Randall Ramos really man this guy has completly fucked up the shark fin antenna installation and special mention for fucked up music as well. Hahahhahaa .. 🤣🤣🤣
For anyone wondering, this is entirely for aesthetic looks. You might have some more interference and a bit of signal drop with for FM radio, the 3M adhesive that comes with these kits is typically strong enough to withstand an automatic carwash and to remove it if it starts to come off, you'll need a heat gun, hope this helps anyone
Now is it a massive drop to where you absolutely can’t use it or is it spotty cause I just use my Bluetooth in my dart and was thinking about buying this.
I would suggest putting a bead of silicon around the base too, as water gets in there, and can rot the metal roof, and the electronic part of the antenna under that fin, and then you will have major issue's with rust in a couple of Years,
Silicon on the metal will cause the rust faster than any other thing, even water. Avoid silicon on ur car. If u see the windshield has a special glue that doesn't contain silicone.
so what if i dont have the piece you screw the bolt into anymore. where does the wire connect to the inside of that? im not replacing EVERYTHING on the antennae when i have the base but not the stupid rubber mess there.look at 1:57. i dont have that part but everything underneath.
I'm having the same problem too. Purchased an antenna from Amazon that says it fits my Grand Prix but when I went to install it found out it had more of a snap in and no screw in. Think I'm missing a base piece/adapter.
ATTENTION HATERS: Obviously he installed this backwards BUT if he would have installed it the other direction, it would look effed up because it would be hanging over his windshield. Therefore, there is a method to his madness. So to speak.
Looks like the glue seal wears out and allows water to seep into the antenna. The antenna has a rubber gasket that can also fail and allow water into the roof. I had water stains on my headliner.
This is what happened to my car last week. I think it got lose and when I drove off the car wash it fell off and now I am trying to see where I get one
@@mrchicken8325 Yeah, well I skipped the part of watching tutorials and actually removed my old one 🤦🏻♂️ I'm on my way tomorrow to buy a replacement to the OEM one 🤷🏻♂️
Description Universal shark fin car antenna features:Easy to install. FM/AM radio with internal connection cable. Concise and modern design.Durable, classic, practical and beautiful.Style: shark fin (aerodynamic design). Package includes:1 aesthetic car shark fin FM/AM antenna. 2 threaded screws and 2 nuts for installing the antenna. 1 3 m sticker for affixing the fin.Technical specifications:Height: 6.5 cm. Depth: 5 cm. External width: 7 cm. Internal width: 6 cm. External length: 17 cm. Internal length: 9.7 cm. Material: high-quality ABS plastic.
I just went to replace mine in a 2019 Suburban Premier well I have a coax or fiber running up to my so after tearing my headliner pretty much all the way out it has a way more aggressive contour that most and broke the cardboard so took everything apart to the back door handles to get in there to f with the thing I bought the replacement that didn’t have the coax so put some sealing strips under it and now it’s 3/16” the roof f GM I am going to Silicone the f out of it then drive it till I can go buy a Toyota!!!!!! American 🇺🇸 made shit can kiss my - a s s. 90,000.00 for a product and it has 5 major problems well not this sucker again!!!!! Shitty times to be alive!!!! So Sad to see the shape of this Country!!!!
Good job?! Lmfao... no. It wasn't at all. No screwdgie, fingertight assembly= shit reception, he connected the cable before peeling the 3m backing which means he had to redo it or go get scissors and cut the shit, then he didn't even attempt to conceal or pack the cable into the housing...... But most of all, the damn thing is on backwards!! Dude has straight up defeated the purpose of design. Just as well wire a fucking brick to the roof.
Note: The Antenna position, Is just the way i wanted it. And The Look I Was Going For. So Don't Waste your time telling me Otherwise. Thanks.
Share Entertainmentz you know what? That antenna cover is for rear antenna, idiot!
Randall Ramos really man this guy has completly fucked up the shark fin antenna installation and special mention for fucked up music as well. Hahahhahaa .. 🤣🤣🤣
Hahah looks shit, on backwards and designed for the rear of the roof! You will have to take it off to sell it!
Looks like Yondu's head :) :) Next time put Spoiler on the front as well. We dont waste your time telling. We love to laugh
That is supposed to go on the rear 🤦♂️😅 Your car, your rules I guess but I'd have left it as it was. Looks stupid imo.
