Basic LightBurn Device Settings for Fiber and CO2
Вставка
- Опубліковано 9 лип 2024
- This episode will be a brief overview of the LightBurn Galvo Device Settings!
The channel, staff, communities, web services... everything. It's all here thanks to the LMA.
► Consider Supporting Us: masters.lasereverything.net/
► Red Light and Workspace Video: • Red Light Pointer and ...
► Lens Correction Video: • FIX your Galvo Laser F...
► Laser Timing Video: • The COMPLETE Guide to ...
❤️ We're probably earning money when you buy stuff we link. ❤️
✨As Amazon Associates we earn from qualifying purchases.✨
You're going to love this content too!
► FULL LightBurn for Galvo Playlist: • LightBurn for Galvo Cr...
► NEW MakerREMIX Channel! @MakerREMIX
► Laser Everything Linktree: linktr.ee/lasereverything
► Laser Source Linktree: linktr.ee/lasersource
We have SO MANY Laser Resources:
► Our Market for Laser Stuff: market.makerremix.com
► Become a Market Vendor: market.makerremix.com/pricing
► The 2023 Buying Guide: buyingguide.makerremix.com
► Join the MakerREMIX Network: makerremix.com
► Join the Discord Server: / discord
► Join the Facebook Group: / lasereverything
► FREE Laser Engraving Starter Settings Packs: www.lasereverything.net/free-...
► Community Fiber Library: lasereverything.wpcomstaging....
► Community CO2 Library: lasereverything.wpcomstaging....
► Community UV Library: lasereverything.wpcomstaging....
► Laser Source Podcast: lasereverything.net/podcast
► Laser Everything Merch: makerremix.com/merch
0:00 - Intro
0:24 - Device Settings Overview
1:36 - Field
1:50 - Angle
2:05 - Red Light Settings
2:50 - Lens Corrections
4:29 - Other Options
5:06 - Laser Source Configuration
6:23 - Frame Speed
6:49 - Frequency Range
8:11 - Tickle and FPK
9:28 - IO Ports
11:09 - Jump and Delay Settings
12:20 - Additional Settings
13:16 - Final Thoughts
15:01 - Outro - Supporting the Channel
Listen up! Laser engraving machines are inherently dangerous. The content this channel is for educational purposes only. Laser Everything LLC can not be held liable for any harm caused to any individual or personal property related to settings, activities, procedures, techniques, or practices described in whole or part on this UA-cam channel. By watching this video you agree that you alone are solely responsible for your own safety and property as it pertains to this content. Do your own research before purchasing machines, materials or accessories. LE is viewer supported and probably earns commission when you buy stuff we link. - Наука та технологія
Thanks for all the great information! I was wondering if anyone can tell me how to check my galvo's wattage? I purchased a 50w but it doesn't seem to have enough power to cut anything.
I just added a COR file to my Lightburn and now my axis have flipped. an image is backwards and sideways, how can I fix this, or what did I do wrong? Thanks guy in advance, this has been an amazing channel.
I set up some blank saved sheets save as material. That saves time when doing job’s. Just remember to save a new job under it’s new name.
These videos are great. Thank you for posting them. I got my 30watt fiber laser doing everything except I can't get any power. When I hit Start I can see a faint white light trying to mark but I just cannot get any power out of this thing. It works great in Ezcad. I have copied the ezcad file markcfg7 into Lightburn, I have changed the Fiber Type setting to all 4 of the choices and have changed the Max and Min Freq to match what they are in Ezcad. Nothing works. I still can't get my laser to fire with enough power to even mark my steel. I do not have ezcad installed on the computer that I have lightburn on. Can you please help me? I do have lightburn on another computer that I run my diode lasers and I don't have any problems.
Just taken delivery of a co2 galvo with 110 x 110 lens, cut out some small squares on the extremities of the area, but the cut was slanted and the shapes came out distorted. Any help how I can a avoid this would be great.
