Hard steering 2015 Volvo VNL steering drive shaft "U- joint" replacement
Вставка
- Опубліковано 29 вер 2024
- reason for replacing is because of hard steering, especially while in law speed trying to turn left or right. From the video "you" can see the U joint connecting the steering box it got a lot of resistance, while the one close to the steering wheel it was to lose (the robber boot around the U joint was busted)
Great job. I love your video without words just work!
Great!
Great video!
Do you remember the part number ?
Thank you
Sorry , I don t have that..every Mack or volvo dealer should have it . It s about 25 a piece..
Very nice video, perfect.
I’m replacing them now and the u joints only cost me $40. Volvo wants $900 for whole steering shaft cauze they don’t sell them seaparate, of course they are not dumb to make $40 ahen they can make $900. Part number is 482212-B brand is Neapco.
thank you again for this video
Yha .. they know how to make money on truckers.. what s new lol
This music should be official music of all American mechanics. 😂😂😂
Will do .. I'm pretty sure you got special channels for the music
@@eugeniujosanu279 Unique
about to do mine. dont need to watch another video after watching this one. Thank you .
What a nasty music 🤮
...talk to youtube about it. Not gonna pay 30 $ month for your ears. Try to mute the video or mute yourself.
Great
When putting the joint on near the gear box should it be flush with the gearbox or still small a gap like yours?
Yes you can replace the u-joint but you can't replace the wobble middle part of the shaft.
What does it mean when theres is a humming noise when turning steerring wheel
If it s to loud, check your power steering pump, or at least if you have enough fluid, in the reservoir.
Are both sides u joints of the shaft the same?
Yes
Thanks. Today i looked up mine. Its 07 Volvo with ZF gear and its totally different u joint. More square-ish and smaller. Might not be serviceable :/
Need reprogram whe you replaced?
No reprogramming needed . Haven t seen any sensors for the wheel either .
Whats the part number of that u joint?
Dana Spicer SP 5-103X is the part number, of course you’ll need (2) two of them.
Will this part # work for any volvo?
You are a hero thank you for this video !
Glad I can help others 😌
I have a 2017 freightliner cascadia evolution truck feels like it's floating going down the highway and have to slow way down for a curve in the road could this be my issue?
@Jeremy Higdon this is usually for really hard steering .Your problem may be a different one. Compare the steer shuft with same model by grabbing it and see the amount of play. If yours is to hi (to loose)on the side of the gear box you'll see a big not with a pin in the middle of the nut. it have a gap for screw driver . Loose the not , and screw the pin left or right , by checking the shaft for the play. You want the play to feel some resistance, not all loose and crazy.
@@jeremyhigdon9563 I added a video for steering wheel shaking (no hard turn ). Don t forget to check the tires , end rods , and king pins (didn t notice on mine so far )
ua-cam.com/video/9i68iBkX2d0/v-deo.html
My 2008 Volvo D13 is doing the same thing. Hard to steer at low idle speed when turning corners and trying to back into a dock. No power steering leaks and no grinding noises. Can this be the same problem described in this video?