Hello everybody. When I sprayed the forms with grease @6:55 in the video I sprayed the wood only and avoided spraying any rebar using a spray can with a tiny nozzle, this requires accuracy while spraying, with that being said it would probably be easier to just grease the forms before any rebar is present. Also @6:00 in video I talk about the vertical rebar for blocks. Depending on your local building codes a small 6" bend at the bottom of vertical rebar may be needed.
Thank you for putting yourself out there for us. It can be daunting to take on a new task BUT it’s even more daunting to listen to all the criticism you get on how you did it. If it’s any consolation, I have learned a lot from both you and the commentators!
A very thorough series, and luckily for me almost exactly the kind of construction I'm going to be doing! Yaaaay someone already did all the groundwork.
In the moment he's probably like this is stupid and my dad is always making me do this dumb crap but in the future he should understand and be thankful
For a rookie you did a good job. If this is your first time you did a really good job. A couple of tips: make your forms a couple of inches high and hammer nails in at pour height. That way you can finish under the boards without taking them off. Second: Use a vibrator to settle the rock and aggregate during the pour. It also chases the trapped air up and out of the mud while pouring. Third: Use plywood cleats across the top with spreader blocks instead of 2x4's. As far as oiling the forms, you can buy form oil and an open top sprayer and coat the forms before you set them. Don't get any oil on the rebar. Also, after you pour the mud and vibrate it, don't monkey around with the iron. It's set in good. Plum it after the mud sets up a day by bending it. No inspector is going to soil himself if you have to bend a dowel a few degrees. Finally, any mud that spills out over the form onto the back side,,, get that shit out of there before it hardens so stripping the forms is easy. Just spread some plastic sheeting out and dump the over pour on that. As far as rebar placement, we would run a 2x4 on edge on top of the cleats the length of the pour and either tie wire or bend nails over the rebar on our layout. So you can set all the forms and put the rebar in last.
This is the best video on footer forms that I've seen. I can do this to save $$$ before hiring someone to work the concrete. I'm not young enough to do the pouring and finishing because it is so time sensitive.
That's a nice solid structure and the foundation is great. Great work all around! For those looking to save exponential amounts of money and especially time though you could skip all that form building, "greasing the forms" and the super high vertical rebar with the "safety caps". As you are digging it out either by hand or machine, just dig the form of the footer in the dirt itself... You're gonna want to put 2-3 adjacent, long, lines of horizontal rebar down the and length and width of the footer, regardless of whatever city or state code, and bend 90 degrees around the corners. You also need all this rebar on the ground to raise a good 3 .5 inches above the dirt for the concrete to set below it. We can do this by simply splitting regular red bricks in half and placing them beneath the rebar about every 4 feet. You don't have to buy special cuts of steel wire for this, you could even use stones from a nearby creek to make sure you rebar is high enough above ground. All this effort will almost entirely prevent cracking well beyond your great, great, grandchildren's lifespan if done properly. Don't forget the rebar tie wire that connects each individual piece to the next and double up at intersections between individual pieces of long rebar with at least a 20 inch overlap . At 4:50 in this video we're going to instead put a short 16-18 inch piece of rebar crossing our long pieces and tie those in with wire as well. Finally, every 4 feet, you drive an 18-30 inch piece of rebar vertically along the center of your footer and use a laser level to put them at the exact height you want your footer to be all the way around (about 12 inches of concrete for 1 story structures). As you are pouring concrete you have an easy height measurement with that vertical rebar that's been leaser leveled exactly, instead of a health risk you need to buy extra stuff to cap off or a huge, time intensive wooden form made from planks you can barely re-use. As a disclaimer this method requires more skill in digging, especially with machinery and you may use an extra yard of concrete or two, however it saves huge amounts on lumber, grease, plastic, and most importantly... time.
Well done. This is the best video I have seen on pouring a foundation. A lot more detail here than some of the professional videos. This breakdown was close to ChrisFix level, as far as information and order goes.
