Erorr Code 15 is quiet early in the chain. I would expect 00 if the Bios would be dead. I would check the voltages first on the board, exspecially around CPU and RAM and if they are all present, flashing the Bios would be an option!
24pin DC ATX PSU 12V DC Input 250W Peak Output Switch DC-DC ATX Pico PSU Mini ITX PC Power
No heating plate? Got a dead z390 aorus master that I suspect has a dead chipset but don't have a thermal camera, from what I understand there shouldn't be any shorted caps on the chipset and I have a few shorted ones. Ordered a cheapo 7$ heating plate from Aliexpress, still waiting for it, will try on some dead boards before going for the chipset.
I do have a preheater, that was about 100€, but its too small for Mainboards. Ive had a BGA station before and what i encountered was, that if you want to do anything BGA related on Mainboards like the socket or Chipset you need to preheat the whole board and not just the area where you want to work on, because the warping gets to bad and then chipsets and sockets wont lay flat anymore. But i would be interested in your results!
@@MainboardMedic thank you for the answer and the important detail about warping, lol you understood me without me even telling you the whole story, Nice 👍. Will definitely try on a crappy dead board and not the master. Bga station is very expensive, not for home use, yeah now that I think about it the guy I watched changing a chipset used a huge preheater, well guess the 7$ heater won't do but might still try on a crappy board
You can defenetly get some experience with a crappy board and try some things. @@Roman00744