Hello gentlemen. maybe you can help me how I can make stickers with my co2 galvo laser (with or without transfer film). you may have already made a video of it. I don’t know where I can ask such questions. Greetings from Holland👍
I have an Omtech FM7979-S 50W Fiber Laser Machine. I was using Lightburn at first, then had some issues when it updated. I switched to EZCad2, then having issues with inconsistent marking. So I'm switching back to Lightburn, but I tried to import the io port info and it didn't import. I can't find the information anywhere. I searched the OMtech site and support sites, nowhere to be found. Can you help out please?
I have my fiber laser rotated 90 degrees do to space. all I have to do is mark galvo 2 is x axis, or is there more settings to be changed? keep up the great work you do on your videos
That's a fine way to do it. Alternatively you can change the angle field in device settings to 90 or 270 degrees depending on how it's oriented but if it works it works :)
@@LaserEverything thank you and thank you for all you do. 😎
I just setup mine, i could not find that file .cor but i used markcfg7, my 30w jpt is up to 600 freq. I checked in ezcad and in the documents provided by the supplier and it is correct. What is the difference between galvo 1 and galvo 2 ? Mine by default is galvo 2, thanks for the videos 😍
Galvo 1 and Galvo 2 are the two physical mirrors inside of your galvo head, just depends on how they are oriented which will determine if things are displayed appropriately or reversed. We get into how to generate corfiles a little later in this series so definitely watch the whole playlist.
Greetings . Where can I find the option for Vector Settings in Lightburn
What specific setting are you looking for? We can't really get into it in the UA-cam comments as it's not the best place for more intensive support threads but we do have a few options where you can get help. Either check out Discord Server or Facebook group - links in the description - or you can check out our new forum over at www.lasereverything.net/forum and I'm sure we can get you pointed in the right direction.
My OMTech 30w fiber laser is not firing… not sure if I picked the correct laser source? Any suggestions
If you're using JPT or Raycus try one of the IPG serials instead. Often the issue and an easy fix if so.
Thanks for all the tutorials, i was just a bit used of ezcad but discovering LB now, i did have a question regarding a field/lens problem, i have loaded the config files from my 300x300 lens (ftetha 420) ezcad settings but in LB the size is not correct when i mark for example a square or rectangle, also the skew seems to be off, when i draw a size 50x50 mm i get 57x57, if i change the field size to 345mmx345mm itr is slightly off, any ideas how to get this sorted or does it also has to do whit the skew ? thanks again for ur effort, will join ur page tonight again, quiet since you went away at your patreon
For tech support please join the Discord Server or Facebook Group, links are in the description :)
Thanks but got it solved now
I have a galvo 100w co2 . Cannot engrave text heigh 10mm . It looks very blurry, you cannot read it. I observe the laser line width is quite thick. What can cause this ? Is there a setting for a thin line?
Are you sure you're in focus? If you are it's probably due to your galvo head. You're likely using a low X beam expander and a 10mm head. CO2 galvo typically requires a much larger beam expander which means you'll need a larger galvo scan head as well. We go over the process and results in detail here: ua-cam.com/video/fRc9miHIwkU/v-deo.html
What would I need to do if my IO port settings in ezcad are null
Reach out to whoever sold you the machine and ask for the factor default settings for the ports.
Do you HAVE to use EZcad, or can I solely use Lightburn? Brand new 50w fiber, doing the initial setup with little experience. Thanks for all your information you provide.
All you need ezcad for is corfile generation (for now, LB is working on generating corfiles natively) and you'll need either the mrkcfg7 file from the file folder or you'll need to be able to open it up temporarily to manually copy the device settings out for use in lightburn. After that you're free of the chains.
I started with Lightburn, have never used EZcad. Your laser should have come with a USB installation disk with the manufacturers preloaded EZCad and should have the necessary configuration file required to import into Lightburn.
You should also have a sheet with the screenshot of your lens configuration. You can compare the sheet to the imported configuration files that were brought over. Hope this helps.
