part 1: spider base. 0:00 - 18:27 part 2 spider top. ? part 3 spider arm. 18:28 - 42:15 part 4 battery 42:30 - 43:46 part 5 spinner 43:59 - 45:57 part 6 spacer 46:20 - 47:10 part 7 electrical connector 47:14 - 51:40 part 8 piller 51:43 - 54:40 part 9 fan 54:42 - 1:01:56 part 10 motor 1:02:00 - 1:11:02 part 11 distribution board 1:11:06 - 1:17:45 part 12 electrical units 1:17:50 - 1:22:26 part 13 electrical units 2 1:22:31 - 1:30:53 part 14 sub assembly electrical board 1:30:57 - part 15 final assembly - 2:07:28
part 1: spider base. part 2 spider top. part 3 spider arm. part 4 battery part 5 spinner part 6 spacer part 7 electrical connector part 8 piller part 9 fan part 10 motor part 11 distribution board part 12 electrical units part 13 electrical units 2 part 14 sub assembly electrical board part 15 final assembly
Took me 4 hours to do it from start to finish. Really easy to follow, the real lesson is in the many techniques and shortcuts when actually using solid works and assembly construction.
Thank you very much for this perfect tutorial . I really enjoyed following the video and desing the drone step by step . It is a woth help to my MSc thesis . 🌹🌹🌹
sir your tutorial is best but first off all you should keep the blue print of the object so that we can try first and if we have any doubt we can see this video
Hello, it is a wonderful tutorial i really like it and actually i want to ask you about the choice of dimension of each piece ,Do you have a reference ? or u have them ? or calculate them ? Thanks ^^
Cool tutorials, this isn't the first one from you I've watched... It's just weird that you don't fully define things... Also, there are some points that you could have 'made equal' or 'mid point' which would allow you to easily change dimensions in the future without the whole thing going haywire. Either way, good work! Thanks!
sir in the first step of making spider they are not going to extrude they need a fully define sketch while we dont have fully define .....sir how can i fix it?
Thank you for this interesting tutorial. Overall very good you use of features, in some parts such as the fan it wasn't accurate but it can do the job. Also , piller wasn't mated properly. but still very good work
In motion study i dont have a option motion analysis and when i'm animating it,the blade are rotating 6sec clockwise and 6sec anti clockwise.please help me out.Thank you.
sir my quadcopter is not running well and last day i upen then is not show all parts and assemblies parts and is only show nuts and bolts what can i do please response anyone please suggest me.
For the 3rd part, at 40:38 I cant fillet. I think there are some part that you skipped, where you edit and twerk a little bit there, but it left a big impact towards my drawing as I follow your tutorial step by step :(
Hello I have a problem with solidworks when ensambling I can not move the parts in order to select faces. For example I was trying to apply a width restriction to a ring I could select the front face but I could not select the back face because there is not menu to do it. What keys do I have to use? thank you
In assembly of ball bearing when making the mating process you selectb both inner Ring and Outer ring and applied "Width" mating, What I m trying to know is how you rotate the pieces in order to select the faces? I can not rotate and is a problem I have when trying to follow you assembly videos, I made all the pieces but if I have to rotate them I can only select one face. I try to right click menu as usual and there is not the options to make zoom or rotate and the other when skteching. Thank you so much
Sir can you provide us with the pdf having all dimensions so that we can practiced them without watching each and every step an when we get confused we will watch the video...
part 1: spider base. 0:00 - 18:27
part 2 spider top. ?
part 3 spider arm. 18:28 - 42:15
part 4 battery 42:30 - 43:46
part 5 spinner 43:59 - 45:57
part 6 spacer 46:20 - 47:10
part 7 electrical connector 47:14 - 51:40
part 8 piller 51:43 - 54:40
part 9 fan 54:42 - 1:01:56
part 10 motor 1:02:00 - 1:11:02
part 11 distribution board 1:11:06 - 1:17:45
part 12 electrical units 1:17:50 - 1:22:26
part 13 electrical units 2 1:22:31 - 1:30:53
part 14 sub assembly electrical board 1:30:57 -
part 15 final assembly - 2:07:28
Please watch the video once again.
