Gracias 🙂. Soy feliz si a su hijo le gustan mis proyectos. Saludos desde Indonesia. Lo siento si mi español es confuso, estoy usando el traductor de Google 🙏.
@@utehstr gracias por responder, una sugerencia deberías dividir el código en modo AP y modo station. Ya qués muy confuso para los que no somos programadores o estamos de lleno en el tema arduino. El proyecto es genial.
You can follow all the instructions in this video to create this project. I have prepared a complete installation image file along with the arduino code file. Please see the description of this video.🙂
Dear your code has some problem to download please check it . All other things is excellent . Today i subscribed your channel due to your good videos .So keep it up.Thanks a lot. I will try to make it .
I've checked it and the code is downloadable. So exactly what problem are you having while downloading the code? Thank you for subscribing to my channel.🙂.
I'm looking for ways of attaching the ESP32-Cam to the pan-tilt, in a way that I can easily remove the ESP32Cam and re-program it. I like your setup, and seems that you can disconnect/reconnect the ESP32 in a easy way. Can you pls provide a diagram of the secondary board that you created, that ESP32 sits on?
The first board is the ESP32-CAM module board, the second board is the "ESP32-CAM-MB" module board (this board is widely available in online stores), the third board is the prototype PCB board. I soldered the output PIN from the "ESP32-CAM-MB" module board to the prototype PCB board, then connected it to the "PIN Header" which I also installed on the prototype PCB board, making it easy to access the ESP32-CAM PIN. I don't have a picture of the diagram, but from the explanation I have written, maybe you have got the point.
@@utehstr The ESP32-CAM-MB doesn't have any markings for the output pin, so how did you locate the output pin? Also, my understanding is that when you put the ESP32CAM itno the MB house, it puts the CAM into programming mode. How do you toggle the programming mode with the usage mode when the CAM is always in the MB house?
Why when I control the Servo via the web does the camera lose the image and the Servo doesn't work like in the video? Do you know what happen with my robot car ?
Dear sir thank you very much for you video .it is very good but i need your small help please, i am trying your both option in number 3 and 4 the pan option when i use live streaming stuck and again i have to re start the power supply. all other button is working very good . only pan has problem please i need your suggestion to solve this issue . Thank you very much once again.
yo tengo problemas con el codigo me salta este error :c:\Users\User\Documents\Arduino\libraries\ESP32Servo\src\ESP32PWM.cpp: In member function 'void ESP32PWM::attachPin(uint8_t)': c:\Users\User\Documents\Arduino\libraries\ESP32Servo\src\ESP32PWM.cpp:315:10: error: void value not ignored as it ought to be success=ledcAttachPin(pin, getChannel()); ^ exit status 1 Compilation error: exit status 1
Genial estaba buscando algo como esto a mi hijo de 8 años le encanta estos proyectos. Muchas gracias por tu tiempo. Saludos desde Ecuador.
Gracias 🙂. Soy feliz si a su hijo le gustan mis proyectos. Saludos desde Indonesia. Lo siento si mi español es confuso, estoy usando el traductor de Google 🙏.
@@utehstr gracias por responder, una sugerencia deberías dividir el código en modo AP y modo station. Ya qués muy confuso para los que no somos programadores o estamos de lleno en el tema arduino. El proyecto es genial.
I just finished referring to you. Thank you very much.
You're welcome🙂.
I can make only bluetooth and IR control car. But this is like professional level.
I wish I'm smart enough to do something like this.
You can follow all the instructions in this video to create this project. I have prepared a complete installation image file along with the arduino code file. Please see the description of this video.🙂
@@utehstr Thank you
@@jumbo999614 You're welcome.🙂
This video is very useful. Thank you a lot
You're welcome 🙂
Wow! Excellent work! very clear instructions!
👍🙂
Could you please provide me with the corrected code?
Dear your code has some problem to download please check it . All other things is excellent . Today i subscribed your channel due to your good videos .So keep it up.Thanks a lot. I will try to make it .
I've checked it and the code is downloadable. So exactly what problem are you having while downloading the code?
Thank you for subscribing to my channel.🙂.
@@utehstr thanks a lot. For your reply. I will try it again.
@@geniustechnology3358 👍🙂
I have a problem with code too
Httpd_req_t was not declared in this scope
I'm looking for ways of attaching the ESP32-Cam to the pan-tilt, in a way that I can easily remove the ESP32Cam and re-program it. I like your setup, and seems that you can disconnect/reconnect the ESP32 in a easy way. Can you pls provide a diagram of the secondary board that you created, that ESP32 sits on?
The first board is the ESP32-CAM module board, the second board is the "ESP32-CAM-MB" module board (this board is widely available in online stores), the third board is the prototype PCB board. I soldered the output PIN from the "ESP32-CAM-MB" module board to the prototype PCB board, then connected it to the "PIN Header" which I also installed on the prototype PCB board, making it easy to access the ESP32-CAM PIN. I don't have a picture of the diagram, but from the explanation I have written, maybe you have got the point.
@@utehstr The ESP32-CAM-MB doesn't have any markings for the output pin, so how did you locate the output pin? Also, my understanding is that when you put the ESP32CAM itno the MB house, it puts the CAM into programming mode. How do you toggle the programming mode with the usage mode when the CAM is always in the MB house?
@@user-ns3jr3jd6u Write down your email address, I will send you the pictures, maybe by looking at the pictures you will understand it easier.
Very good. Thank you so much
You're welcome 🙂.
Good job
Thanks 🙂
Why when I control the Servo via the web does the camera lose the image and the Servo doesn't work like in the video? Do you know what happen with my robot car ?
Dear sir thank you very much for you video .it is very good but i need your small help please, i am trying your both option in number 3 and 4 the pan option when i use live streaming stuck and again i have to re start the power supply. all other button is working very good . only pan has problem please i need your suggestion to solve this issue . Thank you very much once again.
please make a video in Arduino Line Follower robot 3 ultrasonic sensor, 5 or 8 Line Sensors using Multiplexer and PID Controller
Awesome bro ❤️
Thanks bro 🙂
Can we use esp32 wifi Bluetooth development board with cam rather than ai thinkers module
Baane extralu dengutunnav ga....😂
Que modulo es el que utilizas para el esp 32 cam
hi can i hv help with the code pls
yo tengo problemas con el codigo me salta este error :c:\Users\User\Documents\Arduino\libraries\ESP32Servo\src\ESP32PWM.cpp: In member function 'void ESP32PWM::attachPin(uint8_t)':
c:\Users\User\Documents\Arduino\libraries\ESP32Servo\src\ESP32PWM.cpp:315:10: error: void value not ignored as it ought to be
success=ledcAttachPin(pin, getChannel());
^
exit status 1
Compilation error: exit status 1
👍👏🇧🇷👍👏😍...SHOW
Excuse me sir i want to ask my esp32 getting heated and then not showing wifi anymore do you have a solution thank you before
How do you supply power to esp32 ?
@@utehstr ini koneksinya via internet atau lora gan?
brother masukan fungsi capture video atau image
Sir , which code we used for pan tilt camera robot car
No working code till now
Watch the video in full and you will know the order of the code.
ok
👍🙂