I really like the fact that you show the full extend of work it takes to remove the waste by hand. Often the video magic lets it seem so easy, but reclamping the work piece a hundred times for every single chip is the reality. It often drives me nuts how long it actually takes to make simple joints by hand compared to youtube. So thanks for capturing the whole effort.
Check out Paul Sellers' channel. His videos are continuous, so you can see how long it takes in real time. The exception is if he's doing several different items, then he'll show one all the way through, and have a montage for the rest of them. He also demonstrates several different ways to do things, in case you don't have a particular tool.
“Ooh I think I could just cut like that” 😊 Active thought process in action! I love your videos because you never stop analyzing, thinking it out. So many woodworking videos are dudes confidently cruising on auto pilot and if you’d ask them why they did it, they’d say, again with no break in stride to think it out: “in my X years of experience, I found it works the best” 😂😂😂 I can’t keep up with your videos and I’m clearly behind (this ones from 3 yrs ago!) but I will watch them all! 👍🏻👍🏻👍🏻
You’re one of my favorite UA-cam wood workers to learn from. I love your inquisitive nature. You went through all three of these differently. I feel like I learn watching you discover how to do it.
Tamar, I stumbled across your videos when I was looking at different crosscut sled designs. I enjoyed how you came across in your video and conveyed your idea. I also enjoyed your energy and how you were so willing to show your little foibles & struggles. All too often people (myself included) will allow the fear of making a mistake keep them from trying something new or challenging themselves. So showing your humanity as an instructor really sealed my respect for you. Another thing I greatly respect about you is the cleverness & ingenuity that you display so well in this video and others! Your problem-solving skills are impressive as is your humility & integrity for giving credit to those whose ideas you incorporate in your designs. I look forward to further content from you and am sure that in a short time you will be known as one of the premier woodworking content creators out there. Keep it up! Warm regards, Glenn
I love how you showed there was more than one way to get the same results. A lot of people say it can be done differently but don’t actually show it. I may have to try this when I’m no long an “essential employee”
@@rodjackson6587 Hi, Nice to hear you had Belgium ancestors, and Yes, this was the Flemish way to bring up your children. I was born in 1951 and brought up the same way. Our teaching is still of a high level. Above all I like to see her working, women with tools I love to see them, I think they are sexy. Today was announced in the newspaper that the curve of people who died of Corona is getting stabel. Everybody follows the rules and the Police takes care of the offenders. Greetings from Belgium and keep it safe. Willy from Belgium (Gent). 😷😷😷
@@rodjackson6587 Thanks Rod. I looked the name up, could not find anything.Was he Jude? His name sounds like it. Did he live in Antwerp, because there is still a large Jewish community there. Also nice we both have the sam year of birth. I was born on 15.04.1951. community there. Also nice we both have the sam year of birth. I was born on 15.04.1951. Keep it safe Willy, still from Belgium. 😷😷😷
@@rodjackson6587 It was the name that gave me the idea, but 'What's in a name?'. Indeed, Haarlem is Nederland (Holland). He must have been a tough guy, the endurance of the people, especially the soldiers in the first World War was phenomenal. It will stay a question where he was born, this is not important. What is important, that you have Flemish blood, the only population that stopped Julius Caesar "Alea iacta est" Keep it safe. Willy from Belgium 😷😷😷
The first image of the joint looked like a corner joint (3D) to me at first, rather than a flat three-prong thing. That got me wondering how to make that same look in a corner joint. Using balsa wood, I figured it out, but not sure how strong it would be (But it looks cool). I would love to see you experiment with that look as a corner joint and see if it can be made strong enough for practical use. I can send pics if you want of my balsa wood test.
I'm really impressed how you try different techniques and finding improvements and commenting on them as you go. A master woodworker just gave me a lesson for free.
Thanks for using the squares to setup the initial layout! Enjoyed learning how to use a template with a router too. I would have assumed chisels and saws to do the work.
The best part is the challenge of figuring out multiple ways to cut this. And then adapting to your own shop. Well, also implementing it in a real project at some point! Thanks for the excellent video
I love how you unpretentiously explain every little bit like I’ve never seen anything before but am totally capable of learning it if you just give enough detail, because honestly that’s all true and I’ve learned more from just a few of your videos that most any others I’ve watched. Keep it up.
I love your channel, I always feel like I getting a lesson in master woodworking. Thank you for sharing. I also love the DFM Square System you are using. They make awesome tools.
