Nice project. Here are some tips from my experience. 1. Larger holes for the legs would have been better for strength. They make larger auger or flat bits, or you can enlarge the holes with a gouge if need be. It helps to have an in-cannel gouge for this. 2. Sanding and Anchorseal for tenons that will be buried in the top seem useless to me. 3. Trimming the "feet" at an angle to be flat on the floor is not necessarily a good idea. Leaving them with a corner to dig into the ground helps keep the legs from splaying out further and breaking under heavy load. 4. I find it convenient to saw a step about 4 inches deep about a quarter or a third of the way across the top of the block instead of leaving the top flat. This accommodates longer work pieces, and provides a convenient stop when the direction of the hewing blows makes the work piece tend to slide away.
To point 3, it depends on the surface the block is standing on. Corners dig into dirt, but skate across hard floors. On my sandy soil, it doesn't matter how the feet are "finished", any narrow foot is going to sink in and inevitably become uneven. I have to add pads to keep them from sinking right in with every blow to the top of the block. On point 4, agreed that a flat smooth surface isn't the best option. Everyone finds where they want their stop(s) and maybe a notch in the edge, for setting the neck of the spoon in and getting the bowl right on the top for safer chopping.
Bonjour et merci de cette vidéo instructive. Vous avez de bien beaux outils efficaces et anciens. Bravo pour cette belle application. Vous avez enfin répondu aux questions que je me posais quant à quel angle il fallait pour creuser l’emplacement des pieds. Merci déjà pour cela. Je vois je vous travaillez sur un banc d’âne qui a l’air bien pratique. Est-il démontable ? Avez-vous une vidéo pour expliquer comment puis-je m’en faire un qui soit démontable ? Merci pour le partage et pour votre réponse, Michèle
Do you think bamboo could work for the legs? I don’t have trees close, but, I can get bamboo easily. The thing is that I’m not sure if they are strong enough. Thanks in advance
Great stuff, thank you for the upload. Any suggestions on the log to use? I have an abundance of ash, here, not much else (sycamore, maybe). Thanks again
Does anyone think it makes sense to oil the top? Mine is outside all the time and I sometimes wonder if it makes sense to oil it. I appreciate any advice
How do you determine the optimum height for the top of the block? Is it like blacksmith anvils...about the height of your hand almost extended straight down? Or a bit higher? Considering making one like yours, but also have a couple of thinner rounds that can be used on worktops.
The height of mine is almost right at groin height, that way the chopping action puts your arm perpendicular to to your body when chopping on a spoon blank. I think it’s about like what you say, the height of your hand extended straight down, but not the tips of your finders in that scenario, closer to the palm. Hard to explain😅
I love that spoke auger you had- I've never seen one of those before. They look like they would come in handy. Also, if you set the legs at 22 degrees, wouldn't the angle you cut the bottom of the legs at be the same? Couldn't you just use the bevel to mark that instead of using the pencil taped to a block method?
You could, but the pencil method is a scribed to fit cut and inherently a more accurate match than using measurements. In this particular application, it doesn't matter much at all which you use ;)
I didn’t treat it, it was still fairly green so I don’t think it would have taken oil very well. I keep it inside, but I know several people keep them outside also. To a degree they are disposable, so if it does wear out you can always make another one.
Am I okay using hardwood for a block? It's very difficult in my area to get access to large sections of tree, so I'm having to opt for shop bought kiln-dried hardwood
Hi! The tool you are using who makes the end of the legs cylindric on the hand-drill, wath is it called? And where can i by it?? I have been searching on Internett for some time, but no luck in finding one... Biggen (Norway)
thank you for teaching me the trick of getting the leg to floor angle correct! It's the simple things that make the biggest impression.
Nice project. Here are some tips from my experience.
1. Larger holes for the legs would have been better for strength. They make larger auger or flat bits, or you can enlarge the holes with a gouge if need be. It helps to have an in-cannel gouge for this.
2. Sanding and Anchorseal for tenons that will be buried in the top seem useless to me.
3. Trimming the "feet" at an angle to be flat on the floor is not necessarily a good idea. Leaving them with a corner to dig into the ground helps keep the legs from splaying out further and breaking under heavy load.
4. I find it convenient to saw a step about 4 inches deep about a quarter or a third of the way across the top of the block instead of leaving the top flat. This accommodates longer work pieces, and provides a convenient stop when the direction of the hewing blows makes the work piece tend to slide away.
To point 3, it depends on the surface the block is standing on. Corners dig into dirt, but skate across hard floors. On my sandy soil, it doesn't matter how the feet are "finished", any narrow foot is going to sink in and inevitably become uneven. I have to add pads to keep them from sinking right in with every blow to the top of the block. On point 4, agreed that a flat smooth surface isn't the best option. Everyone finds where they want their stop(s) and maybe a notch in the edge, for setting the neck of the spoon in and getting the bowl right on the top for safer chopping.
Wow, I never knew that silent Bob was into wood carving 🙂
That has to be the most comfortable carving horse!! 👍🏼
Thank you. Great use of hand powered tools.
Really good tutorial. Not seen that pencil on a block trick before; very simple and effective. Thanks a lot.
Thank you very much!
Nice
I’ve been wanting to build one of these for ages. You’ve inspired me to get on and do it!
That’s so great to hear Paul, I’m glad the video was inspiring! Your back will thank you😁
That was awesome
I like the way you work, like the old fashioned way. Congratulations.
