In some cases when you bind a second receiver it may unbind the first. In that case bind BOTH receivers at the same time. Here is how you bind. 1. Turn off transmitter 2. Plug bind plug into receiver bind port and power up receiver. Red light on receiver will be flashing fast. 3. Hold bind button on transmitter on and power it up while holding button down. 4. Red light on receiver will go from fast flash to slow flash when bound. 5. Unplug bind plug from receiver - leave the power on. Red receiver light will go solid red. 6. Turn everything off and then turn back on - receiver(s) will be bound.
@@davekim7573 I just did it. The key was to pull the binding connectors at the same time on both receivers while all is still on. I have FS-i6 firmware ver. 2.0
Hi Bob, I'm getting ready to build the trailer with a 2nd receiver. With many tries, I was able to get 2 FS-iA6 to my FS-i6 firmware 2.0. The key was to bind both, as you mention, and once the red LEDs blinked slowly, I pulled both binding connectors at the same time. It worked like a charm.
I truly appreciate your videos I had bought a blue tooth light setup for my King Hauler fuel trailer and it would never work correct, the setup was 7 pages long, that with the electric trailer dolly legs left very little room to mount the kit. This video had me trashing the complicated blue tooth setup that never worked right and using the second receiver which was very inexpensive. Thank you for this video and the video showing how to set a non attack 4 radio up for my King Hauler and fuel tanker truck. You are very clear and concise with your explanations of how to set things up, this is really important to me, I spent 3 weeks on a ventilator in 2017 with a serious illness that had me hospitalized from July 14th 2017 until November 22 of 2017. I am still recovering memory function now in October 2021 I lost a lot of knowledge I had before the illness, your videos have helped me a lot. Now I just need to find someone who does as well as you at presenting things where I will be able to relearn setting up and tuning my racing drones and my camera drones. Anyway I just wanted to thank you for your videos, they are really helping me with setting up the trucks and trailers I had bought before 2017 and would not start building because of the cognitive losses after 2017’s illness. Your videos on the Freightliner Evo was outstanding!!
Man i got to do this... Yes i'm waiting for my first kit to arrive... a grand hauler with mfc-01 + radio and the neccesay stuff.. yupp i'm a beginner...
FYI, I just attempted this with a flysky is6/fs-ia6b receiver (on the truck) and a flysky fsa3 3 channel receiver (receiver is a little funky, you have to bind it using the aux power channel, not channel 3 as it suggests) for the trailer lights and it worked perfectly. I think the FSa3's run about 6 or 7 bucks. Makes this option even more cost efficient. Wish I'd have seen this before I purchased the Tamiya trailer light kit haha. Additionally, I used power from the "motorized support leg" kit, spliced in with a JST to power the receiver...thank you for all of the informative videos!
Hi Bob Thanks for the video I have 2 FS-ia6b receivers on a Flysky GT5 transmitter but it will not bind them, it always unbinds the last one and won’t bind at the same time
The "b" receivers will not work as far as I know. Only the "a" 6 channel receivers. You must bind both at the same time. Don't know about the transmitter.
Hi Bob I am making a trailer combination road train and I'm stuck on how to add motorized trailer legs to your vehicle wireless trailer light setup what is needed for this do I need to add ESC to this as well I am totally new to this hobby and absolutely love it but when it comes to electrics i and totally out of my league please can you help, a huge fan of your video's thank you
The 2 receiver setup probably can't handle what you are trying to do. You need to go to a more sophisticated system and more channels. Something like the Beier system and bluetooth trailer module.
Hi Bob, looks great. What sort of battery pack would you recommend for the trailer and do you think you will soon ship outside of the states I’m in Australia. Thanks Bob
Hi Bob, I have a Fly sky i6x with 2 fs-ia6B it would only bind one receiver at a time, I tried to bind them at the same time as you suggested on your comment but still just keeping the last receiver bound to the transmitter. Any suggestions? Thanks
Good evening everyone Question concerning the binding of two receptors. I have a Flysky I6S radio and two FS-IA10B receivers. I followed the bindind procedure at the same time established by Bob You can't do both at the same time with the I6S. Do I have to try with one 10-channel receiver and the other 6-channel? Has anyone successfully completed the procedure with a Flysky I6S radio?
Hi Bob ! I got Flysky FS-I6X tried receivers fs-ia6 after trying with fs-ia10b receivers, But still can’t get them to bind together! Got them to slow flash together, Pull binds at same time but only 1 goes solid other slow flash! Can you help me with this Please? Or does it not work with fs-i6x transmitter? Can I change settings etc on transmitter? Would love to hear from you with a solution! Cheers! Love yr videos!