You, my Lady, are dabbling in the ancient art of Tsugite, or Japanese joinery. The geometric combinations are interesting to say the least. Fine job you did on the three way diamond joint in your video I found.
Every video I watch of yours I spot a new tool, jig or technique that always makes me go "of course!" Super appreciate how well you illustrate and communicate your build process - so much to learn and be inspired by. Also, your kid's doodles on the work bench are great :)
I love that you just cranked out a jig so simple and quickly. I always overcomplicate things and it makes me waste a lot of time but I'm sure that will get better with skills and practice. Thank you so much for the information!! This is definitely going into my diy folder to try out later.
The moment of connection amazed me, brilliant!!! I think, it will be a amazing beautiful joint for the corners of a Geodome, with a little bit change of the angles.
Initially I thought it was like a 3 way miter joint like I've seen in table legs. Almost has a three dimensional look in the picture. But I wonder how this would be used in actual practice. Very nice. Can't wait until the next video.
I'm so glad I found your channel. I freaking love your approach to problems. I've been doing wood working for years as a hobby and still learning. Every video of yours I pick up a little nugget or information or a handy tip. Been binge watching. Thanks for the content
I was looking for a 120 deg three way joint for a shop stool design and to my surprize you came up in the search. It not only is a solid joint for the three leg braces but the joint makes the stool look unusual which is always good. Thanks for the videos, I admire your enthusiasm and sense of woodworking adventure. 8^)
3x3Custom - Tamar Thank you Tamar. I really enjoy your channel. You provide me lots of advice and inspiration. My new toy for this weekend is a wood burning pen kit.
That is a great joint for many cool stand type applications. Could use it as a three section lazy Susan cutting a nice round trim to match the dividers doing a tenon or half lap to join all the pieces together cutting a channel into the sides of the wood adding a 1/8-1/4” bottom. You could even create an inlay effect with a darker wood to add some flair. So many options!
I really like the way you discover different ways to attach this challenge. You've got an inventive eye and a sharp mind. That jig alone blew me away. Then seeing you could make the single cut... then using different woods... then ... Nicely done, kid.
Please allow me to express my admiration for your skill and intelligent approach. You are VERY good and watching you work is most enjoyable and intellectually stimulating. Thank you and keep at it. Congratulations !
Hi Tamar!! I totally enjoy your videos. You’re finger joint video really help me out... I’m a total novice when it comes to woodworking so I’ve been watching all your videos since I subscribe to your channel last week...Your so talented and I love how you tackle a challenge.. I’ve learned a lot in a short time, and I give you all the credit... keep up the amazing work.. You give me that ‘‘ I can do it Attitude’’ THANKS!!
Amazing!! I watched you cut out the first piece, and thought, “I think a router with a jig would be a better method. Then, guess what? There you go!!!!
Just want to say, I discovered your video's by random & I find them very enjoyable to watch. I love to work with wood & some of the things you do, never occurred to me to try. And as an Englishmen in the UK, we like to have a go at just about anything. So keep up the amazing work :)
You're very talented . I used to do woodworking down my basement just for fun . my ex-wife sold everything . Watching you gives me the incentive to start again ... Just for fun.
While u were cutting by hand I was designing a template for routing with a pattern bit in my mind. So cool that u proceeded to do exactly what I imagined!
Thank you! I've missed your content over the last weeks, and was sincerely hoping it wasn't because you're battling infection. I trust you and your family stay well. Your work always inspires me to be a better woodworker and try new and innovative things...
Thank goodness we’re all still ok. But we live just outside it NYC. So it’s a bit scary. I’ve been quiet because I have been trying to figure out how to schedule in my woodworking while homeschooling my kids.... well get through this. Ha
It is always such a pleasure to watch you discover and do. I also loved how you brought the router into play. I just got my first router!!! 🤓 Thank you for all your hard work in making such great videos.
You never cease to amaze me. Your joint's looks awesome. And like your merch line as well...have a safe weekend,and yes i want that center finder...lol
Nice job Tamar, I guess we will soon see this joint in one of your projects! I remember you saying on a video some time ago "I need to practice and improve my skills with chisels", seems like you definitively got it now! Stay safe your familly and you! Greets from France
That awesome incra miter gauge has a built in super precise micro adjustment in it, check the stop block, from the position you use the gauge, the stop block has a horizontal screw on your left, that is the micro adjustment screw, tighten it to cut more, loosen it to cut less, you will need to also loosen the two screws on the top of the stop block to allow this movement. It is awesome!
