Testing Audio Innovate's Mini Innofader PNP

In this video, Chris Brackley shows you how to install the Mini Innofader PNP aftermarket fader, and gives it a test run. Read more about it here: www.djtechtools.com/2014/05/13...

[@StingrayOfficial]

I have the Innofader Pro, the Innofader PNP and have cut on the Mini Innofader via the TRs1. They all feel the same actually, they managed to get the same exact feel as the Rane fader, so if you like the Rane faders you will love the Innofaders.

[@JacksonRaeburn]

Cool. Awesome video like always!

[@Househead1200]

Excellent vid mate, subbed. Would it be as simple as your video to install one in my Xone 23? I'm waiting to take the plunge but need it to go in like yours here. Thanks.

[@Fran-or3lt]

Awww….i love young Mojaxx. ❤

[@VedeshDiGeniusRamkissoon45]

Does the original DDJ SX crossfader curve control still work after replacement??

[@TonyStone3000]

Would you still be able to use the Mixer's cut-in and curve adjustments after this is installed? Thanks

[@MadelnMachines]

Does this have tension control to adjust the fader resistance? I really prefer more tension like the djm800 line faders vs the xone 92 ones.

[@albertevomix8364]

Quick question. Channel A on my DDJ SX is working fine but theres no cut with Channel C (right side) after installing innofader pnp.

[@DopamineOverload]

Since the PNP-P isn't available anymore (so it seems), is the Innofader Mini Plus the right choice for a DDJ-SX (the original) upgrade?

[@djsidies]

Chris do you now if it will work in a DDJ-SZ?

[@jmoak311]

Is there a video anywhere on how to calibrate the mini innofader pro found on Reloop elite. So many people are having fader bleed and Reloops process hasn’t worked.

[@OfficialDeejayStarbwoy]

Pro 2 And Pnp 3 which is better for Sz series ?

[@MooooBoriginal]

whats the stock cut in of the innofader mini plus ? Thanks guys ✌🏻

[@L9X]

Will this work on a APC40? I like using my APC to DJ in FL, but I hate the corssfader on it.

[@keshav2609]

Hello how about the ddj-sx2 does it work? thanks

[@DJOLEY]

which one match to my controller Reloop TM mix8 ?

[@djdispys]

Can u put it into a rane 62

[@soacker25]

does it fit the xdj rx??

[@ronronsescar1]

Hi it can use in also ddj sx2?

[@saladking2370]

Quick question
Can I use that Fader Adjustment knob on my Pioneer DDJ SX?
{I use Serato DJ, if that makes a difference...}

[@MooooBoriginal]

Cesar Moreno yes you can 👌🏼

[@SuperPussyFinger]

Who is this guy named "Chris Brackley," and what has he done with Mojaxx?

[@imperia777]

What is the music at the 3:00 mark?

[@kayobeetz3164]

you did not show how to fix the curve

[@Cyribro]

My questions is - can you install innodaders for the volume faders as well? I know the DJ Tech mixer that's like $180 has innofaders on ALL the liner faders on the mixer. I wanted to do the same for my S4

[@timothy_dwight]

Following

[@DNBon.an808]

Here with the same question

[@JaeJayJ.]

will the DDJ SX Crossfader curve and crossfader assignment still work after installing the innofader?

[@johnparker5879]

Prana the dream .... Bestest tune ever!!!!

[@foxwyatt3525]

dunno if you guys gives a damn but if you're bored like me atm then you can watch pretty much all of the new movies and series on InstaFlixxer. Been streaming with my girlfriend for the last few months :)

[@grahamwill7361]

@Fox Wyatt yup, I have been watching on instaflixxer for since december myself :D

[@AntiWarRob]

Is 6mm lenght?

[@EEZAL]

where do you buy these ? there website doesn't have an online shop ???

[@EEZAL]

correction … it does have a "purchase" clickable link down the bottom next to " support …… hmmmm I'm pimpin my ddj sx too

[@yomommastupid]

have you heard of google???

[@domeskeetz]

isnt the paper a hazard of some sort?

[@bidders77]

domeskeetz what like paper cuts?

[@DomesticatedApez]

fire he means

[@djdeejdjay8669]

You never showed how to adjust the cut in...

[@danielmaguire7130]

Recalibrated my Z2 mini inno. Got a cut in point of like 4mm.. junk..

[@vraciunaitro]

Bruh , its based on the delay between the PC or the Mac and the z2.If you using traktor and have below 3ms controller delay you should be getting tight cuts.To get the lowest delay using DJ software and tech tools you should be rockin the latest i7 cpu , fastest possible ssd and decent ram all while having no internet connected or background stuff running.

[@krasserboii1337]

@@vraciunaitro Thanks for the hint! How do you measure the Delay? Ive alwas had a feeling that the cuts are laggy

[@vraciunaitro]

@@krasserboii1337 Traktor measures it , you just lower the sample rate and select 1ms or 2.If you wanna go super fast set the curve on the mixer to sharp and put something like 96samples 1ms then on the track deck you can zoom in on the track which can help if your scratching.

[@LUCASFILMS99]

Hello

[@Kevai_]

And goodbye. TO ANYONE STANDING IN JOHN CENAS WAY!!! -air horns playing-

[@msubb5197]

DJM0R1
*Does the hand on face motion*

[@Kevai_]

M adsubliminals You mean a facepalm? lol

[@msubb5197]

DJM0R1 no i mean the YOU CANT SEE ME move

[@TheSamSYX]

Reverse the Polarity!!

[@spiner111333]

Solder - (SODDER)

[@MrRask99]

ппц я торчу ,,, а для изоляции мы туда бумажку положим