@@LaserEverything so i did get the USB installation disk with the manufacturers preloaded EZCad, but the files contain items that dont seem to open. including "Lmcv2u", "Lmcvu.sys", "lmcv2uX64" (compressed zip file but wont open), and "WdfCoInstaller.01009.dll".
Any help is appreciated!
It is a Cloudray machine if that makes any difference or helps.
refering to crash course video 3 - I have been getting stumped with getting the BJJCZ device folder to show up
@@scottmathieu5260 Those are drivers folders you're listing. You're looking for a folder called PLUG that should have a file in it called mkcfg7. Make sure you extract the ezcad folder before you go rooting through it if it's zipped. Ezcad doesn't install anywhere it just runs out of the folder wherever the folder is placed. The mkcfg7 file is the one to be imported into LightBurn for your initial device settings. Alternatively bring the Ezcad folder onto a windows machine (borrow one from a friend?) and launch Ezcad so you can inspect (and screenshot) the F3 Param menu as that's where all the device settings are kept.
My Device Settings has an "Enable Blanking" setting. What does that do?
Hey Reggie, I believe this is a newer feature that became available in LB, but essentially allows you to turn off the red dot within the laser between shapes. This would only work if the red dot is wired to a control port on the ezcad controller, and may also simply be unsupported in some cases.
I have a Bescutter 30W fiber. Does 20 to 80 seem right for my min//max KHz/
Bescutter is the manufacturer brand for the assembled laser, but the laser source model is what determines the frequency range, so can't really say for sure without knowing the source model inside the laser. If that came on the spec sheet, that's probably a safe value for min/max to go with, its possible they only offer one source model for the machine series you bought, but I'm not that familiar with Bescutter myself. If you want to be 100% sure, you'd have to remove the side panel of the box with the components in it, and there is a sticker on the laser source with the model information. We have a pretty big list of spec sheets on our website you can confirm from, or reach out in one of our communities through a thread and we can help confirm if you can grab the source model information. if they are suggesting 20-80khz, its likely a Raycus source, so you'll probably be looking for a Raycus sticker.
Thank you @@LaserEverything
Can we hire you for a few days onsite training? I’ll cover lodging. And good day rate.
I can't find min and max freq for omg 50w jpt laser, Anyone know what it is?
50w JPT LP sources are typically 1-400khz
Thanks so much!
I don't find the setting to mirror the work space. The machine laser everything at 90° and mirrored. I did find how I need to rotate the workspace but not mirror. Can someone help me?
rotating 90 degrees may mean you need to switch which galvo is operating as X axis, and then the "reverse direction" will mirror the output. you can reverse each motor independently. If you follow the course further in, this is actually fixed in a later step automatically with corfile
Why didn't you enable the Q-PULSE?
An oversight in the video. If you have a MOPA laser you definitely want to enable it. If you have a q-switched laser you'd leave it switched off.
I should really quit this channel. I thought I had a great laser setup with my 100W CO2 laser and a 30W fiber with a 300x300 mm lens. But then you told us that a smaller lens is better and now you are telling me that LightBurn for FIber is here. So I bought a 110x110 lens, the "everything" LightBurn license and I replaced the "Don't look through this hole with your good eye" label with real laser safety glasses.
I've been binge watching the whole LightBurn for Galvo crash course (that took me 2 days) and got LightBurn to work on my fiber. Now it's time to re-watch some episodes and start optimizing my system.
Oh ... meanwhile the UV laser is also on my wish-list - Thanks again 🤣
Haha RIP sorry about that! It does get pretty addicting!!
Good video - as always. I did discover that you can now do lens corrections in LightBurn. So, info at video mark 3:16 is no longer valid.
Doing lens corrections manually doesn't count as lens corrections in my book. It takes far too long if you have an expansive library of lenses. I am holding out hope for a true lens correction solution in LightBurn.
@@LaserEverything Agreed, but as a new user I don't have an expansive library of lenses. My machine came with one lens so that is all I have in my EZCad2 file that came with it. Shouldn't I just create what I need for a new lens in LightBurn?
Good job, Could I have your email?