Typical (from you) excellent video. Great to see your work holding and approach in general. Never have seen the small carpenter's square with a moveable pin. Seems useful. I want my daughter to watch your videos so she knows no gender barrier to being a woodworker! Glad you are well and happy.
I'm not sure if anyone mentioned this or not, but this joint works with almost any number of boards. So long as you follow some basic math, take the number of boards desired and divide 360 by that number. That will be the angle of the first cuts you need to make. So if you wanted 6 boards for a really decorative piece you would need 60 degree angles instead of the 120 that were used. This ends up being a rather beautiful piece if done correctly, also odd numbers will almost always look better than even because one of the boards will always be centered. By adjusting the Maximum angle you can also do some really unique designs, such as a starburst pattern by just dividing by 180 instead of 360. The rest of the process remains the same regardless.
Oh, and have you ever thought about using a bench hook to secure your work piece for that kind of work? I don't cut joints like that, but I find them super useful for cutting dovetails, which are similar. Anyway, nice work as always.
I wonder if an oscillating tool would be useful to hog out material if one were going the non-jig and router route. However, the flush trim bits are amazingly useful. I have a freud one that is 2.5in tall with bottom bearing.
Crazy joint! The router rules but as always, your hand chisel skills are always impressive and fun to watch We are quarantined as well and catching up on projects. Stay safe and healthy to all
From the thumbnail, I thought this was going to be something completely different. Not at all disappointed! I watched it a second time and it made a lot more sense! Time for new glasses I see! 🤓
I really like the fact that you show the full extend of work it takes to remove the waste by hand. Often the video magic lets it seem so easy, but reclamping the work piece a hundred times for every single chip is the reality.
It often drives me nuts how long it actually takes to make simple joints by hand compared to youtube. So thanks for capturing the whole effort.
Glad you like it!
Check out Paul Sellers' channel. His videos are continuous, so you can see how long it takes in real time. The exception is if he's doing several different items, then he'll show one all the way through, and have a montage for the rest of them. He also demonstrates several different ways to do things, in case you don't have a particular tool.
“Ooh I think I could just cut like that” 😊 Active thought process in action! I love your videos because you never stop analyzing, thinking it out. So many woodworking videos are dudes confidently cruising on auto pilot and if you’d ask them why they did it, they’d say, again with no break in stride to think it out: “in my X years of experience, I found it works the best” 😂😂😂 I can’t keep up with your videos and I’m clearly behind (this ones from 3 yrs ago!) but I will watch them all! 👍🏻👍🏻👍🏻
You’re one of my favorite UA-cam wood workers to learn from. I love your inquisitive nature. You went through all three of these differently. I feel like I learn watching you discover how to do it.
That’s so awesome to hear! Thanks so much!
Tamar,
I stumbled across your videos when I was looking at different crosscut sled designs. I enjoyed how you came across in your video and conveyed your idea. I also enjoyed your energy and how you were so willing to show your little foibles & struggles. All too often people (myself included) will allow the fear of making a mistake keep them from trying something new or challenging themselves. So showing your humanity as an instructor really sealed my respect for you. Another thing I greatly respect about you is the cleverness & ingenuity that you display so well in this video and others! Your problem-solving skills are impressive as is your humility & integrity for giving credit to those whose ideas you incorporate in your designs. I look forward to further content from you and am sure that in a short time you will be known as one of the premier woodworking content creators out there. Keep it up!
Warm regards,
Glenn
So awesome to hear. Thanks for the kind words!
Love how you teach. The excitement in your voice transfers to me.
That’s so awesome to hear! Thanks!
@@3x3CustomTamar Not just teach but inspire!! Thank you and keep doing what you do
Rumusic ☺️☺️
I love how you showed there was more than one way to get the same results. A lot of people say it can be done differently but don’t actually show it. I may have to try this when I’m no long an “essential employee”
Oh no! Stay safe out there!
At first I couldn't wrap my head around it, I thought the joint had depth and width in the thumbnail.
Yeah. The 3 colors kinda makes it look 3D
Same here, I thought it was a 3D joint, like a table leg to the skirts.
Optical illusion. :)
Totally possible to do in 3d, but I doubt it'll be strong to function as a joint. Just a showpiece.
