I just bought a brand new Hydro Tek mobile wash skid tried it out a few days ago and when I pulled the trigger it like to blew me over in the yard its no toy used the surface cleaner on my driveway with no chemicals and made it like new great machine so far.
I just listened to 'Left in the bottle' from your 'Next Chapter' album for the first time. Awesome song, I love it. The music is great, your voice sounds great. Really, really nicely done.
WUT IT DO BUBBA 🌽 💪💯 My fellow Tennessean go getter I got a few hot water rigs and one with reclamation 👍 for specific jobs we clean However I do a ton of gas stations ⛽️ Yes you have to charge cause it’s EXPENSIVE buying filters and permits and etc etc 👍 WASH ON BROTHER
Dude you have almost everything I have. Thats crazy. I run Kohler 26.5 EFIs with Legacy 10.4 gpm pumps @ 3600psi's. Gotta keep those Mondo 49's happy. But anyway. Just curious to your input to this question. When I'm running my Simpson Commercial Belt drive 4gpm 4200psi machine. It loves to eat the thread sealer until you get a 3' stream of water squirting out the side, we all know how annoying that shizzle is. Happens all the time. I used TFE paste, nothing. Teflon tape nothing, blu teflon tape nothing, Tru Blue paste lasted the longest (maybe a week) but nothing in the end. So I'm curious to what your using for thread sealant. Also I go through male and female stainless steel fittings and brass fittings like candy. I buy bags of viton seal for my female ends by the hundreds. I don't think i ever had a quality fitting that lasted a week. Any personal experience would be greatful. I'm going to try Permatex Thread Sealant next, thats as soon as it gets delivered.
Alright so unloader was set at 4200psi. At the machine i was getting 4200 until i squeeze the trigger then i get 2700. Long story short, ended up being those big fat seals at the top of the pistons. All good now.
Hi! I am just starting to get into pressure washing. And I really don’t want to take the chance to mess up a house. I know how to mix the bleach but if I can just pressure wash it and get the house clean and if I have any tough areas to use bleach is that OK? Or should I be using chemical on the entire house.
@@AaronsLeanMeanAcademy do you have a recommendation for a rig that would fit within my budget? I really value your opinion; I'm hoping to purchase equipment in the next 3 months
Don't care for the free tank, most costumer dond even know🤷🏽 But we, the power wash operators do and that's what bothers us inside lol 😆😆😆 but on the other hand I cand wrap my head on having like 15k on equipment and a water tank on a flimsy trailer. That madness and dangerous.
I prefer an IBC tote. I can’t see spending $500 plus for a water tank. Chemical tanks yeh no problem. I don’t think anyone is making a decision to hire you based off what your water tank looks like lol
Get the How To Wash Course Here: bit.ly/HowToWash101
I just bought a brand new Hydro Tek mobile wash skid tried it out a few days ago and when I pulled the trigger it like to blew me over in the yard its no toy used the surface cleaner on my driveway with no chemicals and made it like new great machine so far.
Pretty solid
That's a bad ass machine!!
Shiii
OG Skunk trailer 🦨😜
I have a IBC tote and I love it because my company signage is on all four sides. I made sure my tote was clean, and I also have the proper filtration.
What is the proper filtration?
@@mixedberries4937 get a banjo in line filter
I just listened to 'Left in the bottle' from your 'Next Chapter' album for the first time. Awesome song, I love it. The music is great, your voice sounds great. Really, really nicely done.
Thank you 🙏🏼
My IBC tote had 275 gallons kikkoman soysauce so I tell my customers their house should smell like American Chinese food when I’m finished.
Hahaha hell yea.
WUT IT DO BUBBA 🌽 💪💯
My fellow Tennessean go getter
I got a few hot water rigs and one with reclamation 👍 for specific jobs we clean
However I do a ton of gas stations ⛽️
Yes you have to charge cause it’s EXPENSIVE buying filters and permits and etc etc 👍
WASH ON BROTHER
Amen
Nice rig to get the money's for those accounts. It prints money how it sits. Dude will be pretty stacked after.
Yessir
I wish I could have picked up a Hydrotec, went with the Simpson belt drive 4200/4gpm. Def going with the Hydro 10gpm next go round in 6 months.
Honda is Honda
Number 9 🤘
Dude you have almost everything I have. Thats crazy. I run Kohler 26.5 EFIs with Legacy 10.4 gpm pumps @ 3600psi's. Gotta keep those Mondo 49's happy.
But anyway. Just curious to your input to this question.
When I'm running my Simpson Commercial Belt drive 4gpm 4200psi machine. It loves to eat the thread sealer until you get a 3' stream of water squirting out the side, we all know how annoying that shizzle is. Happens all the time. I used TFE paste, nothing. Teflon tape nothing, blu teflon tape nothing, Tru Blue paste lasted the longest (maybe a week) but nothing in the end. So I'm curious to what your using for thread sealant. Also I go through male and female stainless steel fittings and brass fittings like candy. I buy bags of viton seal for my female ends by the hundreds. I don't think i ever had a quality fitting that lasted a week. Any personal experience would be greatful. I'm going to try Permatex Thread Sealant next, thats as soon as it gets delivered.
What’s your unloader set at?
@@AaronsLeanMeanAcademy hmm not sure to tell the truth.
Alright so unloader was set at 4200psi. At the machine i was getting 4200 until i squeeze the trigger then i get 2700. Long story short, ended up being those big fat seals at the top of the pistons. All good now.
What brand filter are you running?
Hi! I am just starting to get into pressure washing. And I really don’t want to take the chance to mess up a house. I know how to mix the bleach but if I can just pressure wash it and get the house clean and if I have any tough areas to use bleach is that OK? Or should I be using chemical on the entire house.
I’d get the how to wash course with Mike Vidan. He covers all this in detail. bit.ly/HowToWash101
Which rig or skid do you recommend for a new guy? I've got funds ready to start, and I want to have hot water 💧 on the rig.
How much you got?
@@AaronsLeanMeanAcademy I'm liquidated some assets, I should end up with 9-10k budget for equipment
@@AaronsLeanMeanAcademy do you have a recommendation for a rig that would fit within my budget? I really value your opinion; I'm hoping to purchase equipment in the next 3 months
Don't care for the free tank, most costumer dond even know🤷🏽 But we, the power wash operators do and that's what bothers us inside lol 😆😆😆 but on the other hand I cand wrap my head on having like 15k on equipment and a water tank on a flimsy trailer. That madness and dangerous.
It’s a decoy.
I prefer an IBC tote. I can’t see spending $500 plus for a water tank. Chemical tanks yeh no problem. I don’t think anyone is making a decision to hire you based off what your water tank looks like lol
Could be, but I don’t like em.
@@jesusson3475 sold
@@jesusson3475 space = $$
Law on reclaim is clear. Charge if ya want but you’ll be charged if you ignore the law, as will your client.
I guaranteed nowhere in Alabama is that law enforced.
Yo bro I’m ready to start I need to contact you about buying a trailer . Get at me brother ! I’m from Austin tx
Reach out to Coty at SoutheastSoftwash.com
Bro finna invest my savings . Ready to become my own boss thanks bro looking into buying your course as well .
@@youngwill2709 let’s go
Now that's a mean freak or nature
Compact killer
Every single video is trying to sell you something lol
It’s my duty.
Charge extra?!?!? Hell I don’t know why you ain’t doing everything for free!!! 😂
Literally what everyone wants.
"It's true" hahaha
Reclaim is 1000% not part of the game! PGGU! WAY UP! lol
Wayyyy TF up.
👍💵
Hey big daddy AP, would you do this fella a favor and send me your email addy