Amateur printer enthusiast here. I came here to find out about Sunlu but walked away with better knowledge about calibration. I know that wasn't your intention but I have not touched the calibration/ flow rate functions yet. Thanks!
I received my first order from sunlu PLA META 10K, and yesterday, I ran a print at Ludicrous speed, and I have to say I was impressed. I also ordered 10k silk that will be here on Thursday. Thank you for all of your hard work in making all of these videos. Thank You!!!
Great videos and thank you for them. I’ve noticed on the lithophane video and this one, you set the plate to cool plate. Is there a reason for that and are you really using a cool plate? I don’t have the X1C, but I do have the P1S.
I've been a big fan of esun since getting my X1C. I used to only use polymaker before having an AMS. I'll have to try sunlu out now! Also been curious about inland myself as i have a microcenter about 40 minutes away.
hello! did you make any changes to any of the settings with your sunlu prints? Ive been trying to use sunlu and the print is not smooth at all so im not sure if it needs to have any setting changes..
Personally I've used Sunlu, Overture and Polylite PETG and Sunlu is just the standard for me with my X1C. Overture is decent but hates to go over 10 mm volumetric speed and Polylite cant even touch anywhere near 5mm volumetric speed.
Another great cheaper filament is the Elegoo PLA...LOVE that stuff and can go for 10-15 a roll. ONLY issue I ever see is the fuzzy stringing but that's more on my ender 3 S1 pro. The P1S don't seem to get that. either way a quick blast of the heatgun and it's gone so... I'm a fan of it as well...great stuff!
Amateur printer enthusiast here. I came here to find out about Sunlu but walked away with better knowledge about calibration. I know that wasn't your intention but I have not touched the calibration/ flow rate functions yet. Thanks!
For such an in-depth review, I think Sunlu should have sent you more than two sample rolls! ;-)
Great video. New Bambu A1 I didn't know all that about calibration or Sunlu. Now I do! Great speaking voice too. Keep making videos! :)
I received my first order from sunlu PLA META 10K, and yesterday, I ran a print at Ludicrous speed, and I have to say I was impressed. I also ordered 10k silk that will be here on Thursday. Thank you for all of your hard work in making all of these videos. Thank You!!!
What vol.speed setting are you using? Not the default generic 10 I presume?
@@gizmofactory I'm using default settings since I'm new to 3D printing.
I don't know if it's good or bad LOL
Thanks for sharing!
Great videos and thank you for them. I’ve noticed on the lithophane video and this one, you set the plate to cool plate. Is there a reason for that and are you really using a cool plate? I don’t have the X1C, but I do have the P1S.
I've been a big fan of esun since getting my X1C. I used to only use polymaker before having an AMS. I'll have to try sunlu out now! Also been curious about inland myself as i have a microcenter about 40 minutes away.
Inland is Polymaker - right now.
How to print by object...great tip...so many different settings, it's a little intimidating.
Glad it was helpful!
I learned a lot from this vid - thanks!
what kind of roll/spool is the filament on?Great video, Thanks
Thank you, Len. Wonderful channel!
hello! did you make any changes to any of the settings with your sunlu prints? Ive been trying to use sunlu and the print is not smooth at all so im not sure if it needs to have any setting changes..
i didnt change any settings other than calibration.
Nice review! "Print by Object"....THANK YOU FOR THE AMAZING TIP!
Kind of an odd question, where did you get your shirt?
also curious
What vol.speed setting are you using? Not the default generic 10 I presume?
Default
Sunlu prints very well on my p1p and they’re now my go to petg.
please do a review of elegoo filaments. this is one of the best reviews I've seen. thank you
why does my bambu studio not have auto calibration
nvm p1s
Anyone tried sunlu matte on a bambu printer?
why ask them to send you stuff? Is it not more fair if you buy from amazon like most people do?
Envy looks horrible on you, kid. 😆
Personally I've used Sunlu, Overture and Polylite PETG and Sunlu is just the standard for me with my X1C. Overture is decent but hates to go over 10 mm volumetric speed and Polylite cant even touch anywhere near 5mm volumetric speed.
It seems bambu's filaments are made by sunlu
I have heard that but not from them
is it just me or they dont ship to canada?
I'm not sure.
❤Thank you all for loving our products!😽Let's enjoy the 3D printing together!
Today we test sunlu filament ? , So you have never used any bambu filament ? , because bambu is sunlu filament .
Interesting
@@lendizzle77hearsay at best!
you look high as a kite lol
Another great cheaper filament is the Elegoo PLA...LOVE that stuff and can go for 10-15 a roll. ONLY issue I ever see is the fuzzy stringing but that's more on my ender 3 S1 pro. The P1S don't seem to get that. either way a quick blast of the heatgun and it's gone so... I'm a fan of it as well...great stuff!