@@Brickzie Now you'll get her figuring out how to make it.
Hi, Tamar,
I love the way you invent things while you're working.
You are a very skilld woman.
Thanks for sharing.
Keep it safe
Willy from Belgium
😷😷😷
Thanks! It’s always fun to figure this stuff out. Thanks!
@@3x3CustomTamar You are a dream.
Willy from Belgium.
😷😷😷
@@rodjackson6587 Hi,
Nice to hear you had Belgium ancestors, and Yes, this was the Flemish way to bring up your children.
I was born in 1951 and brought up the same way. Our teaching is still of a high level. Above all I like to see her working, women with tools I love to see them, I think they are sexy.
Today was announced in the newspaper that the curve of people who died of Corona is getting stabel. Everybody follows the rules and the Police takes care of the offenders.
Greetings from Belgium and keep it safe.
Willy from Belgium (Gent).
😷😷😷
@@rodjackson6587 Thanks Rod.
I looked the name up, could not find anything.Was he Jude? His name sounds like it. Did he live in Antwerp, because there is still a large Jewish community there. Also nice we both have the sam year of birth. I was born on 15.04.1951.
community there. Also nice we both have the sam year of birth. I was born on 15.04.1951.
Keep it safe
Willy, still from Belgium.
😷😷😷
@@rodjackson6587
It was the name that gave me the idea, but 'What's in a name?'. Indeed, Haarlem is Nederland (Holland).
He must have been a tough guy, the endurance of the people, especially the soldiers in the first World War was phenomenal.
It will stay a question where he was born, this is not important. What is important, that you have Flemish blood, the only population that stopped Julius Caesar
"Alea iacta est"
Keep it safe.
Willy from Belgium
😷😷😷
The first image of the joint looked like a corner joint (3D) to me at first, rather than a flat three-prong thing. That got me wondering how to make that same look in a corner joint. Using balsa wood, I figured it out, but not sure how strong it would be (But it looks cool). I would love to see you experiment with that look as a corner joint and see if it can be made strong enough for practical use. I can send pics if you want of my balsa wood test.
Yes that's what I thought too - i dont see much application for the joint in this video.
Ken Heart I have seen something similar under a round coffee table with three legs
@@jurockclimb I suppose there might be the odd application!
Yeah thats what i thought too.😂. This kind of joint is not really used too often.
@@Beevreeter I could see it as a neat center support under a glass table. I don't Think it would be useful structurally but it would look nice.
I'm really impressed how you try different techniques and finding improvements and commenting on them as you go. A master woodworker just gave me a lesson for free.
So awesome to hear! Glad you liked it
Thanks for using the squares to setup the initial layout! Enjoyed learning how to use a template with a router too. I would have assumed chisels and saws to do the work.
Well thanks for making awesome tools!! 🤘
Seen a few of your experiments with jointing now. I'm more or less strictly a hand tool woodworker but you've given me some useful tips. Thanks.
Awesome to hear
I wish I was half as skilled as you are. My compliments for this Great job. Greets from the Netherlands
Thanks!
The best part is the challenge of figuring out multiple ways to cut this. And then adapting to your own shop. Well, also implementing it in a real project at some point! Thanks for the excellent video
For sure! I’ll have to think of a project to incorporate this into! Thanks!
I just want to know what those tools you used right at the beginning to mark the centers and angles are called.
I love how you unpretentiously explain every little bit like I’ve never seen anything before but am totally capable of learning it if you just give enough detail, because honestly that’s all true and I’ve learned more from just a few of your videos that most any others I’ve watched. Keep it up.
Awesome to hear! Glad you’re finding them useful!
I love your channel, I always feel like I getting a lesson in master woodworking. Thank you for sharing. I also love the DFM Square System you are using. They make awesome tools.
Thanks! That’s so awesome to hear! So glad you like the videos. And yes. Their squares are awesome
You, my Lady, are dabbling in the ancient art of Tsugite, or Japanese joinery. The geometric combinations are interesting to say the least. Fine job you did on the three way diamond joint in your video I found.
