I hope this works for my issue. All I know is I opened the slider for the first time in two weeks and this issue poped up right after. Couldn't lock the doors, instrument panel said sliding door opem when I slammed it shut several times. So happy for UA-camrs like you who save us time and money spent needlessly at the dealership. Thank you. I will report back.
I took your advice. What a life saver! I had been losing sleep over this. I subscribed to your channel. Unfortunately, it only worked for a little while. I pulled it back out and noticed the new one has a burn mark now too. I see in the comments a few folks had a similar problem. One person said he resealed them fuse. I’m try to figure out what that means. Another person said he used a bigger fuse. After researching a bit I think using a bigger fuse is a bad idea. I hope this comment helps someone else.
Thanks so much for posting this video! I switched the 2 15 fuses and was discouraged when it didn't immediately start working like yours. But I drove it for a little and it worked! Thanks again
Thank you. Just brought my new used 2015 PM yesterday. Could not get doors to lock. Searched for YT help and found your video. Pulled 15A fuse, checked okay, reseated and lock is now working. So reseat did the trick. Would still be looking without your help. Again, 🙏🙏🙏
thank you so much, best advice and very specific, i would have never guest that would be the problem. I was being charged $220 just to tell me what it possibly can be. Problem solved. again THANK YOU
Thank you! I just bought a certified used promaster and the dealership didn't catch this! It wouldn't lock as soon as I brought it home! Edit: I just removed the fuse and re-seated it. It worked! Thank you!!!!
the fuse box door doesn't say what each fuse is for and the owners manual is on dvd. not very helpful if you get stranded and don't have a dvd player on hand!! i searched for some info and your video came up. thank you so much!!!
I’m having problems with my doors not locking. The dashboard light says sliding door is open and it is showing me a door open symbol on the dash. Do you think replacing the fuse number 15 will fix that
Paul, I have a kind of similar issue with my Fob Blinking Lights when locking, They stopped blinking, they just stay on until I push button a second time. PLEASE HELp!!! Thanks Neil D.
I have not seen this before, try replacing the battery in your fob. Also keep the battery out of the fob for 10 minutes so it can revert to original programming. I’m not sure about the fiat wiring or programming
@@Pauls-workshop I took your advice. What a life saver! I had been losing sleep over this. I subscribed to your channel. Unfortunately, it only worked for a little while. I pulled it back out and noticed the new one has a burn mark now too. I see in the comments a few folks had a similar problem. One person said he resealed them fuse. I’m try to figure out what that means.
2019 Ram promaster I bought today... Side and rear doors will lock but will not unlock via fob. Have 4 fobs and it's the same with each. Driver and passenger doors are normal. Probably not a fuse... But posting because it's related and maybe someone will have a solution.
I hope this works for my issue. All I know is I opened the slider for the first time in two weeks and this issue poped up right after. Couldn't lock the doors, instrument panel said sliding door opem when I slammed it shut several times. So happy for UA-camrs like you who save us time and money spent needlessly at the dealership. Thank you. I will report back.
Thank you for posting ! You saved me $120 diagnostic from dealership and what ever else they would have charged me!!!! Blessings to you ! 🙏 👍😊
You made my day, I was very worried about how I was going to solve the problem. I really appreciate it. 🙏
Thank you man, this helps SOOOOO MUCH!!!
Update: fixed it in record time cuz of your work! Thank you!!!🤣🤩🙏🏼
I took your advice. What a life saver! I had been losing sleep over this. I subscribed to your channel. Unfortunately, it only worked for a little while. I pulled it back out and noticed the new one has a burn mark now too. I see in the comments a few folks had a similar problem. One person said he resealed them fuse. I’m try to figure out what that means. Another person said he used a bigger fuse. After researching a bit I think using a bigger fuse is a bad idea. I hope this comment helps someone else.
Thanks so much for posting this video! I switched the 2 15 fuses and was discouraged when it didn't immediately start working like yours. But I drove it for a little and it worked! Thanks again
Thank you. Just brought my new used 2015 PM yesterday. Could not get doors to lock. Searched for YT help and found your video. Pulled 15A fuse, checked okay, reseated and lock is now working. So reseat did the trick. Would still be looking without your help.
Again, 🙏🙏🙏
Omg thank you so much. I bought a new pro master and was pain on my neck figure out about how to lock the doors.💯💯💯💯💯💯❤️❤️👍🏽👍🏽👍🏽👍🏽
Thank you so much! Just locked my doors for the first time in months! Haha
Thank you so much, Paul! I was looking everywhere for a fix for this and I finally found this. You helped out a lot, I really appreciate it!
After this all I wanna just say is I love you
OMG, this was a life saver. No one else had this answer but you that I could find. Thanks.
thank you so much, best advice and very specific, i would have never guest that would be the problem. I was being charged $220 just to tell me what it possibly can be. Problem solved. again THANK YOU
Thanks for the video bro.
You just saved me some money.
I have the same problem with my promaster.
Thank you bro. I spent so much money & time on sensors, relay and other stuff but in tge end it was this same fuse. Thumbs up for u.
