How to Install a Chin Spoiler for a Mustang (2018-2023)
Вставка
- Опубліковано 5 вер 2024
- We are going over the steps to swap out the factory chin (front) spoiler to an aftermarket chin (front) spoiler on a 2021 Mustang GT (w/o Performance Pack). This is an easy process that can be done in your driveway using a service jack and jack stands.
1. After Shot - 0:05
2. Step 1 (Chock Rear Wheels) - 0:14
3. Step 2 (Lift Vehicle) - 0:24
4. Step 3 (Remove Lower Air Deflector Screws) - 1:38
5. Step 4 (Remove Lower Air Deflector Push Pins) - 2:28
6. Step 5 (Remove Fender-Liner Retainers) - 2:53
7. Step 6 (Remove Lower Air Deflector) - 3:26
8. Step 7 (Remove Lower Spoiler Push Pins) - 4:17
9. Step 8 (Remove Lower Spoiler Screws) - 4:43
10. Step 9 (Remove Lower Spoiler) - 5:21
11. Step 10 (Remove U-Nuts) - 5:38
12. Step 11 (Install U-Nuts) - 6:07
13. Step 12 (Install Lower Spoiler) - 6:44
14. Step 13 (Install Temp Spoiler Push Pins) - 7:19
15. Step 14 (Install Lower Spoiler Screws) - 7:38
16. Step 15 (Install New Spoiler Push Pins) - 9:21
17. Step 16 (Install M6 Bolt or New Push Pin) - 9:52
18. Step 17 (Remove Painter's Tape) - 10:40
19. Step 18 (Install Lower Air Deflector) - 11:04
20. Step 19 (Install Lower Air Deflector Push Pins) - 11:14
21. Step 20 (Install Lower Air Deflector Screws) - 11:22
22. Step 21 (Install Fender-Liner Retainers) - 11:45
23. Step 22 (Lower Vehicle) - 12:03
24. Step 23 (Remove Wheel Chocks) - 12:29
25. Show it off! - 12:59
CJ Pony "2015-2023 Mustang Jack and Jack Stand Points":
www.cjponypart...
Products Used:
This video contains affiliate links for which I may receive compensation.
MP Concepts Chin Spoiler - www.americanmu...
M4.2-1.41(#8) U-Nut (GM 11513599 or W704823-S439) - amzn.to/3YG6Aii
Cowl & Fender Liner Clip Push Pins (GM 11589293 or W712196-S300) - amzn.to/47AWWkT
M6 x 16mm Flanged Screws - amzn.to/3sdILSJ
M6 Lock Nuts - amzn.to/3qxpafI
Black Nitrile Gloves - amzn.to/3lps6Vo
Cordless Drill and Impact Driver - amzn.to/44bKDIQ
Extension Bar Set - amzn.to/3OZBnmX
Painter's Tape - amzn.to/3MvGM1b
Semi-Permanent Threadlock - www.harborfrei...
Trim Removal Tool Set - amzn.to/3hRQA8j
Universal Joint Set - amzn.to/458xtxN
Wheel Chocks - amzn.to/45sdXMj or www.harborfrei...
Tools:
1/4" Socket Wrench
7mm Socket
10mm Socket
4mm Allen Key
Flat-Head Screwdriver
Jack & Jack Stands
Nitrile Gloves
Painter's Tape
Safety Glasses
Semi-Permanent Threadlock
Trim Removal Tools
Universal Joint
Wheel Chocks
#MPConcepts
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on UA-cam is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on UA-cam. Use this information at your own risk.
Thanks for this! Just got my dad & husband to install mine using your video and I love it
Nice!!!!!
Gotta respect a guy that backs up his stands. Bravo, sir!
Thank you very much. Can never too safe when under your vehicle.
Excellent explanation and presentation! If only all instruction on UA-cam could be this detailed. 🤔
Thank you very much!!!!
I prefer when the lower splitter comes up and overlaps the higher trim piece by the front wheel. Great walkthrough video!
Right on. Thank you
Just installed mine yesterday using your walk through video! 👍🏻 Ended up ordering the new bigger clips you recommended! Man were they hard to clip on 😂 But feels really sturdy and closes the gap! Love your detailed videos! Keep it up 👍🏻😎
Thank you very much!!!! I'm very glad to hear the video helped. Kudos
Two thumbs up for the extra jacks. I use ramps for the added safety, but same spirit. Sharp looking S550. Thanks again for the quality video.
Thank you!!
Get some spacers one there unless you are already planning on new wheels/rims. The car is looking great! A flush(or even a tiny, tiny poke) look for the stance would add a lot. Makes it look wider and more muscle.
She has a list of items she wants to add. It's going to be awesome
Outstanding and such a detailed video, thank you!
Thank you
excellent upgrade
great job man, keep it up brother!
Thank you very much
Looks real nice! It would look much nicer without that front plate. I know it’s for promotional purposes though.
Thank you. Sadly, in Virginia, the front plate is mandatory.
Looks good, mine didn’t turn out like that, the flap on the right has gone in towards the car paint even touching, my car has the PP2 pack which us standard in Australia which apparently it needed a small modification to install but doesn’t look as good as yours.
Need a 140 mph video of the Chin Spoiler at speed. See how it flaps or sturdy
I know it holds very well at 130 mph. I would expect it to hold with the number of mechanical fasteners involved.
I installed mine yesterday but I have a gap on the sides (not where the plastic clips go) but right in the curve, even though I tied up those screws as hard as I could, I’m not sure what the problem is
It is difficult to say without seeing it.
Nice video. Do you know where to buy the screws or what part number they are if we lose some ?
I believe the screws for the Chin Spoiler are: W716345-S450B and the Low Air Deflector are: W715060-S450B.
How much should a service line this cost? If i have my own spoiler and live in California
I have no clue. Its going to vary greatly between shops. Some can knock it out for a reasonable price, others will charge an arm and leg.
At stock suspension does the splitters scrape often?
Not really. Just need to be more aware when parking up to a curb. Some sit higher than others
Will this work with a performance package?
The Chin Spoiler will not. However, the installation process is similar
What plate bracket is that on the front thanks
ua-cam.com/video/pJSKOcNI21I/v-deo.html
thanks bro!!!@@mcgurrentertainment
This is only for the 2018-2023 S550's and not for the 2015-2017 S550!
Correct
“Very little tools” besides a lift, jackstands, etc 😂
And flashlight