Hiya, I ordered mine from Mouser electronics www.mouser.co.uk/ProductDetail/EPCOS-TDK/B72527G3200K000?qs=dEfas%2FXlABIgCX4mFnPbQw%3D%3D&_gl=1*yffyxj*_ga*MTE0ODM2OTI1MS4xNzE2NTM1NjQ1*_ga_15W4STQT4T*MTcxNjUzNTY0NC4xLjAuMTcxNjUzNTY0NS41OS4wLjA.
I picked up a new complete motor from Ebay but it does not have the round disc with the 9 holes (video at 11:49). Can I remove the from old unit and install in new motor? If so how did you remove that disc with out breaking it? Thanks
bonjour tres bonne video ou avez vous trouver ce composant malgrer mais recherche impossible de trouver quoi que ce sois de ressemblant §§ merci d'avance !!!
Hiya, I ordered mine from Mouser electronics www.mouser.co.uk/ProductDetail/EPCOS-TDK/B72527G3200K000?qs=dEfas%2FXlABIgCX4mFnPbQw%3D%3D&_gl=1*yffyxj*_ga*MTE0ODM2OTI1MS4xNzE2NTM1NjQ1*_ga_15W4STQT4T*MTcxNjUzNTY0NC4xLjAuMTcxNjUzNTY0NS41OS4wLjA.
Hydraulic cylinders or motor? If cylinders it needs to be rebuilt with new gaskets etc. using a company called Top Hydraulics...cheapest option. Most expensive options is to buy a new one from BMW which cost 1k USD per cylinder.
with multimeter connect plus and minus terminal and try spinning it manually. if it works you should get an ohm reading that goes up and down while it turns
I just connected it with battery charger to positive and negative terminal for a second. If i hear the motor spins it's working. it might not be the best way to test it without connecting to the car.
Thank you so much Brother, This video was very helpful. I will be fixing mine myself soon
Hope you managed to fix yours. Happy if I could help 👍
Awesome video! I have similar issue with the capacitor. Can you share the link where did you order it?
Hiya, I ordered mine from Mouser electronics www.mouser.co.uk/ProductDetail/EPCOS-TDK/B72527G3200K000?qs=dEfas%2FXlABIgCX4mFnPbQw%3D%3D&_gl=1*yffyxj*_ga*MTE0ODM2OTI1MS4xNzE2NTM1NjQ1*_ga_15W4STQT4T*MTcxNjUzNTY0NC4xLjAuMTcxNjUzNTY0NS41OS4wLjA.
@@fitlerofficial thanks mate. I've solved my issue by restoring the old one. Just scratch isolation a bit and solder new wires to the contacts.
Great stuff😊
Many thanks 🙏
Merci
I picked up a new complete motor from Ebay but it does not have the round disc with the 9 holes (video at 11:49). Can I remove the from old unit and install in new motor? If so how did you remove that disc with out breaking it? Thanks
bonjour tres bonne video ou avez vous trouver ce composant malgrer mais recherche impossible de trouver quoi que ce sois de ressemblant §§ merci d'avance !!!
Hiya, I ordered mine from Mouser electronics www.mouser.co.uk/ProductDetail/EPCOS-TDK/B72527G3200K000?qs=dEfas%2FXlABIgCX4mFnPbQw%3D%3D&_gl=1*yffyxj*_ga*MTE0ODM2OTI1MS4xNzE2NTM1NjQ1*_ga_15W4STQT4T*MTcxNjUzNTY0NC4xLjAuMTcxNjUzNTY0NS41OS4wLjA.
its cheaper to get a new motor, then investing your time into rebuilding one. thats awesome that u can do it tho, nice man!!!
100% agree. It is cheaper, but I was curious what is inside and if I can make it run again.
It's not about the cost, it's about the satoyou get from being able to make something work again
Bonjour j ai une fuite d huile sur l hydraulique..avez un conseil pour cela merci
Sorry not sure how to help. 😢 I advice to see a specialist
Hydraulic cylinders or motor? If cylinders it needs to be rebuilt with new gaskets etc. using a company called Top Hydraulics...cheapest option. Most expensive options is to buy a new one from BMW which cost 1k USD per cylinder.
How can i test the motor without conecting it to the car??
Sorry not really sure
with multimeter connect plus and minus terminal and try spinning it manually. if it works you should get an ohm reading that goes up and down while it turns
I just connected it with battery charger to positive and negative terminal for a second. If i hear the motor spins it's working. it might not be the best way to test it without connecting to the car.
Sorry but it was reality boring