Thanks for this! Just fixed the same problem on mine from watching this video 👍👍
Thank you! I just bought a certified used promaster and the dealership didn't catch this! It wouldn't lock as soon as I brought it home!
Edit: I just removed the fuse and re-seated it. It worked! Thank you!!!!
I had the same issue. How did you reseal?
@@hillyhover7021 re-seat as in they removed it and put it back in again
Thank you for posting, I haven’t been able to lock doors for over a year!
Thank You for posting this. Saved me a trip to the dealer. 👍😎
Way cool! Thanks for posting this video! I have been scratching my head on this one for awhile now.
Thanks for the video. Got me up and running (locking) again in no time!
BINGO!!! THANK YOU BROTHER 👍 For anybody reading this if you dont have a spare fuse you can use the other 15 but you wont have ony have any heat/air
Worked for me! 10 minute fix ! Thank YOU
I’ll try tomorrow but I have the same problem and my door switch work only sometimes. Thanks for the video
You can continuity test fuses with a multimeter without pulling them out 💪🏻
Thanks for the help. You saved me time and money.
Great information! Wish i had found this video 3 hours earlier.
the fuse box door doesn't say what each fuse is for and the owners manual is on dvd. not very helpful if you get stranded and don't have a dvd player on hand!! i searched for some info and your video came up. thank you so much!!!
Fobs just stopped working all of a sudden. I’m going to try this! Where do you recommend buying the right fuse?
Great video. It helped me fix my van
Thank you so much for this. Saved me a ton of money!
Thank for the video I'm going to try I have the same problem and can't figure out what the doors didn't lock
Thank you! Saved me a ton of time!
Thank you so much for showing this
Thank you. It was so useful for us today!
Thank you for the help
What do I do if fob locks front doors but not side and back? Checked this fuse.
Hi, so what cause the fuse to pop in the first place? And to check fuses a good test light is best than a flashlight.
Thank you for finding that, hope that's my problem...
Thanks I'm going to try that tomorrow, but my my car doesn't turn on either,u think that's the problem too,The Fuse? I hope it is
I'll try it when I wake up lol thanks
Subscribed bro!!! Thanks!!
I’m having problems with my doors not locking. The dashboard light says sliding door is open and it is showing me a door open symbol on the dash. Do you think replacing the fuse number 15 will fix that
I liked and subscribed !!
If I pull that fuse out, will the autolock disable?
I’m missing a fuse two to the left of the one you replaced. Any idea what it’s for?
Dude, thank you!!!
THANK YOU !
Thank you so much😊
exact same issue. thanks!
Thank you!!
Thank you! 🇺🇲 🦅
Awesome Brother!
Thank you thank you thank you.
You are a HERO I IH I COULD LIKE MOTRE THAN once
Thank you work’s for me
Thank you for video.
Paul, I have a kind of similar issue with my Fob Blinking Lights when locking, They stopped blinking, they just stay on until I push button a second time. PLEASE HELp!!! Thanks Neil D.
I have not seen this before, try replacing the battery in your fob. Also keep the battery out of the fob for 10 minutes so it can revert to original programming. I’m not sure about the fiat wiring or programming
Thank you for sharing
Thank you so much
Ram ProMaster cargo Van all hazard lights steadily activated which fuse is this?
Thanks
How can I get off the sound of the alarm when I unlocked and when I looked any i deas
About to save me hahaha. Thanks
do the doors not lock until all doors are latched? my rear cargo door bottom latch wont latch
All doors need to be closed or none of the locks will work
Thx helped out alot
Thanks, more people do vids it would be helpful...
Thanks .. for you info
I assume this fuse is hot? Is there any need to disconnect the battery first or can you just pull the fuse right out?
You can pull fuses hot.
wow... thanks man
I need to find out where is the passenger side window fuse
For camera not available?
anyone know who horn stopped blowing locking the doors?
I replaced the fuse. It worked one time, then didn’t work again.
Same
Put a bigger fuse!
My ram is doing the same thing. 2019 ram 1500 truck
What about the passenger side slider door? Mine wont lock
Matteo Bateman my back door doesn’t lock or unlock with the remote
Mine just stopped working, I will investigate when I get a chance and post a video when I find the problem,
mine too!
@@dazaboy68 I dont know what I did but everything started working again!
@@Pauls-workshop I took your advice. What a life saver! I had been losing sleep over this. I subscribed to your channel. Unfortunately, it only worked for a little while. I pulled it back out and noticed the new one has a burn mark now too. I see in the comments a few folks had a similar problem. One person said he resealed them fuse. I’m try to figure out what that means.
2019 Ram promaster I bought today... Side and rear doors will lock but will not unlock via fob. Have 4 fobs and it's the same with each. Driver and passenger doors are normal. Probably not a fuse... But posting because it's related and maybe someone will have a solution.
I already change it but still won’t lock
Ça n’ pas fonctionné pour moi malheureusement. Toutes les fuses sont bonnes.
We have these vans in the uk Citroen relay fiat Ducato mines doing the same cheers for this mate saved my arse at the mechanics haha
Now mine unlocks but wont lock. Grr
I have Same proble but with RAM 1500 somebody help to me
didnt work for me
Thank you!
Thank you!