Air Management System by SMC Corp
Вставка
- Опубліковано 5 лют 2025
- #morethanpneumatics SMC solves 3 challenges in ONE product. CO2 Reduction, Visualization, and Scalability. We fully understand the production requirements of manufacturers around the world and work tirelessly to increase machine efficiency and reeduce compressed air consumption. Using a built-in OPC-UA server we give your factory access to pressure, temperature and flow data in order to support condition based monitoring and predictive maintenance. The 3rd challenge we solve is scalability. SMC's wireless radio frequency communication allows 1 hub, to connect 10 remote units to the OPC-UA server! This is a GAME CHANGER. www.smcusa.com
Awesome for new SMC product..
How profit if the machine always running 24hr.
If the machine is never idle, you would never enter stand by or isolation mode, therfore no savings from this features. Please share what is your operating pressure? Have you evaluated reducing supply by 2psi increments?
What is default ip ? and the system configuration can use ip and browser on web ? currently i connected to eip port but unable to get connected and view web setting as well
Very sorry for delay. Only just now did I see your question. AMS default factory setting is NO IP address. Please find IP setting tool www.smcworld.com/manuals/en-jp/search?query=ex9&cd=1
No worry I already did it and video I had created thanks anyway
ua-cam.com/video/uCc-AIuBL2g/v-deo.htmlsi=upxeDKYIhaNVZxfO
it is possible to link my power supply io devices to monitor their usage ? currently i connected to io port 4 seems cant get connected
AMS is not shipped with IP address. It must be set in field. Please use IP Setting Tool, free download from SMCWORLD.COM
AMS has M12, IO-Link port which can be configured thru web browser as a digital IN or dig OUT. What is the mfg & part # you are trying to connect?
www.smcworld.com/manual/en-jp/?c1=A26
@@davidbetts1758 I had try phoenix contact power supply model
Trio3-PS/1AC/24vdc/20/8C/IOL
Connected to port 4
It show in general io link process data port status PD mapping mismatch , I put vendor id and device id with test byte swap also same
My plc mapping I see smc already allocate offset input for it