Hands down the best programming video I've ever seen for any paintball gun. A buddy of mine wanted me to set up his act 2.0, just bought a used one this is the second video I'm watching try to do this, and now everything is working.
mine isn't saving the mode, but when I go check what everything on its nxl, 10.5 dwell ball in place everything comes back how you said to set it in the video. I turn it off to save. Back on turn eyes off its in semi auto. So again check settings and says its on nxl. 10.5 don't know why its not saving but when I check its there set to those specks?
Typically when boards won't save modes they've gone bad. Contact empire tech support and they'll probably have you send it in for repairs or send you a new board.
There is a tournament lock. At the bottom of the board there are two dip switches. 1 & 2. Both down (off) means lock is off. 1 up (on) and 2 down (off) means lock is on. Hope those helps.
@@indyzombie9220 found my dip switches but it was already flipped, dang if the board is bad that's sucks. I juts bought this new at a local shop. I paid 519 $ for a gun with a bad board?? and is the manual a tiny one sided slip of paper or is there an actual Manuel booklet I didn't get one if so
@@zacharyrobison383 you can find the manual for it online. Just download the PDF to your phone so you always have it. If you just bought from a shop. I would bring it back and have them fix it under warranty.
I have an axe 1.0 but can you still possible help? I hold my trigger down amd turn on the marker and all I ever see is a flashing green light. How do i fix that to be able to enter other settings/modes?
Tournament lock is most likely on. If you open your front grip you'll see two white dip switches on the board one will say 1 the other 2. You'll want to turn dip switch 1 to the off position (down) to be able to access programming mode.
Might be a bit late reply but maybe other people would find this useful. The gun starts at 8 bps, so 1 blink = 8 . 2 blinks = 8.5. Making it 6 blinks 10.5
Sometimes it's not the marker that's breaking the paint. A few things you can check on the AXE is to making sure the regulators are NOT past 200psi, check the detents, make sure the eyes are working.
The Redline board is an upgrade for this marker. Much easier to set and has a screen. Honestly though I've never had an issue with LED boards and counting flashes. How often do you change your modes?
Hands down the best programming video I've ever seen for any paintball gun.
A buddy of mine wanted me to set up his act 2.0, just bought a used one this is the second video I'm watching try to do this, and now everything is working.
Thank you
I'm glad it helped.
Amazing video man, thanks. Definitely the best I found. Crazy others don't do this lol
Very welcome
great vid. very helpful - thanks!
Thanks for the info! Just getting into paintball and I ordered this marker online, wanted to find out how to put it in ramping mode. Really helped!
Awesome! I'm glad I could help. The Axe 2.0 is such a solid marker. Great choice.
Very helpful thank you best video for programming that I could find
Thanks man I had trouble setting this up but your video was on point
Awesome! Glad it helped
Thank u sm just got one starting out as well helped a lot
mine isn't saving the mode, but when I go check what everything on its nxl, 10.5 dwell ball in place everything comes back how you said to set it in the video. I turn it off to save. Back on turn eyes off its in semi auto. So again check settings and says its on nxl. 10.5 don't know why its not saving but when I check its there set to those specks?
Typically when boards won't save modes they've gone bad. Contact empire tech support and they'll probably have you send it in for repairs or send you a new board.
Also does the axe 2.0 have a tournament lock?
I opened it up and I don't have any switches to flip?
There is a tournament lock. At the bottom of the board there are two dip switches. 1 & 2. Both down (off) means lock is off. 1 up (on) and 2 down (off) means lock is on. Hope those helps.
@@indyzombie9220 found my dip switches but it was already flipped, dang if the board is bad that's sucks. I juts bought this new at a local shop. I paid 519 $ for a gun with a bad board?? and is the manual a tiny one sided slip of paper or is there an actual Manuel booklet I didn't get one if so
@@zacharyrobison383 you can find the manual for it online. Just download the PDF to your phone so you always have it. If you just bought from a shop. I would bring it back and have them fix it under warranty.
I have an axe 1.0 but can you still possible help? I hold my trigger down amd turn on the marker and all I ever see is a flashing green light. How do i fix that to be able to enter other settings/modes?
Tournament lock is most likely on. If you open your front grip you'll see two white dip switches on the board one will say 1 the other 2. You'll want to turn dip switch 1 to the off position (down) to be able to access programming mode.
I dont understand the balls per second? If it is .5 second increments, wouldn't 6 blinks mean 3bps? 6 X .5 is 3. Sooo what am i missing?
Might be a bit late reply but maybe other people would find this useful. The gun starts at 8 bps, so 1 blink = 8 . 2 blinks = 8.5. Making it 6 blinks 10.5
I have a problem with my 2 axe2.0 they break paint I can use theme
Sometimes it's not the marker that's breaking the paint. A few things you can check on the AXE is to making sure the regulators are NOT past 200psi, check the detents, make sure the eyes are working.
Do I still fix it the same way if I am shooting over 10.5 bps?
If you're shooting over 10.5 and the rate cap is set to 10.5 sounds like you're getting to much mechanical bounce.
@@indyzombie9220 it’s set up rn to shoot at 18.5 bps but I need it at 10.5 bps so that I can start to play with tournament ppl
What is the last thing you mentioned about the eyes or ice something like that
and how do i turn it or on off
Can you please tell me where you got the manuel? I just received my gun in the mail and I can't figure it out..
Nevermind. Figured it out haha
Thanks!! Can you do a video on the set up.for the air tank? How to compress and decompress the gun with a tank?
The lever on the bottom of the ASA
This is why you just get redline board and be done with it.
Man that seems complicated as hell. Why don't that put a small screen and a toggle for easy programming
The Redline board is an upgrade for this marker. Much easier to set and has a screen. Honestly though I've never had an issue with LED boards and counting flashes. How often do you change your modes?
can't get into programming mode it just does the color flashes and then nothing
so after the settings would you switch the tournament lock button back?
No not unless a tournament required it too.
My axe 2.0 won’t change rate of fire, any ideas why?
Is tournament lock on?
idk how ur doing it im doing exactly what ur doing and i cant do it
Is your tournament lock off?
JESUS IS GOD (John 14:6 // John 1:1)
King of random award goes to you.