Great work. Inspiring and easy to follow. Self constructing my 1200 sq ft all steel reinforced concrete extension and among all the videos out there, your work is a good guide to follow. Thanks from the island of Guam.
Awesome vid. About to do some footings myself for the first time and this was great to see the whole process. One thing I noticed is that the whole area looks pretty dry at the end. Usually, you don't want to allow the concrete to dry out until it has finished curing or it can cause surface spawling. I've seen crews cover their work in plastic to slow evaporation if going out and spraying it down often is untenable.
great video! thanks for the thorough explanation. Currently taking a construction cost estimation class in Grad school and this helps with understanding methodology and logic for foundation/footing/walls etc.
I have been watching quite a few videos on concrete footings. Yours was very organized and look forward to sharing with my husband as we are planning to build our first home and we want to be a part of the build. Hence why so many videos to get inspired since there are different techniques. Thank you for posting!
Wow, you did a great job of explaining the process. You made it seem less frightening. Also, you have a great voice for narrating. I will continue to look for more videos from you. Good job.
Thank you for sharing this video. It's so nice to see your whole family involved. I don't know much about construction but I love the art form. To me it is very therapeutic and calming :-). I can watch these videos for hours. Where is part 2?
Nice. Only suggestion is you can rent a virbrator or perhaps use a sawzall without a blade to help the crete flow and remove voids. You can also talk to the crete company about some plasticizers which help the crete flow more liquid-like. I have to do a similar for a large shed, and this was a good reminder from when I did this as a teenager.
That was a nice job. I would build the form boards using the 2x4 in perpendicular position ,that way give more strength to the forms( you can not believe how much concrete can punch to the forms)Congratulation!!
Loose the 90 degree corners on the inside and make radius. Adds a great amount of strength and eliminates the potential for cracking as there is a high pressure point on the inside corners
We wrap tie wire around our forms about every three feet to keep it at 16 inches so that we can trial off the top of our forms one guy with a concrete rake behind the pump to knock it down then after the trial guy we wet set our rebar using a tape to make sure the spacing is correct
A few tips. -If you want the rebar to hold a downward load install it about 2” from the bottom. If it’s an upward load put it about two inches from the top. If you put it in the center it carries little to none of the load. -A concrete vibrator rental isn’t that bad. - If you want the grout to bond to the footing leave it slightly rough and dampen as you apply the grout. - the vertical rebar should have been tied to steel mat and not set on blocks. (I’ve rejected pours for this very reason. Contractor was pissed.🤷♂️) Overall it seems like a good family project. The kids will never forget that.
In your first tip, you're talking about the horizontal rebar in the channel? I'd also like to know the answer to the other person's question :) Also, what exactly does "grout" mean? He's saying to fill the cells of the concrete blocks with grout..is that a different mixture or he just means more concrete?
Very impressive! i am planning on building a block/brick shed in my back yard. Unfortunately for me, because of the frost line, it appears I will need about 10 cubic yards of concrete for the footers/monolithic slab, yikes
Hello everybody. When I sprayed the forms with grease @6:55 in the video I sprayed the wood only and avoided spraying any rebar using a spray can with a tiny nozzle, this requires accuracy while spraying, with that being said it would probably be easier to just grease the forms before any rebar is present. Also @6:00 in video I talk about the vertical rebar for blocks. Depending on your local building codes a small 6" bend at the bottom of vertical rebar may be needed.
Can't hurt to do it even if the code doesn't require it, can it? It's possibly a pain, but probably worth it.
what if i dnt use a vertical rebar, would this make the foundation weaker?
@@nickbrutanna9973 mmmlmĺ5. v.
. b b v b. b. v. v. w
Joathon
@@chinoblood1 Then the backfill pressure would be able to push the wall inward at the base. Another reason you don't want perfectly smooth footers.