Every video I watch of yours I spot a new tool, jig or technique that always makes me go "of course!" Super appreciate how well you illustrate and communicate your build process - so much to learn and be inspired by. Also, your kid's doodles on the work bench are great :)
Thanks so much! So awesome to hear. And yeah. It’s the only way they stay quiet while I’m working 😂
I love that you just cranked out a jig so simple and quickly. I always overcomplicate things and it makes me waste a lot of time but I'm sure that will get better with skills and practice. Thank you so much for the information!! This is definitely going into my diy folder to try out later.
Awesome. Yeah! I always try to keep it as simple as possible
That could go on those "super satisfying" videos 😍 good job on the execution!
So glad you liked it. Thanks!
Nice work. I enjoy the fact that you are enjoying the finished product that you created with your own hands. Keep on learning!
13:58 that moment where all the pieces fit nicely together...wow...so satisfying! :-) love this. needs a lot of patience but so worth it.
Yeah! It was so satisfying to watch it all come together!
I expected an angelic chorus to chime in to add the appropriate gravity to that moment
Nice hand work Tamar! Really nice that you demonstrated different methods to accomplish this joint. Very cleaver
Thanks! It was really fun to experiment
This would make a great table center. Just do like individual pieces in between each arm. Sand it stain it. Bam new table or end table
For sure!
The moment of connection amazed me, brilliant!!!
I think, it will be a amazing beautiful joint for the corners of a Geodome, with a little bit change of the angles.
Glad you liked it!
3 way lap joint sounds like a certain type of club.
Been there done that, costs 2 songs LoL
😂
Lmao
Loved seeing how you tried and succeeded in doing these joints in different methods.thank you
So glad you liked it because I liked doing it. Ha
Initially I thought it was like a 3 way miter joint like I've seen in table legs. Almost has a three dimensional look in the picture. But I wonder how this would be used in actual practice. Very nice. Can't wait until the next video.
Thanks! Yeah. The 3 colors kinda makes it have a 3d effect. Keith from kjsawdust is using this joint for a 3 legged table he’s building
I'm so glad I found your channel. I freaking love your approach to problems. I've been doing wood working for years as a hobby and still learning. Every video of yours I pick up a little nugget or information or a handy tip. Been binge watching. Thanks for the content
That’s so awesome to hear. Thanks so much!
"These past couple weeks have been a little bit crazy no?"
2 months later: hold my beer
Ha... yeah... I'm bracing myself for what's next.
Really you make this work?
lol 2 months
@@paulstephan8463 haha, the blissful ignorance we all had at the start of April - "it'll all be over by summer!" :-)
I was looking for a 120 deg three way joint for a shop stool design and to my surprize you came up in the search. It not only is a solid joint for the three leg braces but the joint makes the stool look unusual which is always good. Thanks for the videos, I admire your enthusiasm and sense of woodworking adventure. 8^)
awesome! Glad you found the video useful!
I’d call it the ‘Isle of Man’ joint.
Ha! I like it
3x3Custom - Tamar Thank you Tamar. I really enjoy your channel. You provide me lots of advice and inspiration. My new toy for this weekend is a wood burning pen kit.
like their flag...
Jan Simonsen awesome. Have fun with it!
3x3Custom - Tamar I will Tamar. I’m fairly new to woodworking, but I’ve been doing calligraphy for decades! I can’t wait to put them together.
That is a great joint for many cool stand type applications.
Could use it as a three section lazy Susan cutting a nice round trim to match the dividers doing a tenon or half lap to join all the pieces together cutting a channel into the sides of the wood adding a 1/8-1/4” bottom.
You could even create an inlay effect with a darker wood to add some flair.
So many options!
That would be super cool. The inlay part sounds killer
Me, I'd called it "The Bermuda triangle" 😁
😂
I really like the way you discover different ways to attach this challenge. You've got an inventive eye and a sharp mind. That jig alone blew me away. Then seeing you could make the single cut... then using different woods... then ... Nicely done, kid.
Haha! Thanks! So glad you enjoyed. I love figuring this stuff out
Please allow me to express my admiration for your skill and intelligent approach. You are VERY good and watching you work is most enjoyable and intellectually stimulating. Thank you and keep at it. Congratulations !
So awesome to hear! Glad you like it!
Hi Tamar!! I totally enjoy your videos. You’re finger joint video really help me out... I’m a total novice when it comes to woodworking so I’ve been watching all your videos since I subscribe to your channel last week...Your so talented and I love how you tackle a challenge.. I’ve learned a lot in a short time, and I give you all the credit... keep up the amazing work.. You give me that ‘‘ I can do it Attitude’’ THANKS!!
