Thanks for the video Billie! I had a skin replaced a while back and I really considered doing it myself now I feel comfortable enough that I will do it myself next time and even make a video about it.
Great video, I just did our Seadoo seat. My one word of advice is just buy the right tools. I used a screw driver and pliers and ended up with a ton of bleeding knuckles. Only took my about 1hour including taking seat off and putting back on, but would’ve been tons easier with staple remover.
Hello! Beautiful shop and work! I do mostly custom auto upholstery but I have a new boat project. One question though… do you seal or waterproof any seams?
Since they didn't answer you and I am in the Marine canvas and upholstery business I can offer what I do. You have 2 options for "trying" to keep the water out of the foam. You can do one or both options together. 1) any seam can be sealed with a basting tape, and 2) you can wrap the foam with silk film.
Hello! Was the vinyl used on my 1994 SeaRay 220 BRS of high as quality as what comes in the Malibu? Mine was well cared for by the two previous owners, but may consider replacing all the upholstery after this season.
Why is Vinyl the choice of material for Marine manufactures? Why not like the same material used for higher end patio furniture, seems like that would last longer.
I’ve been upholstering about 31 years now,. Building Catnapper / Jackson’s furniture, I’ve went part time and doing some upholstery at home,. A lot of people has wanted me to do some boat seats, iv had a guy bring me a couple seats to try and learn on, I’ve got them apart, I usually use the old cover to make a new pattern, problem is, is how to flatten the old cover so I can get the right cut ? I’m pretty sure I’m going to go about this the hardest way because I don’t know the tricks yet,. Lol ,. Could you give a pointer or two ?
I have a 2005 Skeeter SX190 I would like to get new seat skins for. Do you have the pattern for this boat? Also how much does it cost to get just the drivers and passengers seat done. I wont be replacing the center section its not that bad.
Hey there, my dad and i are in the market for a new boat, currently on a 96 205 prostar... any recommendations? weve found some awesome listings but most out of state (we're in nor cal) if you dont mind sharing, how much did it cost to ship your 08 vlx from Florida? our price range is $30k-$40k, any models you know of to be on the look out for?
Not all marine vinyl is the same quality. Some boat vinyl has a thicker color layer so if replacing make sure you clarify the color thickness you are buying and utilize vinyl that has is thicker color depth and will last much longer. Some OEM vinyl is not really the best quality.
Thanks for the video Billie! I had a skin replaced a while back and I really considered doing it myself now I feel comfortable enough that I will do it myself next time and even make a video about it.
Most people could do cushions. Make sure you use stainless staples.
Great video, I just did our Seadoo seat. My one word of advice is just buy the right tools. I used a screw driver and pliers and ended up with a ton of bleeding knuckles. Only took my about 1hour including taking seat off and putting back on, but would’ve been tons easier with staple remover.
FYI, there are great ceramic coatings available for upholstery that will protect old and new vinyl.
Can you suggest a few?
Drive me nuts watching him use the blade. I would use a blade in a cutting tool.
Great video!! When you have the time may you please tell me what tool you used to remove the staples. Thank you so much.
Hello! Beautiful shop and work! I do mostly custom auto upholstery but I have a new boat project. One question though… do you seal or waterproof any seams?
Since they didn't answer you and I am in the Marine canvas and upholstery business I can offer what I do. You have 2 options for "trying" to keep the water out of the foam. You can do one or both options together. 1) any seam can be sealed with a basting tape, and 2) you can wrap the foam with silk film.
@@chrishowell9499 Thanks so much! I appreciate you!
Hello! Was the vinyl used on my 1994 SeaRay 220 BRS of high as quality as what comes in the Malibu? Mine was well cared for by the two previous owners, but may consider replacing all the upholstery after this season.
Why is Vinyl the choice of material for Marine manufactures? Why not like the same material used for higher end patio furniture, seems like that would last longer.
Vinyl has good UV resistance and is far more durable than upholstery on lawn furniture.
I’ve been upholstering about 31 years now,. Building Catnapper / Jackson’s furniture, I’ve went part time and doing some upholstery at home,. A lot of people has wanted me to do some boat seats, iv had a guy bring me a couple seats to try and learn on, I’ve got them apart, I usually use the old cover to make a new pattern, problem is, is how to flatten the old cover so I can get the right cut ? I’m pretty sure I’m going to go about this the hardest way because I don’t know the tricks yet,. Lol ,. Could you give a pointer or two ?
I have a 2005 Skeeter SX190 I would like to get new seat skins for. Do you have the pattern for this boat? Also how much does it cost to get just the drivers and passengers seat done. I wont be replacing the center section its not that bad.
Hey there, my dad and i are in the market for a new boat, currently on a 96 205 prostar... any recommendations? weve found some awesome listings but most out of state (we're in nor cal) if you dont mind sharing, how much did it cost to ship your 08 vlx from Florida? our price range is $30k-$40k, any models you know of to be on the look out for?
About 1600. Got it with Uship. The 06-08 vlx or lsv will allow you to make good waves.
Malibu Hull V23 is same hull on more than one model. My 08 vRide is the 21’ Ride which is the V23 Hull. This boat was the Wakesetter in prior years.
what about a 18ft bass buggy suntracker pontoon can you do those skins
they do it all
How can I get a bid on my skins?
Not all marine vinyl is the same quality. Some boat vinyl has a thicker color layer so if replacing make sure you clarify the color thickness you are buying and utilize vinyl that has is thicker color depth and will last much longer. Some OEM vinyl is not really the best quality.
How do I order a spotters seat cover 2000 Sportster?
You would have to send them your skins.
how can i order new skin for 2001 Mariah 192
Send your skins to them.
long intro lost me for good. Why do you think you are a radio station with commercials?