Thank you for putting yourself out there for us. It can be daunting to take on a new task BUT it’s even more daunting to listen to all the criticism you get on how you did it. If it’s any consolation, I have learned a lot from both you and the commentators!
Thanks man.
I know nothing about construction but now I feel like I do after watching this 101 tutorial. Thanks
You're an excellent teacher! You explain all that is necessary, succinctly, without distraction. Thank you!
Thank you
except its all wrong very wrong
A very thorough series, and luckily for me almost exactly the kind of construction I'm going to be doing! Yaaaay someone already did all the groundwork.
Glad to see your kid helping out. A wonderful experience working with his hands that he will remember with fondness.
No he won't 🤣
In the moment he's probably like this is stupid and my dad is always making me do this dumb crap but in the future he should understand and be thankful
I did all kinds of things with my dad when I was a kid. Loved every second of it.
Awesome seeing the family work together. Thanks for sharing this.
For a rookie you did a good job. If this is your first time you did a really good job. A couple of tips: make your forms a couple of inches high and hammer nails in at pour height. That way you can finish under the boards without taking them off. Second: Use a vibrator to settle the rock and aggregate during the pour. It also chases the trapped air up and out of the mud while pouring. Third: Use plywood cleats across the top with spreader blocks instead of 2x4's. As far as oiling the forms, you can buy form oil and an open top sprayer and coat the forms before you set them. Don't get any oil on the rebar. Also, after you pour the mud and vibrate it, don't monkey around with the iron. It's set in good. Plum it after the mud sets up a day by bending it. No inspector is going to soil himself if you have to bend a dowel a few degrees. Finally, any mud that spills out over the form onto the back side,,, get that shit out of there before it hardens so stripping the forms is easy. Just spread some plastic sheeting out and dump the over pour on that. As far as rebar placement, we would run a 2x4 on edge on top of the cleats the length of the pour and either tie wire or bend nails over the rebar on our layout. So you can set all the forms and put the rebar in last.
I have to say that the lady in that video worked harder than anybody else on that project. 👍🏻
This is the best video on footer forms that I've seen. I can do this to save $$$ before hiring someone to work the concrete. I'm not young enough to do the pouring and finishing because it is so time sensitive.
I will be looking at building a contemporary home in 3 or 4 years. Thanks for helping me get a start on my journey.
that pump truck operator was a total butt cheese lol !! he had you on the run lol
You are really gifted at producing videos. This was an excellent video for me as I get ready to add on to my home.
Thank you
Nice job . The Family working together ... Priceless !!! 😊
Thank you
That's a nice solid structure and the foundation is great. Great work all around! For those looking to save exponential amounts of money and especially time though you could skip all that form building, "greasing the forms" and the super high vertical rebar with the "safety caps". As you are digging it out either by hand or machine, just dig the form of the footer in the dirt itself... You're gonna want to put 2-3 adjacent, long, lines of horizontal rebar down the and length and width of the footer, regardless of whatever city or state code, and bend 90 degrees around the corners. You also need all this rebar on the ground to raise a good 3 .5 inches above the dirt for the concrete to set below it. We can do this by simply splitting regular red bricks in half and placing them beneath the rebar about every 4 feet. You don't have to buy special cuts of steel wire for this, you could even use stones from a nearby creek to make sure you rebar is high enough above ground. All this effort will almost entirely prevent cracking well beyond your great, great, grandchildren's lifespan if done properly. Don't forget the rebar tie wire that connects each individual piece to the next and double up at intersections between individual pieces of long rebar with at least a 20 inch overlap . At 4:50 in this video we're going to instead put a short 16-18 inch piece of rebar crossing our long pieces and tie those in with wire as well. Finally, every 4 feet, you drive an 18-30 inch piece of rebar vertically along the center of your footer and use a laser level to put them at the exact height you want your footer to be all the way around (about 12 inches of concrete for 1 story structures). As you are pouring concrete you have an easy height measurement with that vertical rebar that's been leaser leveled exactly, instead of a health risk you need to buy extra stuff to cap off or a huge, time intensive wooden form made from planks you can barely re-use. As a disclaimer this method requires more skill in digging, especially with machinery and you may use an extra yard of concrete or two, however it saves huge amounts on lumber, grease, plastic, and most importantly... time.