For those wondering part 2 is at 14:18
Thanks for the time stamps
thankyou for making my life easy
part 1: spider base.
part 2 spider top.
part 3 spider arm.
part 4 battery
part 5 spinner
part 6 spacer
part 7 electrical connector
part 8 piller
part 9 fan
part 10 motor
part 11 distribution board
part 12 electrical units
part 13 electrical units 2
part 14 sub assembly electrical board
part 15 final assembly
how can I get the drawing dimensions please?
thanks
Took me 4 hours to do it from start to finish. Really easy to follow, the real lesson is in the many techniques and shortcuts when actually using solid works and assembly construction.
I didn’t find it easy to follow at all
Thank you. Really good tutorial. Never knew how to use solidworks before but completed the whole model.
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Your tutorials are very good easy to follow and help a lot to add my skills in solidworks. Thanks for your time in putting this online.
Guys, please welcome to our channel to jump from beginner to expert level !!
I really appreciate the help. the steps are so easily taught that we can use it in any other projects. Thank You so much.
Thank you very much for this perfect tutorial . I really enjoyed following the video and desing the drone step by step . It is a woth help to my MSc thesis .
🌹🌹🌹
I just finished it. Truly amazing. Thank you sir for your time. Thank you so much.
really good tutorial, help a struggling freshmore to startup building this drone. thanx!!!!!!!
just follow the video instructions you will achieve it sure Xiaomeng Wu
yep, Thanks sir, it is precious for me, follow your tutorials
Trọng tđh Thanks,
Thanks man.I'm going to improve in the Solidworks,thanks to you.
Thanks,
Thanks sir. this video is so easy to understand
You are the best
This is really Amazing Lesson!! Thank you so much!!
Thanks mate one of the best tutorial :D
Awesome work!
So enlightening this video really boosted my
skills
Finished!! Thanks very nice Dron :)
Thanks
sir your tutorial is best but first off all you should keep the blue print of the object so that we can try first and if we have any doubt we can see this video
So beautiful and interesting, and clever! thank you.
Very nice tutorial
best channel,very good
Another fantastic job! Thank you!
thanks i hope you enjoyed.
wow great doing , can`t wait for more videos
wow,i want to draw it now.thank you so much
Thanks i am sure you will enjoy.
sir, your rectangle at 50:05, is undefined. Is that a mistake? or on purpose?
Hello, it is a wonderful tutorial i really like it and actually i want to ask you about the choice of dimension of each piece ,Do you have a reference ? or u have them ? or calculate them ? Thanks ^^
sir,
your tutorials are amazing
can you give any tutorial of helicopter ?
i will try,
Very impressive design, but please can we have the full dimension on pdf. i would like to design it and see how to another one. Thanks for answering.
Lucid Language, simple steps.....
Sir can please demonstrate a SCARA Robot
i will try,
Guruji, you are great!
Welcome, & all the best for the projects,
wow cool... that's very nice..
l'll try to draw it...💪
thanks i hope you enjoyed.
👍👍
sir,
can you give tutorial of hydraulic turbine equipment like, GUIDE VANE, NOZZLE TIP, TURBINE BLADE, CASING etc....
very gentle man
gracias por tu tutorial, me fue de gran ayuda...❤
very useful sir, nice tutorial
Manish Reddy thanks
nice work, I used this in my project. thank you
Cool tutorials, this isn't the first one from you I've watched... It's just weird that you don't fully define things... Also, there are some points that you could have 'made equal' or 'mid point' which would allow you to easily change dimensions in the future without the whole thing going haywire. Either way, good work! Thanks!
Thanks, I'll do this for my project...
All the best,
Good work bro keep itup
HI SIR Thanks for your videos . upload 2d sketch diagram in this videos
sir in the first step of making spider they are not going to extrude they need a fully define sketch while we dont have fully define .....sir how can i fix it?
Thank you for this interesting tutorial. Overall very good you use of features, in some parts such as the fan it wasn't accurate but it can do the job. Also , piller wasn't mated properly. but still very good work
thanks,
VERY GOOG!!!
Thanks,
I cant wait to draw it woww thx
You must share the dimensional drawing of the project as well.
