"guma ma ujemna rozszezalnosc cieplna" - i co to oznacza w praktyce? Bede musial wymienic uszczelke w swoim, takze moge uzyc sposobu pokazanego tu na filmie czy nie? Bo nie wiem jak interpretowac twoj komentarz?😅
Oh and I don't have a tension/torsion wrench but neither did the original mechanics so i did it up till it couldn't be tightened anymore and that will have to do..... we'll see
Good day, come easy, while checking the spark plugs today, the spark plugs were oily as if I took them out of the oil, what could be the reason, what could be the bidet misfire in the vehicle pejo 307 1.6 16v 2004 Model Thank you very much for your interest and interest
So my 307 was emitting a blueish-white smoke and doesn't overheat, but seems to misfire a little. The gasket is clearly leaking because you can see oil around it. I'm about to fix it and I hope everything works when I'm done.
I think PSA changed the design somewhere around 2004/2005. So you have the same engine but 2 different covers and gaskets depending on the production year/month. Same with the oil filter design and (I think) parts of the air intake. Don't ask me how I know. 😉
I got fhat plastic gasked plus beside that i got some red paste and still got bit oil leak.. Will new gasket fix that? Im planing to disamble, clean ans put new one without paste, or i need paste too?
Hi I have a 2005 peugeot 407 sw 1.8 litre petrol. it has 146000 miles on it but every two months I have to top up the oil. I did notice that their is some oil around the rocker cover on the back. my question is. Should I follow the same process in stopping the leak? thanks
Hi Anthony, I woud recommend you to buy the correct gasket and replace it. If you are very low on money you can try this repair. It has been working fine with my car and I have been driving over 15.000 km afterwards. I see no problem up until the day today - keep in mind that it will always be better with propper gasket :) Cheers
All EW family 1.8/2.0/2.2 are good engines without chronical problems that kill the engine, the same for this TU5. Head gaskets or even head covers are normal to be changed after some years of use in all cars.
I haw broken my cover coz a wrong gasket, I received gasket weth pleh but i nedet onli rober, cover is shallower. Same engine TU5JP4 NFU 1,6 307SW two different cover caps same engine.
"Good luck with your Peugeot"
Thats what we need, really.
Thanks for the video, gonna do it soon for my beloved 407.
Thank you very much!
You just made my day!
I´m sure that many will appreciate your Video.
Thanks! I probably would have bought those cheap ones if I hadnt watched this before.
Спасибо за подробное видео!!!!! 👍👍👍
guma ma ujemna rozszezalnosc cieplna ... genialny film :D
"guma ma ujemna rozszezalnosc cieplna" - i co to oznacza w praktyce? Bede musial wymienic uszczelke w swoim, takze moge uzyc sposobu pokazanego tu na filmie czy nie? Bo nie wiem jak interpretowac twoj komentarz?😅
Thank you so much! I just finished mine and it went really well thanks to your explanation.
Oh and I don't have a tension/torsion wrench but neither did the original mechanics so i did it up till it couldn't be tightened anymore and that will have to do..... we'll see
Great video greetings from chile !
Thanks Bastian! I appreciate it!
Good feedback always motivates to do more :)
Cheers!
Good day, come easy, while checking the spark plugs today, the spark plugs were oily as if I took them out of the oil, what could be the reason, what could be the bidet misfire in the vehicle pejo 307 1.6 16v 2004 Model Thank you very much for your interest and interest
So my 307 was emitting a blueish-white smoke and doesn't overheat, but seems to misfire a little. The gasket is clearly leaking because you can see oil around it. I'm about to fix it and I hope everything works when I'm done.
Thanks
I think PSA changed the design somewhere around 2004/2005. So you have the same engine but 2 different covers and gaskets depending on the production year/month. Same with the oil filter design and (I think) parts of the air intake. Don't ask me how I know. 😉
Just Buy the proper gasket
Thank you!!
Do you have a video for electric power steering pump removal
I didn't see you put the plastic gasket back in.
the proper gaskets are like £12 each......cover off...pull out plastic part...replace....half hour job for both gaskets....simple
Can you share some links where I can buy these in this price? Thanks
@@pawelczar di you also put back the cover gasket also
Can you do a video on the a/c unit inside the passenger side
Will You plan upload engine mounts replacing videos regarding peugeot 307?
Great video!!
So you just add hi temp silicone and not change the old rubber seal?
Hi Khairun,
Yes, I did exactly that :)
I am glad you like it.
Cheers
Hi, I have oil in coolant in my peugeot 307, 2008, bioflex . What could be the problem
So you just used your old seal with silicon, right?
Do i need to silicon everything if my seal is new?
Hello,
Please, where is locate PCV valve?
I got fhat plastic gasked plus beside that i got some red paste and still got bit oil leak.. Will new gasket fix that? Im planing to disamble, clean ans put new one without paste, or i need paste too?
thanks for the vid, quick question, should there be oil in the valve cover?, all that oil i see must it be clean before i seal the cover back?
Hi I have a 2005 peugeot 407 sw 1.8 litre petrol.
it has 146000 miles on it but every two months I have to top up the oil.
I did notice that their is some oil around the rocker cover on the back.
my question is.
Should I follow the same process in stopping the leak?
thanks
Hi Anthony,
I woud recommend you to buy the correct gasket and replace it. If you are very low on money you can try this repair. It has been working fine with my car and I have been driving over 15.000 km afterwards. I see no problem up until the day today - keep in mind that it will always be better with propper gasket :)
Cheers
Hi! Very good information. I have some problems about engine air intake in Peugeot 307. Could you help / consultate me about this system?
Hi , I have a 307 cc 2004 my problem is after let the car worm the engine start to shake so what’s the problem, thanks for your consideration
q
Qwick fix: can you make a vedio on water leak. water pipes broke
Czyli nie bawić się w uszczelki .. tylko sylikon dać ?
How to peugeot valve seal oil leak
Dear sir how to timing set
Would you say the ew10j4 a reliable engine?
Hi Zhai,
I have not worked with ew10j4 engine yet. Not much I can say about it.
The one on the video is 1.6 16v model NFU (TU5JP4).
Cheers
All EW family 1.8/2.0/2.2 are good engines without chronical problems that kill the engine, the same for this TU5.
Head gaskets or even head covers are normal to be changed after some years of use in all cars.
This is the pre VTi engine?
This is the TU5JP4 before the 1.6 EP6 VTi.
can i know what that hose from valve cover for ? is that valve cavuum ?
Hi Muhammad,
What hose do you mean? Let me know the minute in the video.
Cheers
Is It Fixed Yet ? at minute 1.53 what that 2 hose for ?
It’s a breather hose
did you get any error code for this leak..?
Hi Wolfcaster,
No, car's PC do not see such details. It would be visible if my oil level decreased significantly. Not before.
Cheers!
Wrong gasket dude...this is for 206 caps!
Hi Saxo,
206 1.6 and 307 SW 1.6 have the same engine - NFU (TU5JP4). Are you saying the caps are different even though the engine is the same?
Cheers
I haw broken my cover coz a wrong gasket, I received gasket weth pleh but i nedet onli rober, cover is shallower.
Same engine TU5JP4 NFU 1,6 307SW two different cover caps same engine.
@@debelguzi How do you know if you need the tall one without opening engine?
This video should be instruction what NOT to do for replacing valve cover, omg...
What a joke of a design
I didn't see you put the plastic gasket back in.