By far the best video I've watched. Awesome family working together.
I like that you got the family involved and the project looks very good.
Well done. This is the best video I have seen on pouring a foundation. A lot more detail here than some of the professional videos.
This breakdown was close to ChrisFix level, as far as information and order goes.
Thank you
@@D.I.Y._All-in-One no problem
I have to say, this was well planned, engineered and executed. Will check to see the finished block wall and final addition.
Very easy to follow. I'm taking a residential construction course and this put the words that I just read into motion. Thank you for sharing.
Great work. Inspiring and easy to follow. Self constructing my 1200 sq ft all steel reinforced concrete extension and among all the videos out there, your work is a good guide to follow. Thanks from the island of Guam.
Thank you
good to see all the family working on it... great team work
Awesome vid. About to do some footings myself for the first time and this was great to see the whole process. One thing I noticed is that the whole area looks pretty dry at the end. Usually, you don't want to allow the concrete to dry out until it has finished curing or it can cause surface spawling. I've seen crews cover their work in plastic to slow evaporation if going out and spraying it down often is untenable.
I love concrete as a building material. Great Video.
I can't believe more people haven't watched this. The steps and your narrative are great.
Thank you
Awesome you guys worked hard and got something nice to be proud of in the end . 👍
Thank you sooooo much for these awesome videos. I love how you explain EVERYTHING you do.
thank you
great video! thanks for the thorough explanation. Currently taking a construction cost estimation class in Grad school and this helps with understanding methodology and logic for foundation/footing/walls etc.
I have been watching quite a few videos on concrete footings. Yours was very organized and look forward to sharing with my husband as we are planning to build our first home and we want to be a part of the build. Hence why so many videos to get inspired since there are different techniques. Thank you for posting!
Thanks. I got more videos coming about building a block basement soon.
I did commercial concrete in SoCal for a while, You guys all did a great job.
thank you
Wow, you did a great job of explaining the process. You made it seem less frightening. Also, you have a great voice for narrating. I will continue to look for more videos from you. Good job.
Thank you
Thank you for sharing this video. It's so nice to see your whole family involved. I don't know much about construction but I love the art form. To me it is very therapeutic and calming :-). I can watch these videos for hours. Where is part 2?
I love that this project is a family affair.
I'm not jealious working with family is always a pain in the ass
@@johndowe7003 rather get drunk and do it with buddies
@@W333dm4n no shit, same here buddy
Nice. Only suggestion is you can rent a virbrator or perhaps use a sawzall without a blade to help the crete flow and remove voids. You can also talk to the crete company about some plasticizers which help the crete flow more liquid-like. I have to do a similar for a large shed, and this was a good reminder from when I did this as a teenager.
Thanks. The crete vibrator would have been nice. I used on for my concrete steps it worked well.
Well done !! Thank you for making it look so simple - which it is.
Liked how you explained the process.
Excellent tutorial, thanks
Great job! Really well done video. I really liked the way your whole family pitched in!
Thanks
Great family, all hands are on the job!
Thank you
Awesome, whole family worked to get things done
So cool to see what it looks like your whole family helping 🫡
This is my first time watching g this channel. I like how you worked with your family. Looking forward to more videos.
Thank you
This is awesome my guy. Thank you so much for sharing this.
Nice teamwork with family
Nice job and nice video, explained everything really well.
Thank you
Thank you for your very nicely detailed video. Very informative and well made.
Thank you
Great teacher, great audio and video! Well done!
Thank you kindly!
This is really great.
You’ll help a lot of Folk.