Thank you!👍🏻
Nice work and I LOVE the background music. let it shine
Good work! 🙂👍🏾
Bonjour et merci de cette vidéo instructive. Vous avez de bien beaux outils efficaces et anciens. Bravo pour cette belle application. Vous avez enfin répondu aux questions que je me posais quant à quel angle il fallait pour creuser l’emplacement des pieds. Merci déjà pour cela. Je vois je vous travaillez sur un banc d’âne qui a l’air bien pratique. Est-il démontable ? Avez-vous une vidéo pour expliquer comment puis-je m’en faire un qui soit démontable ? Merci pour le partage et pour votre réponse, Michèle
Thank you !!! Clear
Do you think bamboo could work for the legs? I don’t have trees close, but, I can get bamboo easily. The thing is that I’m not sure if they are strong enough.
Thanks in advance
Thanks! Clear and helpful!
Thank you, hopefully it helps!
Very nice. Thanks for showing us. Take care.
Thank you!
Great video! It reminded me of the simple, calming, informative, & most of all it was ENTERTAINING 👍🏼
Thank you!
Dude,,, You’ve got some amazing tools,,,!!!!! Iam slowly rebuilding my woodworking setup. I really like your design,,,!!! Great Video,,, Joshua
Thank you! Years of flea markets, yard sales, and antique stores.
Good work Brett...great photography and clear technical instructions make for very useful turtorial...thanks brother
Thank you!
Superb job...
Nice! Thanks.
Nice flow, really getting excited to make one myself
Awesome that would make for a very cool looking table!
Thank you! I hadn’t thought of that, but it could be used for a rustic end table design.
Les pieds du billot sont-ils de la messe ce que le billot lui-même ? Merci de votre réponse, Michèle
What, if anything , do I need to seal the top if I used it as an outdoor table?
You could just use an oil based product like boiled linseed oil, it should penetrate the end grain and provide good protection.
Nice job,!
Hey what r the first pilot holes helpful for? The bit you drilled with is much bigger anyway so how do they help you keep the angle?
@4:30 I couldn't hear you describe the attachment. What is that cone attachment? I love that thing.
It was a spoke pointer followed by a hollow auger.
thank you kindly sir :)
7.23 brilliant thanks going to make mine
Outstanding video! Thanks for sharing.
Thank you!
Great stuff, thank you for the upload. Any suggestions on the log to use? I have an abundance of ash, here, not much else (sycamore, maybe). Thanks again
Ash would be fine, sycamore also.
How did you decide on the angel or splay of the legs? Nice job!
Thank you! I based it on my camera tripod, I don’t remember how many degrees it was but I think I mentioned it in the video.
What kind of carving axe would you suggest for someone wanting to get into spoon carving?
The Council Tool Camp Carver is a good axe for spoon carving. I have it and would recommend it.
Thanks!
Great video, nice tutorial, only the sound is a bit low on my end.
Thank you! I appreciate the feedback about the sound, I’ll see what I can improve the next one.
Love this, thanks!
Thank you!
Silent bob I had no idea you did woodwork lol nice block though good video
He’s a man of all trades lol
Does anyone think it makes sense to oil the top? Mine is outside all the time and I sometimes wonder if it makes sense to oil it. I appreciate any advice
Great stuff!
StuffUCanMake thank you!
How do you determine the optimum height for the top of the block? Is it like blacksmith anvils...about the height of your hand almost extended straight down? Or a bit higher? Considering making one like yours, but also have a couple of thinner rounds that can be used on worktops.
The height of mine is almost right at groin height, that way the chopping action puts your arm perpendicular to to your body when chopping on a spoon blank. I think it’s about like what you say, the height of your hand extended straight down, but not the tips of your finders in that scenario, closer to the palm. Hard to explain😅
Crow Hollow Woodworks thanks. I got it now. Makes sense.
nice video, well done, thank you
Thank you!
I love that spoke auger you had- I've never seen one of those before. They look like they would come in handy. Also, if you set the legs at 22 degrees, wouldn't the angle you cut the bottom of the legs at be the same? Couldn't you just use the bevel to mark that instead of using the pencil taped to a block method?
Thank you, and yes that would work as well.
You could, but the pencil method is a scribed to fit cut and inherently a more accurate match than using measurements. In this particular application, it doesn't matter much at all which you use ;)
Do you treat the axe block in anyway ....linseed oil or similar? Do you keep your block outside? Do you protect it from the weather in any way ?
I didn’t treat it, it was still fairly green so I don’t think it would have taken oil very well. I keep it inside, but I know several people keep them outside also. To a degree they are disposable, so if it does wear out you can always make another one.
Many thanks for getting back to me. Will it dry and develop deep cracks?
It will likely develop a few radial cracks as it dries, but they shouldn’t make it unusable.
@@Crowhollowwoodworks OK, thanks again.
bonjour je viens de découvrir. je ne parle pas anglais et ne le lie pas, mais en suivant la vidéo tout est claire👏 🙏
Am I okay using hardwood for a block? It's very difficult in my area to get access to large sections of tree, so I'm having to opt for shop bought kiln-dried hardwood
That should be fine.
Great
Alpha Llus Ere Ctus thank you!
Could you tell me what kind of wood you used for the block and the legs? Thanks!
I used sycamore for the block and ironwood for the legs, but you could really use just about any wood you have available.
@@Crowhollowwoodworks Thanks!!
Awesome
Thank you!
Hi!
The tool you are using who makes the end of the legs cylindric on the hand-drill, wath is it called? And where can i by it?? I have been searching on Internett for some time, but no luck in finding one...
Biggen (Norway)
It’s a combination of a spike pointer and a hollow auger.
Cool !
Could you check the captions on this? This is such a cool video, but the captions were all messed up..
Good....fast but with a few watches I think I'll get it.
Thank you
Great! I hope it helps.
Crow Hollow Woodworks - I've done it...made my axe block and I love it 😊
Awesome! I’m glad that the video was able to help! Enjoy it👍🏻👍🏻
Sweet
Thank you!
What neck of the woods you live in
Silent Bob.......😬
😅😅
:)