For anyone wondering, this is entirely for aesthetic looks. You might have some more interference and a bit of signal drop with for FM radio, the 3M adhesive that comes with these kits is typically strong enough to withstand an automatic carwash and to remove it if it starts to come off, you'll need a heat gun, hope this helps anyone
Now is it a massive drop to where you absolutely can’t use it or is it spotty cause I just use my Bluetooth in my dart and was thinking about buying this.
@@brancetaylor8189 was wondering the same thing I just use the bluetooth in my Dart as well
Did you mount this facing backwards???
yes :D
mohawk 😂
I thought that too !!
He did. And I was searching in comments for this 😂😂
🤣🤣
0:06 Great video. Didnt realise it was so easy to connect to existing Antenna. Thank you. Subscribed.
THANKS 😊
Honestly, that looks a lot better than the old antenna.
but only if you installed it right
To anyone who is planning on purchasing one of these Shark Fin Antennas, you’d better play this song during installation.
Absolutely mounted it backwards 😂 but hey it’s yours. 👍
Nah, your trippin lol
I would suggest putting a bead of silicon around the base too, as water gets in there, and can rot the metal roof, and the electronic part of the antenna under that fin, and then you will have major issue's with rust in a couple of Years,
Wouldn't that make the 3m aggressive less effective?
That doesn’t make sense as the original aerial let water in too what difference does it make
Silicon on the metal will cause the rust faster than any other thing, even water. Avoid silicon on ur car. If u see the windshield has a special glue that doesn't contain silicone.
@@mrchicken8325 If this is the case, then why do plumbers use it to seal bathrooms?
so what if i dont have the piece you screw the bolt into anymore. where does the wire connect to the inside of that? im not replacing EVERYTHING on the antennae when i have the base but not the stupid rubber mess there.look at 1:57. i dont have that part but everything underneath.
steve b did u ever figure it out I’m haveing the same problem
I'm having the same problem too. Purchased an antenna from Amazon that says it fits my Grand Prix but when I went to install it found out it had more of a snap in and no screw in. Think I'm missing a base piece/adapter.
You forgot to tighten down the screw with a Philip to make a good contact so it doesn’t come loose.
It's bound to shake out of position with vibrations over time...
Why not tighten screw with a screwdriver?
Because you need one of your hands to hold your phone
Panda Nesthesia ok but once it’s glued it’s not coming off to tighten and if being used as a antenna it’s going to get bad reception if any.
That’s it? Wow, ok thanks for the video! Glad I don’t have to remove the other antenna base and mess with headliners.
What kind of Tape are you using to Mount it down on the car ?
It’s provided by the product
Irritating music!!!!
ATTENTION HATERS: Obviously he installed this backwards BUT if he would have installed it the other direction, it would look effed up because it would be hanging over his windshield. Therefore, there is a method to his madness. So to speak.
My 2016 Subaru Legacy comes with a sharkfin antenna cover. It is currently leaking.
what do you mean leaking?
Looks like the glue seal wears out and allows water to seep into the antenna. The antenna has a rubber gasket that can also fail and allow water into the roof. I had water stains on my headliner.
might get your car roof leaking inside it nvm i won't buy fake shit shark fin antenna anymore
Big help man! Thanks
What do you mean? That's the rear windshield, right?
No, he's put it on backwards lol
Do they improve the reception on the radio
Mine didn't, I found the reception was not as strong as with the normal antenna, also much more interference.
Hello there do you know where I can purchase the type stripe please thank you
Available in Amazon and Flipkart
@@Tipstech360 Thank you!
AliExpress 1 dollar or less
nice video , I'm going to Try this , this afternoon .
You’d better play this song during installation.
Wow, can't believe how easy this is
Is it safe at the carwash? Or there might ve a chance it gets pulled away?
+Fab Fabrizio hands on carwash YES safe. But Not suitable for (automated Carwash machine).
Fab Fabrizio
if you really care about your car,dont go machine wash! always by hand!
This is what happened to my car last week. I think it got lose and when I drove off the car wash it fell off and now I am trying to see where I get one
when the music is as irritating as the placement lol
it's not a rear wing 😂
My question is, will automatic car washes pull it off??