I ended up getting a couple of those light kits and I didn't like them there are no always-on rear lights and the turn signal housing is 5 mm and the l.e.d. is 3mm and I tried using 1 of the 5 mm lights in the turn signal plug and it would not power it. all I want is turn signals and brake lights since I can make my own always-on headlights and roof lights and use a third channel switch to control them.
Please can you help me. As I come from Australia ive been Battling with trying to makea road train with up to 3 trailers. SO how many can I run all told. Cheers
Hi So could you put the second binded receiver in a second truck so you could have 2 trucks linked together with a pole so it's like heavy haulage where its double headed or a the back of the load
Probably but I can think of a lot of other reason that would not work. For example when you steer the lead truck the second truck would turn just as much. Also the throttles might fight each other.
Thanks for the heads up on the second Rx for lighting,but,and it's an annoying one,how do you get the hazard flashing lights to function at the same time as the trucks? Any help would be great as I'm close to loosing it!!!
@@HobbyconceptsLLC yep that's what I thought! May have to go the hardwire route with the indicators,I can get away with four leads between the unit and trailer. Thanks for the reply,keep on truckin' del.
Hi bob. Sorry to bother you but i recently finished my first tamiya truck. A mercedes 3363, i also have a mfc-03. Oh and a flysky raido. The trouble im having is all my lights work on the control unit on the truck but not on the raido. I can only turn the horn and emergency blinkers on with the raido. Any info would be much appreciated. P.S love the video, it was your video's that convinced me to get into the hobby and i love it thanks 👍
Hi. I am not new the the RC world but am new to the Tamiya semi trucks. Wife and kids got me a Knight Hauler for Christmas. These light controllers you use are nice because you can turn the headlights on and off from the radio. I do not see an actual taillight though. Brakes yes, but I am not seeing those bulbs stay on at maybe 50% for a taillight. Is there anything you could recommend to do for an actual taillight? Thank you.
Hi, great video but having problems, same set up as you but cannot bind two receivers, I’ve tried all ways as you describe. Always unbinds one or other receivers , I’m using a 10 and 6 channel, anything on transmitter I can change ? Ideas please thanks
Hi Bob I really like this light kit for my flat bed trailer l wander if this light kit works with my tamiya Attack 2.4 GHZ Radio System, 4 Channel. Thanks
Question how many receivers can you bind to the flysky FS i6 . I already have this system on one trailer and I'm building another trailer that I will be using for the one truck.
Hi bob would you happen to know if this would work with the ia6b recievers and the fsi6x radio. I tried the 10 channel recievers I have and they will not bind in tandem
hi. i am a novice for this. i am trying to get my first radio system. i noticed that aliexpress or amazon doesn't seem to sell the left throttle moded fs-i6x with fs-iA6 but with fs-iA6B. just by looking at the pictures, i cannot be sure if fs-iA6B is just as good as FS-iA6. please let me know. much appreciated.
Here is a link. Out of stock as I answer your question but should be back in stock in a few days. hobbyconcepts.net/collections/radio-gear/products/turnigy-tgy-i6-2-4ghz-6-ch-radio-modified-for-tamiya-king-hauler-style-truck
In some cases when you bind a second receiver it may unbind the first. In that case bind BOTH receivers at the same time. Here is how you bind.
1. Turn off transmitter
2. Plug bind plug into receiver bind port and power up receiver. Red light on receiver will be flashing fast.
3. Hold bind button on transmitter on and power it up while holding button down.
4. Red light on receiver will go from fast flash to slow flash when bound.
5. Unplug bind plug from receiver - leave the power on. Red receiver light will go solid red.
6. Turn everything off and then turn back on - receiver(s) will be bound.
Hi im using flysky fs-i6x transmitter and 2 flysky FS-iA10B receivers and cant get them to bind, but doing it as the video Help
@@mattholland6831 were you able to bind 2 FS-IA10B to the transmitter by following the above instruction?
@@davekim7573 I just did it. The key was to pull the binding connectors at the same time on both receivers while all is still on. I have FS-i6 firmware ver. 2.0
Hi Bob, I'm getting ready to build the trailer with a 2nd receiver. With many tries, I was able to get 2 FS-iA6 to my FS-i6 firmware 2.0. The key was to bind both, as you mention, and once the red LEDs blinked slowly, I pulled both binding connectors at the same time. It worked like a charm.
@@CarMadMax I'm glad I read this cuz I was pulling my hair out! Couldn't bind one, then the other, and couldn't bind two at once until I did this!
I would never thought it could be done this way! Thanks sharing this Bob! I can also see using this to power the dump bed on the trailer!
