What about an Evil Pimp. Picked one up for cheap. As I broke it down, rings were missing, metal was marred, some orings turned into straight gel. (Heebie jeebies) swapped everything according to the manual, sizes, etc. Unfortunately the reg (detonator) is K.O'ed I believe. Go to gas up the marker, air leaks out the reg. Then swap the regulator and put say, a MaxFlo reg on it that works, and air gets trapped in the reg and doesn't proceed into the marker. Ope.
i just got my spyder victor gun and i tried settinh it up and stuff but when i tried shooting it it did not shoot like how a paintball is supposed to the ball just came out with no pressure i put in the tank and idk how to make it work
So my dye DSR will shoot when I turn on my ASA even if the gun is off will start losing gas then when a ball gets in the breach it will stop very weird issue any suggestions
My o ring on my spyder mr1 hammer was rotted so I bought a new o ring from Ace hardware and it wasn’t pressurized and when I pulled the trigger the balls just dropped right out the guys at the field I go to recommended getting the exact o ring for the spyder would that be better than getting the kit?
Yes the manufacturer has the exact size that you need. But you should Google or download the schematic for the gun and it will tell you the exact sizes of every O ring in the entire gun. Then you can get a proper kit and do your thing. That is my unprofessional opinion.
Hello great information thanks so much. Tony can you tell me where can I buy a O ring kit like you have please. Also what are top 3 O ring manufacturers in your opinion. Thanks in advance.
Richard Nixon Da lll you can probably get them from the lone wolf website, and whatever on there is good. Tony only buys the good stuff for his company
I HAVE A QUESTION when I attach my air tank to my gun it wouldn’t shoot the tank is new I tried it on other guns it works but on my gun it wouldn’t shoot idk if the part that connects to the tank is broken or something can anyone help me ?
My damn shockr just took a shit on me, sent it to my local shop they didn’t fix it! Now they have it again, so I was like no biggie got my axe 2.0 and now this is not working, new hopper cause that’s what I was told to do so now I have a spire 4 and still nothing !!
Nice tips to learn. Not new to airguns but paintball is fresh to me. I was donated a 10~ year old tippmann 98 that was never serviced, and it has no issue so far. I should clean and grease it up and see what happens. Currently have a 13ci hpa tank on it regulated at 1100psi, along with the gun screw fully open. Using a DB meter it's about 2%~ quieter surprisingly but higher pitched with HPA (or because it's 1100 vs 800~ psi). Only "upgrade" besides the hpa tank is a FlatLine barrel which I would never recommend. It explodes balls freaky fast directly at the first bend even with really hard shell ammo(like frozen balls...)
I got a question. I'm shooting my Shocker XLS and everytime I go to chrono, my first shot is always about 25 to 30 fps over field speed, but every shot after that is just like normal. Is that something to be concerned about or is it just something that's gonna happen and I dont need to worry? Well maintained gun the refs just don't like it when they see 313 pop up on their chrono when field speed is 280. Thanks
Kyle O this is known as first shot drop off. It is not detrimental to the gun, but like you said it can be annoying. There are a lot of possible fixes that have been documented but usually it’s caused from the marker sitting for awhile and the lube getting caked up or due to cold weather. Less lube or a lighter lube would fix this. It can also be the inline regulator causing the issue, in which case you need to clean/lube the reg and possibly replace o rings.
Well got a beauty for back up mechanical JT Tac-5 recon [ Woodland Camo 2.76] I'm brash old 80's kid attitude I say ok time to figure it out hopper ring bad and hammer firing ring so i got one video saying never mess with velocity screw thing was if i did know renoob [amnesic] was right at body level i suggest a go over with adult if child could have been bad child new toy play a used marker can be dangerous ; question on Tac 5 i have stock it looks as if drive may let gas escape housing at you colter bolt oh special bead one Love It, tip e99 with injury hopping around few too many markers starting anyway just ER2 and ER2S used 2 Love it ER2 it's ok needs bike clamp for tubes i made sexist Ever E99 feel hose line 1200 psi Trinity not full equipment however JT aluminum It's a Soviet Scorpion or klobb feel i see a shroud Tec 9 full Pimp status for display, no run on reading exists not sentences JT is a Spyder thread. Big Mistake I see ones should label barrel painter tape threading type also if you use on 1 marker if same threading it should work on another marker of same threading. PS hold Virtue Spire IR Cyan my blu tiger yes stock silver but blue black theme the Tac Barrels off the hook with JT 6-20"
🤣 When you said check the battery, I was thinking the same thing. Tongue test 🤣🤣 just getting into the sport; your videos are the best I found so far.
Camera man is the comments I love that beat them too it and show them how they are I’ve started watching you guys good job 👍🏽
How long will it take to get it back ?
people after watching this video: licking batteries
Great advices!
What about an Evil Pimp. Picked one up for cheap. As I broke it down, rings were missing, metal was marred, some orings turned into straight gel. (Heebie jeebies) swapped everything according to the manual, sizes, etc. Unfortunately the reg (detonator) is K.O'ed I believe. Go to gas up the marker, air leaks out the reg. Then swap the regulator and put say, a MaxFlo reg on it that works, and air gets trapped in the reg and doesn't proceed into the marker. Ope.
This helped a lot!!!
Wow, OringMonkey. That takes me back. I still have their mask bags, mask strap, tech mat with the chart... A shame they went away.
I use rechargeable 9v batteries from energizer 600mah
Can you fix a genesis 1 paintball marker?
