Hi Tom , If I have an EV charger that has 10 kA SCCR and upper stream components/ protection and available fault current from the transformer secondary is 25KA will that be an issue ? Or it shan’t matter if there is not a fault on the DC side of EV output or the in the vehicle battery ? Your input please
An air compressor would make a better example than a treadmill. A compressor starts at full voltage and at full load. A treadmill has a drive which gradually ramps up the speed thus eliminating most of the inrush current. Besides I wouldn't want to be on the treadmill if the full voltage were applied. I would be thrown off it.
; EATON's Power Systems Experience Center is the ideal place to see ; LV/MV fuses in action - fused cutouts - MCCs - safety switches - ; fusible disconnects - control panels. ; Learn about BUSSMANN fuse applications - ; protective device selective coordination.
I like the way Eaton presents, I love the SCCR video, it is big subject explained very simple.
Said hi to you at NTI this year. Thanks for all the great vids and info.
I wish I had colleagues like them.
Can’t believe the fuses I use everyday know my name
Could you explain how to choose between the Class T fuse and the HRC fuse like NT00?
For the main fuse of a lithium battery, feeding an inverter.
Hi Tom , If I have an EV charger that has 10 kA SCCR and upper stream components/ protection and available fault current from the transformer secondary is 25KA will that be an issue ? Or it shan’t matter if there is not a fault on the DC side of EV output or the in the vehicle battery ? Your input please
Thanks, good presentation.
Wish you could do all your videos in english..usually miss out alot on those done in German
What a great video love it detail
Brilliant, thanks a lot.
❤❤❤❤❤
Excellent good explanation
Well-explained.
Where can I buy in VietNam ỏr China?
Please show us OCP for a 48V 120AH lithium-ion battery, to safely interrupt an accidental dead short!
An air compressor would make a better example than a treadmill. A compressor starts at full voltage and at full load. A treadmill has a drive which gradually ramps up the speed thus eliminating most of the inrush current. Besides I wouldn't want to be on the treadmill if the full voltage were applied. I would be thrown off it.
; EATON's Power Systems Experience Center is the ideal place to see
; LV/MV fuses in action - fused cutouts - MCCs - safety switches -
; fusible disconnects - control panels.
; Learn about BUSSMANN fuse applications -
; protective device selective coordination.