Yes! I needed to do it this way to work the gooseneck on my Hemmtt trailer.
I truly appreciate your videos I had bought a blue tooth light setup for my King Hauler fuel trailer and it would never work correct, the setup was 7 pages long, that with the electric trailer dolly legs left very little room to mount the kit. This video had me trashing the complicated blue tooth setup that never worked right and using the second receiver which was very inexpensive. Thank you for this video and the video showing how to set a non attack 4 radio up for my King Hauler and fuel tanker truck. You are very clear and concise with your explanations of how to set things up, this is really important to me, I spent 3 weeks on a ventilator in 2017 with a serious illness that had me hospitalized from July 14th 2017 until November 22 of 2017. I am still recovering memory function now in October 2021 I lost a lot of knowledge I had before the illness, your videos have helped me a lot. Now I just need to find someone who does as well as you at presenting things where I will be able to relearn setting up and tuning my racing drones and my camera drones. Anyway I just wanted to thank you for your videos, they are really helping me with setting up the trucks and trailers I had bought before 2017 and would not start building because of the cognitive losses after 2017’s illness. Your videos on the Freightliner Evo was outstanding!!
Brilliant. Just ordered all the bits I need (apart from the trailer 🤣).
Thanks Bob
Thanks sharing this Bob! Its super easy and cheap! Never thought it could be done this way!
Yes, and another advantage is you can run servos or speed controls on the trailer so for example a dump bed trailer would be easy.
I have fallowed you for a couple years and still love watching your video’s.❤
Me finding this video in search of Full Size wireless trailer lights... And considering this... 🙃
Man i got to do this... Yes i'm waiting for my first kit to arrive... a grand hauler with mfc-01 + radio and the neccesay stuff.. yupp i'm a beginner...
Hi Bob. Thanks for your great video, not a spark myself C&G motor mechanic engineer England. This just blow my mind what you've done. Thank you.
FYI, I just attempted this with a flysky is6/fs-ia6b receiver (on the truck) and a flysky fsa3 3 channel receiver (receiver is a little funky, you have to bind it using the aux power channel, not channel 3 as it suggests) for the trailer lights and it worked perfectly. I think the FSa3's run about 6 or 7 bucks. Makes this option even more cost efficient. Wish I'd have seen this before I purchased the Tamiya trailer light kit haha. Additionally, I used power from the "motorized support leg" kit, spliced in with a JST to power the receiver...thank you for all of the informative videos!
Thanks this is awesome 👍. I was breaking my head all along with how to keep this independent of the body. This is awesome
Great video bob I just did this for the vintage 40ft reefer I built for my k100
This is awesome Bob. I shared it to all of my FB RC groups. 👍🏼👍🏼
Yes very helpful again l have learnt so much keep up the good work
you even can use a simple switch on your trailer to cut the power too the ESC
Hi Bob.. Love your videos and this one especially with the written explanation below worked a treat.. Thankyou.. Keep up the good work..
Thanks bud it works with most if not all remotes all so great for operating the legs and tail ramps
Hello Bobby best video on set up with radio and semi truck the way you do it best way
Yea it can be but some man lot of led light on truck it look like Christmas tree
I can't believe you can run two receivers at the same time
Yep you can with ia6 receievers
Thanks, very helpful. I will use this method and will be visiting your store often.
Hi Bob
Thanks for the video I have 2 FS-ia6b receivers on a Flysky GT5 transmitter but it will not bind them, it always unbinds the last one and won’t bind at the same time
The "b" receivers will not work as far as I know. Only the "a" 6 channel receivers. You must bind both at the same time. Don't know about the transmitter.
its works ！ thanks for the sharing，now i can put this for my coming tanker ！
Thank you very much!
Thank you 😊
thanks for the how to vid on this was haveing prob getting new rx to bind then rember u did this an followed what u did an bam awesome vids by the way
Brilliant 👍👍
I fine the same radio you have it nice radio good price
I beleive that you can only bind 2 receivers that do not have telemetry i.e. the Flysky FS-IA6 6Channel Rx. The IA6B and the 10 ch Rx's have telemetry
That is correct.
Wow 😳😊👌
I'm going to have to see if you have those Battery Packs. I much prefer Rechargeables.
Going to try and bind a six channel for the trailer because I have it laying around with the ten channel that's in my truck 🤔 hopefully it works
Won't work with the 10 channel receiver, only the 6 channel works.
I bib a 10 channel plus 6 channel and it works .
@@cerqua718 how did you do that? Which 10ch and 6ch receiver you used?
Would not work with my fly sky fs-i6x receiver’s!
When I bind 2nd receiver, would unbind the first receiver!