What happns if an older modle painball gun slowly pushes forward after shooting ..dosent that mean it cant shoot
how do you fix the bolt? Like its to far it wont shoot cuz the paintballs arnt droping down?
i just got my spyder victor gun and i tried settinh it up and stuff but when i tried shooting it it did not shoot like how a paintball is supposed to the ball just came out with no pressure i put in the tank and idk how to make it work
So my dye DSR will shoot when I turn on my ASA even if the gun is off will start losing gas then when a ball gets in the breach it will stop very weird issue any suggestions
@4:46 that part you have in your hand my gun doesn’t want to shoot it gets stuck before it hits the ball what could be the issue?
Can I use vaseline ? Instead of lube?
could you use recorder grease if you do not have any
How do you fix the trigger when it gets stuck
Hi I just bought a jt paintball gun.it has a digital reading on the grip how do I reset it
My o ring on my spyder mr1 hammer was rotted so I bought a new o ring from Ace hardware and it wasn’t pressurized and when I pulled the trigger the balls just dropped right out the guys at the field I go to recommended getting the exact o ring for the spyder would that be better than getting the kit?
Yes the manufacturer has the exact size that you need. But you should Google or download the schematic for the gun and it will tell you the exact sizes of every O ring in the entire gun. Then you can get a proper kit and do your thing. That is my unprofessional opinion.
I have my dad's old spyder imagine and it's having electrical problems does anyone know what could be the problem.
Hello great information thanks so much. Tony can you tell me where can I buy a O ring kit like you have please. Also what are top 3 O ring manufacturers in your opinion. Thanks in advance.
Richard Nixon Da lll you can probably get them from the lone wolf website, and whatever on there is good. Tony only buys the good stuff for his company
@@nate_k9277 thanks Nate will do
My gun fires but does not fire a paintball almost at all I don’t know how to fix it
It has a bolt
Maybe you low on your tank air or co2 whatever you use
I HAVE A QUESTION when I attach my air tank to my gun it wouldn’t shoot the tank is new I tried it on other guns it works but on my gun it wouldn’t shoot idk if the part that connects to the tank is broken or something can anyone help me ?
Same
Kellen The beast it was my on off gauge
My damn shockr just took a shit on me, sent it to my local shop they didn’t fix it! Now they have it again, so I was like no biggie got my axe 2.0 and now this is not working, new hopper cause that’s what I was told to do so now I have a spire 4 and still nothing !!
i bought the empire
mini gs and i feel like it doesn’t shoot as straight as it should
Why is my bullets getting stuck in my geo 4 barrel
Nice tips to learn. Not new to airguns but paintball is fresh to me. I was donated a 10~ year old tippmann 98 that was never serviced, and it has no issue so far. I should clean and grease it up and see what happens. Currently have a 13ci hpa tank on it regulated at 1100psi, along with the gun screw fully open. Using a DB meter it's about 2%~ quieter surprisingly but higher pitched with HPA (or because it's 1100 vs 800~ psi). Only "upgrade" besides the hpa tank is a FlatLine barrel which I would never recommend. It explodes balls freaky fast directly at the first bend even with really hard shell ammo(like frozen balls...)
lol you buy a new gun and they send you one of each o ring. no rebuild kit i’ve seen
Most "industrial" are same as heavy duty I didn't know energizer were not... heavy duty are for shitty little lights and things that barely need power
You can’t go in dry
My 170r is leaking air
I got a question. I'm shooting my Shocker XLS and everytime I go to chrono, my first shot is always about 25 to 30 fps over field speed, but every shot after that is just like normal. Is that something to be concerned about or is it just something that's gonna happen and I dont need to worry? Well maintained gun the refs just don't like it when they see 313 pop up on their chrono when field speed is 280. Thanks
Kyle O this is known as first shot drop off. It is not detrimental to the gun, but like you said it can be annoying. There are a lot of possible fixes that have been documented but usually it’s caused from the marker sitting for awhile and the lube getting caked up or due to cold weather. Less lube or a lighter lube would fix this. It can also be the inline regulator causing the issue, in which case you need to clean/lube the reg and possibly replace o rings.
Maximillionairr but it’s not drop off, it’s shooting 30 FPS Faster, not slower
Millisecond is 1/1000 of a second.
Maybe put the camera on a stand and you can both sit there and talk it through. Positive FB, I'm not being a douche. X-D
mo lube mo better LOL
Well got a beauty for back up mechanical JT Tac-5 recon [ Woodland Camo 2.76] I'm brash old 80's kid attitude I say ok time to figure it out hopper ring bad and hammer firing ring so i got one video saying never mess with velocity screw thing was if i did know renoob [amnesic] was right at body level i suggest a go over with adult if child could have been bad child new toy play a used marker can be dangerous ; question on Tac 5 i have stock it looks as if drive may let gas escape housing at you colter bolt oh special bead one Love It, tip e99 with injury hopping around few too many markers starting anyway just ER2 and ER2S used 2 Love it ER2 it's ok needs bike clamp for tubes i made sexist Ever E99 feel hose line 1200 psi Trinity not full equipment however JT aluminum It's a Soviet Scorpion or klobb feel i see a shroud Tec 9 full Pimp status for display, no run on reading exists not sentences JT is a Spyder thread. Big Mistake I see ones should label barrel painter tape threading type also if you use on 1 marker if same threading it should work on another marker of same threading. PS hold Virtue Spire IR Cyan my blu tiger yes stock silver but blue black theme the Tac Barrels off the hook with JT 6-20"
get a new camera man lol