Typically, we're going to send you a config file to load that'll cover the PIDs. We've actually updated this video in the last few days. Have a look at this version. ua-cam.com/video/MY6Vb4Pn-NA/v-deo.html
Hi which is the best way and equipment to prepare a Gasoline car meet an emission norm on Natural Gas fuel, would using a wideband AFR be good , but are there AFR configured for 15.7:1 on NG ? Can matching the fuel trims on Gasoline and Natural gas help by using SCT X4 if the fuel trims can be seen in a graph on both fuels using this SCT X4.. sorry long question :(
Isn’t this redundant? The X4 unit can log all by itself then you just take it and plug it into your computer inside the house. You don’t need to drag a laptop along for the ride do you.
Wait. How are you using the software on the pc when the tuner is plugged into the car odb2 port? Is the device plugged into the pc simultaneously with the micro usb cable?
You didn't show how to connect the x4 to the pc. I can't remeber where I put my cable. I have a drawer full of cables and I don't know which one to use.
I need help, whenever I press “check communication” it doesn’t find the device. I’ve tried unplugging and plugging back in, the device has the latest update. What else can I do?
Shoot your tuner here an email or just an email to sales@vmpperformance.com and they'll respond to you with what PIDs they'd like to see for your application while datalogging.
Could not find all the Pids my tuner requested so they told me to contact SCT. I was then informed by SCT that a reptutable tuner should supply a custom config file I can import. My S/C 5.0 F150 runs great on the custom tune but I'd like to know if it's safe because I get some surging around 3500 rpm. A local dyno shop said they could check it out and might be the best route considering the $ invested.
I've contacted them, they are well know in email tune world. But I never get a reply back. I gave up on them. It's a 91 octane tune as that's all I can get around here and I only use one gas station that sells ethanol free 91.
Steve007362436 Really you can do it yourself. Since your boosted, go with a boost gauge if you care. Main ones for safety wiuld be Knock Sensor and Spark. Then choose Air Fuel ratio. Those are main ones you need.
We do! Head to www.vmpperformance.com/performance-tuning where you can browse our tuning options and select a device. If you have any questions, don't hesitate to email us at sales@vmpperformance.com for assistance.
Set what up? It says the car has to be connected to the device and the computer has to be connected to the device at the same time. How is this possible without a laptop?
Hello, Yes we can help with this here is a link to SCT support page should help answer your questions. sctflash.com/support Thank you Shane VMP Performance
Tell Scott to stop facebooking you while you record this videos lol :D
Great tutorial video, helps alot.
So before data logging we need to know what PIDs to select which I’m assuming the tuner lets you know?
Typically, we're going to send you a config file to load that'll cover the PIDs. We've actually updated this video in the last few days. Have a look at this version. ua-cam.com/video/MY6Vb4Pn-NA/v-deo.html
I’m having trouble data logging. I don’t get the actual option on livelink to log, could it be because I have a preloaded tune from sct?
Hi which is the best way and equipment to prepare a Gasoline car meet an emission norm on Natural Gas fuel, would using a wideband AFR be good , but are there AFR configured for 15.7:1 on NG ? Can matching the fuel trims on Gasoline and Natural gas help by using SCT X4 if the fuel trims can be seen in a graph on both fuels using this SCT X4.. sorry long question :(
So you do WOT with the laptop hooked up?
Isn’t this redundant? The X4 unit can log all by itself then you just take it and plug it into your computer inside the house. You don’t need to drag a laptop along for the ride do you.
Wait. How are you using the software on the pc when the tuner is plugged into the car odb2 port? Is the device plugged into the pc simultaneously with the micro usb cable?
Yes.
How to pull the recorded datalog from your livewire ts+
You didn't show how to connect the x4 to the pc. I can't remeber where I put my cable. I have a drawer full of cables and I don't know which one to use.
"Open live-link on your Windows Computer..." *Has Macbook running Windows* Lol!
and......??
I use the same for my mobile tuning, its tough, good battery life, light and the touchpad is leagues better than most Windows laptops
I have a chromebook running windows...
Window parallels sucks cuz it makes the Mac running slow af
The music .... It's stuck in my head now!
I need help, whenever I press “check communication” it doesn’t find the device. I’ve tried unplugging and plugging back in, the device has the latest update. What else can I do?
i need help with this too bro did u figure it out? plz let me know
Champion 138 i kept updating it until it didn’t say anything about check communication
@@angelmontoya7526 mhh what do u mean kept updating what exactly?
@@angelmontoya7526 plz let me know bro I'm stuck over here
I can't find the list of PID parameters on vmpperformance.com
Shoot your tuner here an email or just an email to sales@vmpperformance.com and they'll respond to you with what PIDs they'd like to see for your application while datalogging.
I need help plz... At 1:28 u mention a list on VMP on what you all want data logged, can u please send me the link
info.vmpperformance.com/guides/sct
Does the live link cost? Or is it just a download or something. And i just pay vmp for the different tunes they have and thats it?
Live link is free
So to get live link u have to pay for that as well? Or is it free and u just pay for the tune. And date log like that?
Live link is free.
is this similar to torque pro?
Once u send it to them,and they send info back to you.how do you put file on your device????
ua-cam.com/video/_6NND38MimQ/v-deo.html Here's our instructional video for loading a file onto the X4
@@VMPPerformanceTV thank you. That's what I want to know,how to get datalog file to my device,once it's been worked on.
Could not find all the Pids my tuner requested so they told me to contact SCT. I was then informed by SCT that a reptutable tuner should supply a custom config file I can import. My S/C 5.0 F150 runs great on the custom tune but I'd like to know if it's safe because I get some surging around 3500 rpm. A local dyno shop said they could check it out and might be the best route considering the $ invested.
We suggest you reach out to your tuner again and see if they can send you the configuration file.
I've contacted them, they are well know in email tune world. But I never get a reply back. I gave up on them. It's a 91 octane tune as that's all I can get around here and I only use one gas station that sells ethanol free 91.
Steve007362436 Really you can do it yourself. Since your boosted, go with a boost gauge if you care. Main ones for safety wiuld be Knock Sensor and Spark. Then choose Air Fuel ratio. Those are main ones you need.
Is the car in park or neutral during slow rev?
Either
Do you guys tune 99-04
We do! Head to www.vmpperformance.com/performance-tuning where you can browse our tuning options and select a device. If you have any questions, don't hesitate to email us at sales@vmpperformance.com for assistance.
so I take it you can only do this with a laptop? I don't have a laptop I have a desktop thou......
Hello, +ecentballer1 no you can also use a pc just set it up before going outside to the car.
Set what up? It says the car has to be connected to the device and the computer has to be connected to the device at the same time. How is this possible without a laptop?
YES - GO TO WALMART and buy a 200$ ACER
Link for pid’s
info.vmpperformance.com/guides/sct
Does the SCT only work with windows?
+brianpowell Yes they only support the windows platform at this time
check communicate not work with me
can u help me plz
Hello,
Yes we can help with this here is a link to SCT support page should help answer your questions.
sctflash.com/support
Thank you
Shane
VMP Performance
thank you its work now
how can i make data-log for getting the noot in engine
i hope you understand me
Hello,
Unfortunately i do not understand the question.
Thank you