Any recommendations?
Exelent
Hi Bob I am making a trailer combination road train and I'm stuck on how to add motorized trailer legs to your vehicle wireless trailer light setup what is needed for this do I need to add ESC to this as well I am totally new to this hobby and absolutely love it but when it comes to electrics i and totally out of my league please can you help, a huge fan of your video's thank you
The 2 receiver setup probably can't handle what you are trying to do. You need to go to a more sophisticated system and more channels. Something like the Beier system and bluetooth trailer module.
rc truck 1/14 connecting control to two receivers???????
Hi Bob, looks great. What sort of battery pack would you recommend for the trailer and do you think you will soon ship outside of the states I’m in Australia. Thanks Bob
how do you it with the fsx 16 last one
Can I hook up the motorized legs to the wireless system and utilize the battery pack.
Sure could. In fact a great use for it. You could use a 3 way electronic switch or just hook a servo to the Tamiya 3 way switch.
Hello, I can't connect my two transmitters, I have a 6-channel and a 10-channel flysky ?
Only works with ia6 receivers. The 10 channel receivers will not work.
請問FS-i6X也可以對碼兩個接收嗎如何操作
Hi Bob, I have a Fly sky i6x with 2 fs-ia6B it would only bind one receiver at a time, I tried to bind them at the same time as you suggested on your comment but still just keeping the last receiver bound to the transmitter. Any suggestions? Thanks
Good evening everyone
Question concerning the binding of two receptors.
I have a Flysky I6S radio and two FS-IA10B receivers.
I followed the bindind procedure at the same time established by Bob
You can't do both at the same time with the I6S.
Do I have to try with one 10-channel receiver and the other 6-channel?
Has anyone successfully completed the procedure with a Flysky I6S radio?
Hi Bob ! I got Flysky FS-I6X tried receivers fs-ia6 after trying with fs-ia10b receivers,
But still can’t get them to bind together! Got them to slow flash together,
Pull binds at same time but only 1 goes solid other slow flash!
Can you help me with this Please?
Or does it not work with fs-i6x transmitter?
Can I change settings etc on transmitter?
Would love to hear from you with a solution! Cheers!
Love yr videos!
Works with the FS-i6x transmitter but not the receivers you mentioned. Only works with 2 of the iA6 receivers.
@hobbyconcepts will Thas work with the fs-ia6 b reciver?
No, only the ia6
I ended up getting a couple of those light kits and I didn't like them there are no always-on rear lights and the turn signal housing is 5 mm and the l.e.d. is 3mm and I tried using 1 of the 5 mm lights in the turn signal plug and it would not power it. all I want is turn signals and brake lights since I can make my own always-on headlights and roof lights and use a third channel switch to control them.
I have tried this with FS-1A6B receivers and it does not work so what receivers are you using
Only works with iA6 receivers. The B model and 10 channel receivers will not work.
I wanted to make my own grand hauler, but it seems that the kit doesnt have a reciever and radio you got a tip for me to start out
Two things...you say the TX is modified...how and why.
Also there wouldnt be a lot of room in some trailers for this set up although I do like it..
The radio has been modified with a self centering left stick.
Will the same thing work with the radio link transmitter
Please can you help me. As I come from Australia ive been
Battling with trying to makea road train with up to 3 trailers. SO how many can I run all told. Cheers
Hi
So could you put the second binded receiver in a second truck so you could have 2 trucks linked together with a pole so it's like heavy haulage where its double headed or a the back of the load
Probably but I can think of a lot of other reason that would not work. For example when you steer the lead truck the second truck would turn just as much. Also the throttles might fight each other.
Really having trouble binding two together I’ve tried everything does the i6x work ia6b receivers
Only works with 2 ia6 receivers. The b model or 10 channels will not work.
Right got it thank you so much for replying I was pulling my hair out 👍👍👍 keep up the great work thank you
great idea but will the turn signals flash in time with the Truck.. i think not.
You are correct, they are not exactly in sync but really hard to notice when the trailer is hooked to the truck.
Thanks for the heads up on the second Rx for lighting,but,and it's an annoying one,how do you get the hazard flashing lights to function at the same time as the trucks? Any help would be great as I'm close to loosing it!!!
No matter what they will flash at different times. The drawback to this system.
@@HobbyconceptsLLC yep that's what I thought! May have to go the hardwire route with the indicators,I can get away with four leads between the unit and trailer. Thanks for the reply,keep on truckin' del.