That’s so awesome to hear! Thanks so much! It’s the most rewarding hobby to get into!
Really neat joint. I appreciate how you talked thru your reasoning for the different approaches. Stay safe!!
Glad you liked it!
I admire you doing what you do the way you do it and share it with us. First time watching.
So awesome to hear. Thanks!
I love the problem solving skills you use, and also, the wooden mallet, and also the battery powered router... excellent!
Haha! Thanks to much! ☺️
You look so happy at how well it turned out. Congratulations hoping you find some great uses for it.
Thanks!
I like the roominess of your shop, and some of your cool tools Ms.T. Flex your woodworking muscles! Cool project as always!!
Thanks!
Amazing!! I watched you cut out the first piece, and thought, “I think a router with a jig would be a better method. Then, guess what? There you go!!!!
Hahah! It’s always fun to experiment with this stuff
Perfection doesn’t exist in this world but, trying to reach for it, brings you among the best and You’ve reach that level!
☺️☺️☺️
it’s really satisfying seeing how you organise yourself and use tor tools to make your cuts super accurate?, you make it seem very doable!
Glad you like it! It’s always fun to do things like this
You got an angle indicator! Awesome! You are rocking the shop today!
Haha!
You and the kids too Tamar stay safe, and its a good learning experience.
Thanks! You too!
I love the geometry & trigonometry lessons of these videos. Thank you.
So glad to hear!
Keep up the AMAZING videos Tamar! We love every single one!
Thanks so much! So awesome to hear!
Where do I find one of you 30 years ago? Love these videos. Great Job. Calming & Extremely smart.
Tamar, you ARE an inspiration, even to a 73yo woodworker who has 55 years of experience. Thanks.
Awesome to hear!
Just want to say, I discovered your video's by random & I find them very enjoyable to watch. I love to work with wood & some of the things you do, never occurred to me to try. And as an Englishmen in the UK, we like to have a go at just about anything. So keep up the amazing work :)
Glad you like it! Thanks!
You're very talented . I used to do woodworking down my basement just for fun . my ex-wife sold everything . Watching you gives me the incentive to start again ... Just for fun.
Glad the videos are inspiring! Sorry about the x wife and the tools... ha
It's called the " ménage à trois" joint. Yes. Yes, that is definitely the name.
While u were cutting by hand I was designing a template for routing with a pattern bit in my mind. So cool that u proceeded to do exactly what I imagined!
Ha nice
Found your channel from the great guitar build off. Really cool. As a hardwood flooring refinisher and amateur woodworker very informative stuff.
So awesome to hear! Glad you like it
That was so fun to watch. Thank you so much for sharing! Absolutely love your videos!!!
Phenomenal job. Your passion for your craft really shines through strong. Say safe my lady. God bless.
Thanks! 🤘
Thank you! I've missed your content over the last weeks, and was sincerely hoping it wasn't because you're battling infection. I trust you and your family stay well. Your work always inspires me to be a better woodworker and try new and innovative things...
Thank goodness we’re all still ok. But we live just outside it NYC. So it’s a bit scary. I’ve been quiet because I have been trying to figure out how to schedule in my woodworking while homeschooling my kids.... well get through this. Ha
You and your family stay safe, and its a good learning experience. I see you from Canary Island. Gran Canaria, Spain.
Thanks you too!
It is always such a pleasure to watch you discover and do. I also loved how you brought the router into play. I just got my first router!!! 🤓 Thank you for all your hard work in making such great videos.
Your life is going to change!!! Routers are the best!
Your experimental videos are always so much fun!
Thanks! Glad you enjoy them as much as I do! Ha
Your method is good. Thanks for your tips.
You never cease to amaze me. Your joint's looks awesome. And like your merch line as well...have a safe weekend,and yes i want that center finder...lol
Thanks! It’s a handy little tool!
That is such a good joint when I first saw it I visualised it as a corner rather than flat. Thank you
I see that now. Ha
Great job and very nice joint. I liked this format of explaining as you were going.
Thanks! Good to know! It’s easier for me than doing a voiceover after the fact
Excellent video and editing, and, of course, your woodworking skills are outstanding! Great job.
Thanks so much! So glad to hear
Nice job Tamar, I guess we will soon see this joint in one of your projects! I remember you saying on a video some time ago "I need to practice and improve my skills with chisels", seems like you definitively got it now! Stay safe your familly and you! Greets from France
Thanks! You know what they say about practice. Ha. Kidding. I can always use some more!
