I just built a 224 and used a mod4 cam, and although it IS a torque MONSTER, it doesn't chop at all. I would have thought with those squared off lobes it would chop, but NO CHOP EITHER. I think I'm getting a nr .274 or .308
We wanna see a beefy build. Tillotson 212 or 225, .308 cam, 40lb springs, billet rod/flywheel/crankcase, 28mm flatslide carb, 1.1 ratio rockers, oil recycler, chromoly pushrods, ported head, valve work, fuel pump, lower gear change around mid-high 4's, and maybe a stroker crank. That's whats this channel needs: a big boy 11k+rpm build and then take it to the races and film content.
I have the same cam in my bike it has a stock lift but a lot more duration it keeps the valves open a lot longer. If you put 1.3 ratio stamp rockers it would bring the lift up to 291
I get 60mph out of predator 212 hemi block with a gx160 head ported and polished and a vm22 port matched with an 8 degree offset flywheel key stage 1 stock cam and Kohler charging magnet flywheel.
So what kind of frame is this?? The description says mega moto but I swear this ain’t no mega moto frame lol love these videos bro! I’m a week into my mini bike addiction and this shit is real! I’m in NC so there’s no mini bike scene around here at all witch blows , but I be out here solo dolo lol
Aye royal jz gotta HUGE. Question !!!!! I have a predator 224 stock internals with a straight pipe exhaust rn wanna add a mukuni carb will the stock internals be fine when removing the governor and adding a mukuni ?
I just built a 224 and used a mod4 cam, and although it IS a torque MONSTER, it doesn't chop at all. I would have thought with those squared off lobes it would chop, but NO CHOP EITHER. I think I'm getting a nr .274 or .308
We wanna see a beefy build. Tillotson 212 or 225, .308 cam, 40lb springs, billet rod/flywheel/crankcase, 28mm flatslide carb, 1.1 ratio rockers, oil recycler, chromoly pushrods, ported head, valve work, fuel pump, lower gear change around mid-high 4's, and maybe a stroker crank. That's whats this channel needs: a big boy 11k+rpm build and then take it to the races and film content.
That’s a proper build my man 🎉
@@sailingvesselkuma4366 I just wanna see Royal go big
That build gon be expensive asl I wish I had a big hp motor for my mini bike😭
Pretty much what I'm running except I got a 315 cam with 1.3 ratio rockers
@@dabtech7456 i heard 1.3 ratios provide too much lift for cams that are running big lift ala .308, .330, .356, .410 etc.
Where can I get one of these gas tanks
10 teeth clutch and how many teeth in the back sprocket
Bro who made your paddle brakes
Yo what size is the carb filter ? I need me one
K&N Universal Clamp-On Air Filter: High Performance, Premium, Replacement Engine Filter: Flange Diameter: 1.9375 In, Filter Height: 3 In, Flange Lengt www.amazon.com/dp/B00062YO8G/ref=cm_sw_r_cp_apip_JsuExilKi9gnS
Whats the 35 chain la setup 14/54?
Where did you get that gas tank from.
How much did u pay to get ur bars chrome?
hows the boy that crashed in the rocks did he die bruh?
What is the name of your engine
Predator 212 6.5 hp
where u get that shirt tho bruh
Just removed governor from my predator 212 Coleman ct200u what screw do I replace the governor arm with ?
Why you ain’t do higher tooth clutch for more top end
What's the measurements on your gas tank?
Still running the 50tooth in the back?
much respect
if you watch RoyalJZ you know "sheeesshhhhh" "loooking ahhhhhhh"
Hahaha love that shit!
Ya feel me
What sprocket you running in the back bro?
Change your gearing
Sheshhh nice bikes bruhhhh
Thorw a 12t on there you doing 60+ all day
Love it man love it idk why you make the best vids but keep it up
I have the same cam in my bike it has a stock lift but a lot more duration it keeps the valves open a lot longer. If you put 1.3 ratio stamp rockers it would bring the lift up to 291
I get 60mph out of predator 212 hemi block with a gx160 head ported and polished and a vm22 port matched with an 8 degree offset flywheel key stage 1 stock cam and Kohler charging magnet flywheel.
That’s that Frankenstein build 😮💨
A bro u think a Briggs and Stratton raptor is worth it fixing it ,I have one all stock?
The Minibike professor has done it again!!! Keep up the excellent work 🏆👍💯
🔥🔥🔥🔥👑
I run the stamped 1.3 rockers with 22lb springs for the Mod2, it takes you from stock lift to .290/.300 lift. It works much better in my 212.
Did u feel a power gain? And how much top speed did u gain??
I running the same set up nice
Autozone outa business😂😂
hope he got dental insurance that homie went head first smh i think i woulda tried to tuckn roll to the side
Get the f275 cam that mod 2 ain't go do it unless you get some higher ratio rockers. Also port that head
I'm in NY and you just described every auto zone out here
Bro this has to be one of the best mini bike channel Fr ❤
Yessir 😎
Hilliard over max torque any day, those shits burn up quick. Plus Hilliard is tunable with springs and sprockets for same price as max torque
So what kind of frame is this?? The description says mega moto but I swear this ain’t no mega moto frame lol love these videos bro! I’m a week into my mini bike addiction and this shit is real! I’m in NC so there’s no mini bike scene around here at all witch blows , but I be out here solo dolo lol
Gts hobbies mini bike
Sup bro, love the vids. Where can i buy a bike similar to yours? Will a stock going anywhere near 50mph?
Black 66, he put the RV L muffler on his open header and he gave him 3 miles an hour more open header hurt your bike
Leave the filters on bruh
Aye royal jz gotta HUGE. Question !!!!! I have a predator 224 stock internals with a straight pipe exhaust rn wanna add a mukuni carb will the stock internals be fine when removing the governor and adding a mukuni ?
You’ll be good just don’t sit on full throttle for like 3 minutes
What he said ^ as long as you know the limits your good
Vato zone
I tho U a thumb an a comment!!
I think if u take that filter off u may get a bit more top end ? I never run filers on my bikes 😊