Hi bob. Sorry to bother you but i recently finished my first tamiya truck. A mercedes 3363, i also have a mfc-03. Oh and a flysky raido. The trouble im having is all my lights work on the control unit on the truck but not on the raido. I can only turn the horn and emergency blinkers on with the raido. Any info would be much appreciated. P.S love the video, it was your video's that convinced me to get into the hobby and i love it thanks 👍
Contact me at jacobsenra@hotmail.com and I will send you a programming sheet on the radio.
Hi. I am not new the the RC world but am new to the Tamiya semi trucks. Wife and kids got me a Knight Hauler for Christmas. These light controllers you use are nice because you can turn the headlights on and off from the radio. I do not see an actual taillight though. Brakes yes, but I am not seeing those bulbs stay on at maybe 50% for a taillight. Is there anything you could recommend to do for an actual taillight? Thank you.
You could probably add 2 bulbs to one lens to get the effect you want. There are units that do what you are describing but the cost goes up quickly.
Comment programme deux récepteurs md6
what about revers ligh?
Hi, great video but having problems, same set up as you but cannot bind two receivers, I’ve tried all ways as you describe. Always unbinds one or other receivers , I’m using a 10 and 6 channel, anything on transmitter I can change ? Ideas please thanks
The 10 channel receivers will not work - only the 6 channel. You must bind the at the same time.
Comment programme deux récepteurs merci
Do u have to use the same exact receiver for ur radio or can use a different one
Only works with the ia6 receivers
Have you done any setups with the GT Power pro system on the Tamiya trucks and trailers?
I am playing with one right now video soon.
Hi Bob I really like this light kit for my flat bed trailer l wander if this light kit works with my tamiya Attack 2.4 GHZ Radio System, 4 Channel. Thanks
These lights will work with pretty much any radio.
Awesome, this works with transmitter fs-i6x??
It only works if you use 2 of the ia6 6channel receivers. It will not work with the 10 channel receivers.
Ok so you're not using an esc for the light kit. What voltage of battery is safe to run without benefit of an
esc? Thank you.
I usually use 4 AA batteries. Traxxas makes a great battery holder with an on/off switch. You can run then on 4-5 NIMH cells also.
Question how many receivers can you bind to the flysky FS i6 . I already have this system on one trailer and I'm building another trailer that I will be using for the one truck.
I have only ever tried 2.
Hi bob would you happen to know if this would work with the ia6b recievers and the fsi6x radio. I tried the 10 channel recievers I have and they will not bind in tandem
Binding 2 receivers to the FS series radios only works with the i6a receivers.
Happy uhhñhhh
Hello I tried your procedure with 10 way receivers and it does not work, do you have a tip for me?
I have heard it does not work with 10 channel receivers.
I have a 6 channel and 10 channel Flysky receivers. Can I bind both like this? 10 in the truck and 6 in the trailer?
I just bib it I have a FS-IA10 and a TGY-IA6 it work great.
I got 2 FS-iA10B Receiver and i can't get them to Bind I try everything why don't they Bind
Those receivers will not work. Only the iA6 works.
@@HobbyconceptsLLC so the transmitter i got i cant use it as a 10 ch it a FS-i6X 10 CH i want the 3 way switch to change gear
hi. i am a novice for this. i am trying to get my first radio system. i noticed that aliexpress or amazon doesn't seem to sell the left throttle moded fs-i6x with fs-iA6 but with fs-iA6B. just by looking at the pictures, i cannot be sure if fs-iA6B is just as good as FS-iA6. please let me know. much appreciated.
Here is a link. Out of stock as I answer your question but should be back in stock in a few days. hobbyconcepts.net/collections/radio-gear/products/turnigy-tgy-i6-2-4ghz-6-ch-radio-modified-for-tamiya-king-hauler-style-truck
Is there a way to get the warning light blinkers to line up with the mfc01?
No, that is the only downfall tp setting up the lights this way. Generally I figure most folks won't even notice.
@@HobbyconceptsLLC thank you very much.
Hi Bob, I’m using fsi10 radio with can I do this with the fly sky i10 receivers?
Only the FS-ia6 receivers will work.
So don’t waste money the fs r9b won’t do it. I’m trying to get a few more AUX channels for my trailer
hi gary here i want to buy this light kit but how is hazard light and revers lights working with this unit
This video shows all the features: ua-cam.com/video/85woXq-5OGg/v-deo.html
I cant get my two flysky FS-iA10B to bind at same time
I have not tried that receiver but try binding both at the same time. If that does not work you may need the 6 channel receivers.
@@HobbyconceptsLLC I've tried to bind both at same time to no hope and ive tried to bind 2 6 channel receivers and a 10 channel and a 6 channel
Hello I also have the flysky fs-16x and I can't get two fs-1a6b to bind together.
@@dion7470 same as me mate