That awesome incra miter gauge has a built in super precise micro adjustment in it, check the stop block, from the position you use the gauge, the stop block has a horizontal screw on your left, that is the micro adjustment screw, tighten it to cut more, loosen it to cut less, you will need to also loosen the two screws on the top of the stop block to allow this movement. It is awesome!
It does!
if you chisel out the leftover waste in the corner left by the router bit before you take off the template it works as a guide
Wow, I'm very envious of your skills and your set-up!
☺️☺️
Typical (from you) excellent video. Great to see your work holding and approach in general. Never have seen the small carpenter's square with a moveable pin. Seems useful. I want my daughter to watch your videos so she knows no gender barrier to being a woodworker! Glad you are well and happy.
Thanks so much! Out of all my kids, my daughter spends the most time with me in the shop ☺️
Thanks for this.. Always wondered how to perfect a 3 way flat joint.. This is far better than anything I came up with so far.. Good job..
Awesome. Glad you liked it!
Love the knife walls/relief cuts
Thank em was fun to do ☺️
Cool Great Job . I see the moxon vice is coming in handy.
It sure is!
Your good at that nice one ,passion for your work makes a diffrence
Thanks!
I like the look of the marking out tools
Yeah. They’re cool 😎
I'm not sure if anyone mentioned this or not, but this joint works with almost any number of boards. So long as you follow some basic math, take the number of boards desired and divide 360 by that number. That will be the angle of the first cuts you need to make. So if you wanted 6 boards for a really decorative piece you would need 60 degree angles instead of the 120 that were used.
This ends up being a rather beautiful piece if done correctly, also odd numbers will almost always look better than even because one of the boards will always be centered.
By adjusting the Maximum angle you can also do some really unique designs, such as a starburst pattern by just dividing by 180 instead of 360. The rest of the process remains the same regardless.
I love these "figure out the joint" videos. Thank you.
So glad you like them because I have fun making them! Ha
I love your tenacity! Great as always.
Thanks! These are always so fun for me
Your saw and its accessories are awesome
I’ll keep em. Ha
@@3x3CustomTamar who is asking you to give em
Nice Joint. I love watching what you come up with.
Thanks! I have fun trying to figure it all out!
Enjoy your videos ....hope you keep posting ...Thank You
Thanks!
Does anyone else enjoy playing this while you're sleeping? It's so peaceful!!
I love that joint. Thanks for sharing. Love the jig too. Neat idea.
Thanks! Glad you liked it!
Nicely done young Lady!
Thanks!
You rock! Very inspiring for a beginner!
Awesome video!
I want to try that and use it in a pattern for a cutting board
Thanks! That would be very cool!
You're so smart! I love seeing you create jigs and work through joints.
Thanks! Glad to hear ☺️
I like how you tried different methods!
Thanks! It was fun to experiment. ☺️
Inspiring as always. I WISH my first time trying things looked as clean as that joint!
Oh, and have you ever thought about using a bench hook to secure your work piece for that kind of work? I don't cut joints like that, but I find them super useful for cutting dovetails, which are similar. Anyway, nice work as always.
Thanks so much!
I wonder if an oscillating tool would be useful to hog out material if one were going the non-jig and router route. However, the flush trim bits are amazingly useful. I have a freud one that is 2.5in tall with bottom bearing.
Nicely done Tamar. I hope you can use this in a future project. Stay safe!
Thanks! You too!
Nice job. That’s a neat joint. I’m not sure where you ever use it, but woodworking is fun whatever you’re doing. Thank you and be safe.
Thanks! My friend Keith from kjsawdust (the Instagram account I mentions in the end) is using this for a 3 legged table.
I like that little blue centering jig!
Yeah!
The Tamar Triple Joint !!!! Excellent work !!!
Haha! Thanks!
Crazy joint!
The router rules but as always, your hand chisel skills are always impressive and fun to watch
We are quarantined as well and catching up on projects.
Stay safe and healthy to all
Stay safe!
Very interesting. Now you have to come up with a project to utilize this joint!
Oh for sure!
From the thumbnail, I thought this was going to be something completely different. Not at all disappointed! I watched it a second time and it made a lot more sense! Time for new glasses I see! 🤓
Ha! Glad it didn’t disappoint!