Hello. In my case, there was no sound in one of the channels at the output of the power amplifier. I replaced the LDR variable resistor with a new one. If there is no (new) one, you can take it from the next row (that is, solder it)
Приветствую! Попал в руки данный аппарат. Сзади подключаю speak-on к CH-A - всё работает, к CH-B - до подключения колонки фонят, после защелкивания перестают, но звук не идёт. Это что-то внутри или какой-то есть секретный переключатель?)
Не могу подсказать тебе, этот аппарат чинил из-за отсутствия звука в одном из каналов (заменой мастер переменного резистора на 10К вроде). Переключателей нет как помню.
The fan is on the right. You either need to crawl up with your hand and unscrew it with a small screwdriver. Or remove the lower board with the radiator completely.
there was a problem with one of the output signal controllers, there was no sound in the left channel. I replaced the resistor with 10K, after that everything worked normally. the reason was due to oxidation of the contacts in the variable resistor itself.
I also have this problem, what should I do if you can help me, thank you
Hello. In my case, there was no sound in one of the channels at the output of the power amplifier. I replaced the LDR variable resistor with a new one. If there is no (new) one, you can take it from the next row (that is, solder it)
Приветствую! Попал в руки данный аппарат. Сзади подключаю speak-on к CH-A - всё работает, к CH-B - до подключения колонки фонят, после защелкивания перестают, но звук не идёт. Это что-то внутри или какой-то есть секретный переключатель?)
Не могу подсказать тебе, этот аппарат чинил из-за отсутствия звука в одном из каналов (заменой мастер переменного резистора на 10К вроде). Переключателей нет как помню.
How do you get access to the fan? I want to replace mine with a silent one.
The fan is on the right. You either need to crawl up with your hand and unscrew it with a small screwdriver. Or remove the lower board with the radiator completely.
Kann mir bitte jemand sagen wie viel Ohm der R29 auf der Platine hat?
Hello, I can't tell you right now. I just read your comment. Have you found the answer to the question?
Не было звука в одном из каналов, причина - регулятор на 10 K, окисление. Тайм код 1:18
sir this mixer mute problem
there was a problem with one of the output signal controllers, there was no sound in the left channel. I replaced the resistor with 10K, after that everything worked normally. the reason was due to oxidation of the contacts in the variable resistor itself.
Same as mine looking at all those internal fuses I was wondering if it’s one?
@@johnmartin8164 No, there are fuses inside and outside
The best machine ever
I also have this problem, what should I do if you can help me, thank you