Thx
☮️☃️
Thank you
Looks like you have a good hard working lady by your side
I’m definitely going to get that pump truck I’m building my house 120 feet away from the road so that’s gonna be a miracle😂
That was a nice job. I would build the form boards using the 2x4 in perpendicular position ,that way give more strength to the forms( you can not believe how much concrete can punch to the forms)Congratulation!!
Great great video. You should do more about anything and everything. Excellent!
More to come!
Brave man. Thanks a lot for this video. Honestly
I loved this video.. thanks for sharing!
Nice job very professional
$320 for a pump truck!!!!, I'm so jealous, A great deal here in Ohio is $850. great video my friend.
Geez expensive
Enjoying your series
Fun project. I’m jealous.
Loose the 90 degree corners on the inside and make radius. Adds a great amount of strength and eliminates the potential for cracking as there is a high pressure point on the inside corners
Great Video!!
Awesome description and video !
nice , simple straight forward. good job
Thank you
Well done explaining the process!
Super hard and quality foundation, thank
Great work! Thanks for putting this together
Thank you
We wrap tie wire around our forms about every three feet to keep it at 16 inches so that we can trial off the top of our forms one guy with a concrete rake behind the pump to knock it down then after the trial guy we wet set our rebar using a tape to make sure the spacing is correct
Love the crew action
Thanks
Great job for a dyi. Nice work sir.
Thanks
A few tips.
-If you want the rebar to hold a downward load install it about 2” from the bottom. If it’s an upward load put it about two inches from the top. If you put it in the center it carries little to none of the load.
-A concrete vibrator rental isn’t that bad.
- If you want the grout to bond to the footing leave it slightly rough and dampen as you apply the grout.
- the vertical rebar should have been tied to steel mat and not set on blocks. (I’ve rejected pours for this very reason. Contractor was pissed.🤷♂️)
Overall it seems like a good family project. The kids will never forget that.
What do you mean by upward load with the rebar compared to downward load?
In your first tip, you're talking about the horizontal rebar in the channel? I'd also like to know the answer to the other person's question :) Also, what exactly does "grout" mean? He's saying to fill the cells of the concrete blocks with grout..is that a different mixture or he just means more concrete?
This is a really good video, thank you.
Really Great Work My Friend Blessings
$350 pump truck very reasonable.
Between 1,000 and 1,200 everywhere I've ever used!
$320
Expensive..my area $250
That was my thought!
Very informative. Thank you
Beautiful. Thank you!
Great detail, awesome information.
Nice job! Thank you for sharing.
Thank you
Excellent job brother and sister
Very good well explained 👏
Nice work! 🎉
Thank you so much I feel like crying. This would be perfect if someone doesn't want to dig when it comes to plumbing and a place for water supply.
Good video, please inform your assistant that construction sites are dangerous places. She should dress appropriately to avoid getting injured.
It's noteworthy you only mention the woman, but not the children.
She was dressed appropriately.
Very impressive! i am planning on building a block/brick shed in my back yard. Unfortunately for me, because of the frost line, it appears I will need about 10 cubic yards of concrete for the footers/monolithic slab, yikes
So impressive!
Really nice video clearly explains...I wish you're local so I can hire you to work on my house add-on project about same size as this, thank you
Great job!
Excellent work
Need your guidance on a DIY home project
Good to see the kids on the build
Thanks for sharing this
Nice work.
That was fascinating. Thank you.
Excellent production. Thanks for the vid.
Thank you
Awesome Vid! Thanks!
Perfect job bro.
Thank you
Smart about the block under the rebar, that's kind of easy to overlook. I assume it's for rust. I have seen people place them in the ground directly.
GREAT JOB !!!!!!!!!
thanks
Thank you for this video!
👍👍👍Excellent job 👍👍👍
Great job
Wow nice job..
Next time vibrate your concrete,it self levels it and it also adds a lot of strength.Otherwise great job .