I have the same question.Did u buy it/try it?
No it didn't come off in the car wash the 3M adhesive base is very strong. You would need to heat it to remove it.
Mine came loose because of the automatic carwash.
Yes I work at one at it knocked mine off
Insane music choice but I fw it
😂
Mine came loose however I didn't see a wire
did you have a nut with yours as you just screwed it into the hole,mine came with a nut but never used it
Dean Fincham j
The nut is just so the screw won't get lost during shipping.
you didnt tighten the screw
Also, thats back to front, hes fitted a shark fin to a ariel above the windscreen!!!! lmao
@@Headshot1002 lmao didn't notice till you say.
@@Headshot1002 😂
does it come with its own glue to stick on the roof?
Yes!
3m tape always use a hairdryer to make it stick good and proper
You should had use a hair dryer on the sticky part before put on the shark antenna.
Is it me or is it back to front
No if it was the other way it would make the car less streamlined
Thanks bro 👍
Good vid, annoying audio ...
thanks for the tutorial, the antenna work Fine for the radio?
+MrYobax no problem so far!. Thanks for Watching Mate🙏
Dont care .. use cell phone for pod casts, music.. I did it for the LOOK!!
@@amgineco me too hahaha look more modern and aggressive, but the antenna work very well in this 4 years.
Nice
Is there any signal drop for fm
No‼ And thanks for watching and please don't forget to SUBSCRIBE and SHARE. If you haven't Already😊
Works OK but the reception is not as strong as it was before with the whip type antenna.
Genius 👍
😆😆😆😆😆😆😆😆😆
@@christianandrade8172 seriously, I was about to remove the bottom part of the antenna.
@@mrchicken8325 Yeah, well I skipped the part of watching tutorials and actually removed my old one 🤦🏻♂️
I'm on my way tomorrow to buy a replacement to the OEM one 🤷🏻♂️
Thanks 👍 he's my dad and Adams dad
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
What if you don’t have an antenna
Ummm sweetie I think you did it backwards
What size is that screw mine did not come with one
Description
Universal shark fin car antenna features:Easy to install. FM/AM radio with internal connection cable. Concise and modern design.Durable, classic, practical and beautiful.Style: shark fin (aerodynamic design). Package includes:1 aesthetic car shark fin FM/AM antenna. 2 threaded screws and 2 nuts for installing the antenna. 1 3 m sticker for affixing the fin.Technical specifications:Height: 6.5 cm. Depth: 5 cm. External width: 7 cm. Internal width: 6 cm. External length: 17 cm. Internal length: 9.7 cm. Material: high-quality ABS plastic.
The slant is what's not sleeping my tape to level up
Do you have any beautiful antenna for fender
How to match it with your car color?
paint it
Anyone know what this song is called ??
someone abusing an electronic device
He made the song he's my dad and Adams dad
And stop being rude hipnicrit s be positive
Who cares
👍
Isn’t it on back to front
I just went to replace mine in a 2019 Suburban Premier well I have a coax or fiber running up to my so after tearing my headliner pretty much all the way out it has a way more aggressive contour that most and broke the cardboard so took everything apart to the back door handles to get in there to f with the thing I bought the replacement that didn’t have the coax so put some sealing strips under it and now it’s 3/16” the roof f GM I am going to Silicone the f out of it then drive it till I can go buy a Toyota!!!!!! American 🇺🇸 made shit can kiss my - a s s. 90,000.00 for a product and it has 5 major problems well not this sucker again!!!!! Shitty times to be alive!!!! So Sad to see the shape of this Country!!!!
Yeah they said they have to take the headliner out on mine too ! What a mess !
Will this work for 2gen Prius
This antenna is universal, but double before buying it. Thanks for watching.
Thanks!
I don't care about replacing no damn antenna i just come here for the music
Good job bro
is back to front
Good job?! Lmfao... no. It wasn't at all.
No screwdgie, fingertight assembly= shit reception, he connected the cable before peeling the 3m backing which means he had to redo it or go get scissors and cut the shit, then he didn't even attempt to conceal or pack the cable into the housing......
But most of all, the damn thing is on backwards!! Dude has straight up defeated the purpose of design.
Just as well wire a fucking brick to the roof.
Abey, yeh ulta lagaya