So we can practice on our own
Nice video sir
In motion study i dont have a option motion analysis and when i'm animating it,the blade are rotating 6sec clockwise and 6sec anti clockwise.please help me out.Thank you.
in Animation mode also you can give motion, you can increase 6 to infinite seconds, just drag the assembly cursor to requires seconds. & recalculate.
Super
I LIKE IT!
Thanks,
I did it Mann!!
Thanks a lot sir....
Hi can you please design Mistral Xherpa drone with full guiding steps?
sir my quadcopter is not running well and last day i upen then is not show all parts and assemblies parts and is only show nuts and bolts what can i do please response anyone please suggest me.
Thank you sir..
Bravo👋👏👍
How can i get the dimensions of the parts i want to practice myself first. if anyone have that in pdf format share the link.
Copy from the video.
Thanks verrrrrry much
Thank you very much for this video. But I have questions, how can you attach the spinner and the motor? What are four holes of the spinner used for?
Đặng Công Bùi hi, this is not accurate & complete design, still it need to many corrections,
Ah I see. Still a great video though. Thank you very much
Buen Trabajo ;) eres un Crack
thanks that is very nice
thanks i hope you enjoyed.
Thank you very much
Hi, great video I am learning from them. but how do you remember the dimensions do you pre-design in Cad and then create a 3d model?
i can't remember all dimensions, pre design & make the tutorial,
thank you so so much
merci beaucoup !!! quel boulot
thanks i hope you enjoyed.
Hi, your tutorials are amazing. Would you share your files with us.
good evening, I would like this project in professional INVENTOR :(
For the 3rd part, at 40:38 I cant fillet. I think there are some part that you skipped, where you edit and twerk a little bit there, but it left a big impact towards my drawing as I follow your tutorial step by step :(
Hello I have a problem with solidworks when ensambling I can not move the parts in order to select faces. For example I was trying to apply a width restriction to a ring I could select the front face but I could not select the back face because there is not menu to do it. What keys do I have to use? thank you
width mate you can apply only flat surfaces it will not work on circular or angular faces all the selected faces should be in one axis.
In assembly of ball bearing when making the mating process you selectb both inner Ring and Outer ring and applied "Width" mating, What I m trying to know is how you rotate the pieces in order to select the faces? I can not rotate and is a problem I have when trying to follow you assembly videos, I made all the pieces but if I have to rotate them I can only select one face. I try to right click menu as usual and there is not the options to make zoom or rotate and the other when skteching. Thank you so much
thanks sir.. hope i can do it in CREO .
I have 2016 version .but .surface and sheet metal option is not there ......like there is a sketch option......what to do? ....please reply !!
Hi sir, I'm doing exactly what you're doing but I don't getting the same fillet as you're having at 40:30. Can you help me?
Sir can you provide us with the pdf having all dimensions so that we can practiced them without watching each and every step an when we get confused we will watch the video...
How to make cylindrical Cam and set with Cam follower
Sir please make video on how to design drone on autocad
i have future plan for Autocad tutorials,
Sir, I need this CAD model file for a project, can you please share it with us ?
hi, this is great, i like it very much. did you print it and added the electric system??
Motion analysis is not in my solidworks ?? How can i do motion
fantastic ..
thank you.
Thanks,
Can I do the same in Solid Edge ??
Hi, Why can't I insert hex nuts? the nuts just wont come out after draging and if I click ok on the box, all my assembly file turns red. help please
Thank you very much for this video, but can i find the sketchs of this project.? where ...
again Thanks
Hi, do you have the drawings/illustrations for the drone?
guys which version of solid works is this
I want this drawing with dimensions
what kind of things that I am going to learn in joining by monthly subscription
hi, can i do it in solid edge?
Thanks a lot.
welcome, please share our videos which is help us to do more and more in Solidworks thanks,
where can i get the eng drawings?
Hey, can you do a drop test on it?
thanx for it
how much specifications needed for this animation?
THANKS MAN
I can't increase the size of a screw to
which analysis we can do for this ?
drop test ,thermal analysis,
How many parts is this project??
can you please provide the 2d drawing with dimensions for this projects. it is better to understand if we get the 2d drawing with dimensions.
Does any know how to do analysis of this?